Search in Category
Fuses
Search term required.
Filter Your Search
Brand
Connection
Connection Type
Country Of Origin
Current
Degree of protection (IP)
Diameter
No Filtered Results...
Frequency
Fuse Size
No Filtered Results...
Fuse Type
Height
No Filtered Results...
Length
No Filtered Results...
Type
No Filtered Results...
Voltage
No Filtered Results...
Voltage Rating
No Filtered Results...
Weight
No Filtered Results...
Width
No Filtered Results...
Wire Type
Shop by Category
Loading...
Fuses
Viewing Page 107 of 1000
(10,000+ results)
100-30A FUSE REDUCER PR
Item #:
132
Supplier Part #: 132
Brand:
Mersen
Mersen fuse reducers allow the use of lower rated fuses in existing equipment having clips with higher ampere ratings. The use of closer rated time-delay fuses can improve circuit protection. For example, renewable or one-time fuses feeding a motor can be replaced with fuses sized closer to the motor nameplate current. Non-rejection reducers will allow Class H, K or R fuses to fit Class H or K clips. Rejection-type reducers will allow only Class R fuses to fit Class R clips or only Class J fuses to fit Class J clips. Class J fuse reducers are not for bolt on applications.
$48.43
/EA
NOT CURRENTLY IN STOCK
THERMALLY PROTECTED MOV 150
Item #:
150TPMOV
Supplier Part #: 150TPMOV
Brand:
Mersen
Mersen’s patented TPMOV technology eliminates common failure modes that occur in the field with standard metal oxide varistors. Internally the TPMOV is comprised of a voltage clamping device and a disconnecting apparatus that monitors the status of the metal oxide disk, making the TPMOV a fail-safe device. In the event of an overvoltage breakdown, the metal oxide disc is securely disconnected from the system power by an arc shield. Upon failure, the TPMOV is also equipped with a visual pin indicator as well as a normally open micro-switch, providing remote indication if applicable. TPMOV7 50% more surge capacity, Same footprint The TPMOV7 is rated for 75kA - 8/20µs peak surge current and is available for maximum continuous operating voltages (MCOV) from 150V to 320VAC.
Built-in visual/remote indication optional; Wave solderable; No additional overcurrent protective device (fuses) required; RoHS Compliant; ANSI/UL 1449 4th Edition, Type 1 Component Assembly SPD, File E210793; Consistent footprint with 25–40mm MOVs; Industry-leading, patented TPMOV technology available in 50kA and 75kA surge capacities
$79.99
/EA
NOT CURRENTLY IN STOCK
150 TPMOV SHORT LEAD WITH VISU
Item #:
150TPMOVST
Supplier Part #: 150TPMOVST
Brand:
Mersen
Mersen’s patented TPMOV technology eliminates common failure modes that occur in the field with standard metal oxide varistors. Internally the TPMOV is comprised of a voltage clamping device and a disconnecting apparatus that monitors the status of the metal oxide disk, making the TPMOV a fail-safe device. In the event of an overvoltage breakdown, the metal oxide disc is securely disconnected from the system power by an arc shield. Upon failure, the TPMOV is also equipped with a visual pin indicator as well as a normally open micro-switch, providing remote indication if applicable. TPMOV7 50% more surge capacity, Same footprint The TPMOV7 is rated for 75kA - 8/20µs peak surge current and is available for maximum continuous operating voltages (MCOV) from 150V to 320VAC.
