Cables

SensorsCables

Viewing Page 17 of 30 (294 results)

.

Item #: CSB3-M1281M1282-LH

Supplier Part #: 14418

Brand: Banner Engineering

Splitter M12F Euro to M12M and M8M connectors, 5 Pin, Non-Shielded, IP67, AWG 24, Black PUR cord, Straight Connectors, Trunk: 0.3 m, Branches: 0.6 m

More Info

Call

NOT CURRENTLY IN STOCK

QTY:

Cordset: for EZ-SCREEN LPM 12-pin M12 T

Item #: CSM4DO-M12121FM12121M

Supplier Part #: 19026

Brand: Banner Engineering

Cordset: for EZ-SCREEN LPM. Euro M12 12-pin Trunk, Branch 1 and 2 Euro M12 5-pin connector, Branch 3 Euro M12 8-pin connector, Branch 4 Euro M12 12-pin connector, Dark operate

More Info

$152.00 /EA

NOT CURRENTLY IN STOCK

QTY:

GERMAN RCP RJ 8WIRE 3AMP

Item #: EP-RJ45-R-32

Supplier Part #: EP-RJ45-R-32

Brand: Mencom

A Panel Interface Connector (PIC) is a device that typically mounts to the outside of a control panel housing a PLC, computer, or other type of programmable device. Once in place, the PIC, which houses convenient pass through connections, allows the user to interface with the computer, PLC, or other devices inside the control panel. These convenient access ports eliminate the need to open the panel door, creating a safer environment on the shop floor, and helping the user adhere to the safety standards set forth by NFPA 70E. With well over 2000 designs, Mencom is sure to have the configuration you need. If we do not, just contact one of our design engineers and we will work with you to create the solution you need.

$215.35 /EA

NOT CURRENTLY IN STOCK

QTY:

SZ24 MULTI-HOLE PLATE 22 OPNGS

Item #: KADP-24-22

Supplier Part #: KADP-24-22

Brand: Mencom

KADP cable entry system offers a simpler and faster assembly for inserting and sealing cables for enclosures, machines and junction boxes. Through the pre-punched membrane, standard cables with diameters from 1.5mm to 20mm can be simply pushed into the control cabinets, panels or machines, and sealing with an IP66 rating. In comparison to traditional cable glands and cord grips, the cable entry system provides 10 times faster assembly time and a higher packing density, thanks to the tight fitting entry points. In addition, it takes 50% less space than the traditional solutions, which is ideal for cabinets with limited space. The frame of the cable entry plate is made of a robust hard plastic molded with industry grade elastomer and it provides a simple & quick tool-free installation by snapping it into a rectangular opening. The KADP series fits into a standard cutout for the size of 24-pin industrial multipole connectors (11mm x 36mm) and can be mounted in a wall with a thickness from 1.5mm to 2mm. If the thickness is greater than 2mm the cable entry plate can be attached with M5 screws.

$72.70 /EA

NOT CURRENTLY IN STOCK

QTY:

8 PRT 4 WR JBOX W/MCV-12MR

Item #: JDC-840-012-V000

Supplier Part #: JDC-840-012-V000

Brand: Mencom

JDC junction blocks provide convenient connectivity for multiple devices using the MDC (M12) connector. The simple plug and play design of these products drastically reduce installation time and minimizes down time. These junction blocks are offered in 4, 6, 8, 10, and 12 port configurations with a wide variety of home run options. The multi-port blocks are readily available with 3, 4, or 5 pins loaded per port, and with no LED, PNP, or NPN circuitry.