Search in Category
Filter Your Search
Shop by Category
Wireway
Lay-In Wireway Type 1 Screw Cover - Pain
End Caps with Knock Out
ERIFLEX FLEXIBAR 3MTC 2X20X1
100% production dielectric tested; Reduces total installation cost; Connections made by punching and bolting directly through the copper laminates, clamping onto the end of the nVent ERIFLEX Flexibar, or welding using nVent ERICO Cadweld; RoHS; Bureau Veritas – ACE 14/163/02; Tinned copper allows for copper or aluminum conductor connections; UR – ANSI/UL 67, ANSI/UL 891; Thin layers of tinned electrolytic copper formed into a stack; Better power density than cable with lower skin effect ratio; Easily bent, folded, and twisted, improving assembly flexibility, shortening connections, and decreasing footprint; ABS; UL 758 Appliance Wiring Material requirements for Cold Bend testing at -40°C and -50°C (-40°F and -58°F); CSA – CSA C22.2 No. 0, CSA C22.2 No. 210; RoHS compliant; Insulated by high-resistance, self-extinguishing PVC with less than 20% contact with conductor for high flexibility; UR – ANSI/UL 758; cUR – CSA C22.2 No. 29, CSA C22.2 No. 244; CE, ERIFLEX FLEXIBAR – EN 61439-1; Dramatically smaller and more flexible than comparable cable based on ampacity; Weight savings and material savings compared to wire alternatives; No lugs needed, reducing installation time and improving resistance to vibration; Traceability codes and designation part numbers printed on insulation; EAC compliant
ERIFLEX FLEXIBAR 3MTC 2X24X1
CSA – CSA C22.2 No. 0, CSA C22.2 No. 210; Easily bent, folded, and twisted, improving assembly flexibility, shortening connections, and decreasing footprint; cUR – CSA C22.2 No. 29, CSA C22.2 No. 244; No lugs needed, reducing installation time and improving resistance to vibration; Tinned copper allows for copper or aluminum conductor connections; Better power density than cable with lower skin effect ratio; Bureau Veritas – ACE 14/163/02; Connections made by punching and bolting directly through the copper laminates, clamping onto the end of the nVent ERIFLEX Flexibar, or welding using nVent ERICO Cadweld; Thin layers of tinned electrolytic copper formed into a stack; Weight savings and material savings compared to wire alternatives; Dramatically smaller and more flexible than comparable cable based on ampacity; 100% production dielectric tested; RoHS compliant; Insulated by high-resistance, self-extinguishing PVC with less than 20% contact with conductor for high flexibility; UL 758 Appliance Wiring Material requirements for Cold Bend testing at -40°C and -50°C (-40°F and -58°F); ABS; RoHS; UR – ANSI/UL 758; UR – ANSI/UL 67, ANSI/UL 891; Traceability codes and designation part numbers printed on insulation; CE, ERIFLEX FLEXIBAR – EN 61439-1; Reduces total installation cost; EAC compliant
ERIFLEX FLEXIBAR 3MTC 4X32X1
CSA – CSA C22.2 No. 0, CSA C22.2 No. 210; UR – ANSI/UL 758; Reduces total installation cost; Bureau Veritas – ACE 14/163/02; RoHS compliant; Weight savings and material savings compared to wire alternatives; Thin layers of tinned electrolytic copper formed into a stack; Easily bent, folded, and twisted, improving assembly flexibility, shortening connections, and decreasing footprint; Traceability codes and designation part numbers printed on insulation; CE, ERIFLEX FLEXIBAR – EN 61439-1; cUR – CSA C22.2 No. 29, CSA C22.2 No. 244; ABS; RoHS; Connections made by punching and bolting directly through the copper laminates, clamping onto the end of the nVent ERIFLEX Flexibar, or welding using nVent ERICO Cadweld; EAC compliant; 100% production dielectric tested; Dramatically smaller and more flexible than comparable cable based on ampacity; UL 758 Appliance Wiring Material requirements for Cold Bend testing at -40°C and -50°C (-40°F and -58°F); Tinned copper allows for copper or aluminum conductor connections; Insulated by high-resistance, self-extinguishing PVC with less than 20% contact with conductor for high flexibility; UR – ANSI/UL 67, ANSI/UL 891; Better power density than cable with lower skin effect ratio; No lugs needed, reducing installation time and improving resistance to vibration
Busbar Clamp BC 30
Two ribbed plates complete with screws; RoHS; Allows for excellent electrical contact; RoHS compliant; Ideal for on site modifications; Installs quickly and easily; Connects two copper busbars together or nVent ERIFLEX Flexibar to copper busbar; UR – ANSI/UL 67, ANSI/UL 891
Reinforced ERIFLEXO FLEXIBAR Support 40-
Ensures correct spacing for optimum cooling; Spacers are halogen free; RoHS compliant; CE, ERIFLEX? IFBS – EN IEC 61439-1; RoHS; Supports up to eight conductors in parallel; Easy to install
Spacer Clamp FS 24
Ensures correct spacing for optimum cooling; UR – ANSI/UL 67, ANSI/UL 891; RoHS; Provides support for nVent ERIFLEX Flexibar and insulated braided conductors without damaging the insulation; Easy to install; Supports up to four conductors in parallel; Halogen free; RoHS compliant
Spacer Clamp FS 32
Ensures correct spacing for optimum cooling; Halogen free; RoHS compliant; RoHS; Supports up to four conductors in parallel; Provides support for nVent ERIFLEX Flexibar and insulated braided conductors without damaging the insulation; UR – ANSI/UL 67, ANSI/UL 891; Easy to install