RoHS Compliant; ANSI/UL 1449 4th Edition, Type 1 Component Assembly SPD, File E210793; No additional overcurrent protective device (fuses) required; Industry-leading, patented TPMOV technology available in 50kA and 75kA surge capacities; Consistent footprint with 25–40mm MOVs; Built-in visual/remote indication optional; Wave solderable
$205.12
/EA
NOT CURRENTLY IN STOCK
150V THERMAL MOV
Item #:
150TPMOVTS
Supplier Part #: 150TPMOVTS
Brand:
Mersen
Mersen’s patented TPMOV technology eliminates common failure modes that occur in the field with standard metal oxide varistors. Internally the TPMOV is comprised of a voltage clamping device and a disconnecting apparatus that monitors the status of the metal oxide disk, making the TPMOV a fail-safe device. In the event of an overvoltage breakdown, the metal oxide disc is securely disconnected from the system power by an arc shield. Upon failure, the TPMOV is also equipped with a visual pin indicator as well as a normally open micro-switch, providing remote indication if applicable. TPMOV7 50% more surge capacity, Same footprint The TPMOV7 is rated for 75kA - 8/20µs peak surge current and is available for maximum continuous operating voltages (MCOV) from 150V to 320VAC.
Wave solderable; ANSI/UL 1449 4th Edition, Type 1 Component Assembly SPD, File E210793; Industry-leading, patented TPMOV technology available in 50kA and 75kA surge capacities; Built-in visual/remote indication optional; No additional overcurrent protective device (fuses) required; Consistent footprint with 25–40mm MOVs; RoHS Compliant
$79.99
/EA
NOT CURRENTLY IN STOCK
FUSE REDUCER 100-60A 250V
Item #:
162
Supplier Part #: 162
Brand:
Mersen
Mersen fuse reducers allow the use of lower rated fuses in existing equipment having clips with higher ampere ratings. The use of closer rated time-delay fuses can improve circuit protection. For example, renewable or one-time fuses feeding a motor can be replaced with fuses sized closer to the motor nameplate current. Non-rejection reducers will allow Class H, K or R fuses to fit Class H or K clips. Rejection-type reducers will allow only Class R fuses to fit Class R clips or only Class J fuses to fit Class J clips. Class J fuse reducers are not for bolt on applications.
$28.91
/EA
NOT CURRENTLY IN STOCK
FUSE REDUCER 100-60A 600V
Item #:
166
Supplier Part #: 166
Brand:
Mersen
Mersen fuse reducers allow the use of lower rated fuses in existing equipment having clips with higher ampere ratings. The use of closer rated time-delay fuses can improve circuit protection. For example, renewable or one-time fuses feeding a motor can be replaced with fuses sized closer to the motor nameplate current. Non-rejection reducers will allow Class H, K or R fuses to fit Class H or K clips. Rejection-type reducers will allow only Class R fuses to fit Class R clips or only Class J fuses to fit Class J clips. Class J fuse reducers are not for bolt on applications.
$49.14
/EA
NOT CURRENTLY IN STOCK
BUSSMANN 50 AMP 690 VOLT
Item #:
170M1564D
Brand:
Bussmann
Eaton Bussmann series high speed square body fuse, 50A, 200 kAIC, Combination fuse status indicator, Fuse, Din 43-620 blade end X Din 43-620 blade end, Class gR
$79.80
/EA
NOT CURRENTLY IN STOCK
630A 700V HIGH-SPEED SEMIFUSE
Item #:
170M5712
Brand:
Bussmann
Eaton Bussmann series high speed square body fuse, 1000V, 630A, 200 kAIC, None, Fuse, Blade end X blade end, Class aR
Call
NOT CURRENTLY IN STOCK
1000A 1250V HIGH-SPEED SEMIFUSE SQUA
Item #:
170M6648
Brand:
Bussmann
Fuse-link, high speed, 1000 A, AC 1250 V, size 3, 76 x 92 x 91 mm, aR, IEC, UL, type K indicator, flush end, 13 UNC
Call
NOT CURRENTLY IN STOCK
700A 700V HIGH-SPEED SEMIFUSE
Item #:
170M6711
Brand:
Bussmann
Eaton Bussmann series high speed square body fuse, 700A, 200 kAIC, None, Fuse, Blade end X blade end, Class aR - 170M6711
Call
NOT CURRENTLY IN STOCK
