Browse Categories

Search in Category

Fuses

Filter Your Search

Show Attribute Brand
Hide Attribute Connection
Hide Attribute Connection Type
Hide Attribute Country Of Origin
Hide Attribute Current
Hide Attribute Degree of protection (IP)
Hide Attribute Diameter
Hide Attribute Frequency
Hide Attribute Fuse Size
Hide Attribute Fuse Type
Hide Attribute Height
Hide Attribute Length
Hide Attribute Size
Hide Attribute Type
Hide Attribute Voltage
Hide Attribute Voltage Rating
Hide Attribute Weight
Hide Attribute Width
Hide Attribute Wire Type

Shop by Category

Fuses

Power Products/Fuses 
Viewing Page 124 of 1000 (10,000+ results)
Sort By:
View:
72KV 38R R-RATED SP IND BOLT-

72KV 38R R-RATED SP IND BOLT-

Item #: A072B2DCR0-38R

Supplier Part #: A072B2DCR0-38R
Brand: Mersen
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/aa35cd884330ef55c2e69d7afaf5b9ad8e93d185.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/aa35cd884330ef55c2e69d7afaf5b9ad8e93d185.pdf
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/eea9872ec99081e36eb250c5ab544f7befdc6bc4.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/eea9872ec99081e36eb250c5ab544f7befdc6bc4.pdf

Mersen R-Rated fuses are current-limiting, high interrupting rating fuses intended for the short circuit protection of medium voltage motors and motor controllers. R-Rated fuses are back-up fuses that have a minimum interrupting rating, and must be coordinated with overload relays in combination motor starters. The motor starter manufacturer generally specifies the R-Rated fuse size. These fuses are single, double, triple or quadruple barrels 3 inches diameter with end mounts designed for bolting directly to equipment bus or terminal pads

Blown-fuse indicator to give positive identification of open fuse; Bolt-in mounting for direct connection to bus or terminals; The Amp-Trap Bolt-in series are UL Recognized; UL Recognized File E93367; Metal embossed catalog number and manufacturing date for lasting identification; Current-limiting for superior equipment protection

$5,453.83 /EA
NOT CURRENTLY IN STOCK
72KV 57X R-RATED BOLT IN

72KV 57X R-RATED BOLT IN

Item #: A072B3D0R0-57X

Supplier Part #: A072B3D0R0-57X
Brand: Mersen
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/aa35cd884330ef55c2e69d7afaf5b9ad8e93d185.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/aa35cd884330ef55c2e69d7afaf5b9ad8e93d185.pdf
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/eea9872ec99081e36eb250c5ab544f7befdc6bc4.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/eea9872ec99081e36eb250c5ab544f7befdc6bc4.pdf

Mersen R-Rated fuses are current-limiting, high interrupting rating fuses intended for the short circuit protection of medium voltage motors and motor controllers. R-Rated fuses are back-up fuses that have a minimum interrupting rating, and must be coordinated with overload relays in combination motor starters. The motor starter manufacturer generally specifies the R-Rated fuse size. These fuses are single, double, triple or quadruple barrels 3 inches diameter with end mounts designed for bolting directly to equipment bus or terminal pads

Metal embossed catalog number and manufacturing date for lasting identification; Bolt-in mounting for direct connection to bus or terminals; The Amp-Trap Bolt-in series are UL Recognized; Blown-fuse indicator to give positive identification of open fuse; UL Recognized File E93367; Current-limiting for superior equipment protection

$19,236.53 /EA
NOT CURRENTLY IN STOCK
72kV 48X R-RATED BOLT INSP

72kV 48X R-RATED BOLT INSP

Item #: A072B3DBR0-48X

Supplier Part #: A072B3DBR0-48X
Brand: Mersen
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/aa35cd884330ef55c2e69d7afaf5b9ad8e93d185.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/aa35cd884330ef55c2e69d7afaf5b9ad8e93d185.pdf
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/eea9872ec99081e36eb250c5ab544f7befdc6bc4.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/eea9872ec99081e36eb250c5ab544f7befdc6bc4.pdf

Mersen R-Rated fuses are current-limiting, high interrupting rating fuses intended for the short circuit protection of medium voltage motors and motor controllers. R-Rated fuses are back-up fuses that have a minimum interrupting rating, and must be coordinated with overload relays in combination motor starters. The motor starter manufacturer generally specifies the R-Rated fuse size. These fuses are single, double, triple or quadruple barrels 3 inches diameter with end mounts designed for bolting directly to equipment bus or terminal pads

UL Recognized File E93367; The Amp-Trap Bolt-in series are UL Recognized; Bolt-in mounting for direct connection to bus or terminals; Current-limiting for superior equipment protection; Blown-fuse indicator to give positive identification of open fuse; Metal embossed catalog number and manufacturing date for lasting identification

$18,534.45 /EA
NOT CURRENTLY IN STOCK
72KV 57X R-RATED BOLT IN SP

72KV 57X R-RATED BOLT IN SP

Item #: A072B3DBR0-57X

Supplier Part #: A072B3DBR0-57X
Brand: Mersen
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/aa35cd884330ef55c2e69d7afaf5b9ad8e93d185.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/aa35cd884330ef55c2e69d7afaf5b9ad8e93d185.pdf
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/eea9872ec99081e36eb250c5ab544f7befdc6bc4.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/eea9872ec99081e36eb250c5ab544f7befdc6bc4.pdf

Mersen R-Rated fuses are current-limiting, high interrupting rating fuses intended for the short circuit protection of medium voltage motors and motor controllers. R-Rated fuses are back-up fuses that have a minimum interrupting rating, and must be coordinated with overload relays in combination motor starters. The motor starter manufacturer generally specifies the R-Rated fuse size. These fuses are single, double, triple or quadruple barrels 3 inches diameter with end mounts designed for bolting directly to equipment bus or terminal pads

Blown-fuse indicator to give positive identification of open fuse; The Amp-Trap Bolt-in series are UL Recognized; Current-limiting for superior equipment protection; Bolt-in mounting for direct connection to bus or terminals; UL Recognized File E93367; Metal embossed catalog number and manufacturing date for lasting identification

$18,534.45 /EA
NOT CURRENTLY IN STOCK
72KV 48X R-RATED SP IND BOLT-

72KV 48X R-RATED SP IND BOLT-

Item #: A072B3DCR0-48X

Supplier Part #: A072B3DCR0-48X
Brand: Mersen
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/aa35cd884330ef55c2e69d7afaf5b9ad8e93d185.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/aa35cd884330ef55c2e69d7afaf5b9ad8e93d185.pdf
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/eea9872ec99081e36eb250c5ab544f7befdc6bc4.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/eea9872ec99081e36eb250c5ab544f7befdc6bc4.pdf

Mersen R-Rated fuses are current-limiting, high interrupting rating fuses intended for the short circuit protection of medium voltage motors and motor controllers. R-Rated fuses are back-up fuses that have a minimum interrupting rating, and must be coordinated with overload relays in combination motor starters. The motor starter manufacturer generally specifies the R-Rated fuse size. These fuses are single, double, triple or quadruple barrels 3 inches diameter with end mounts designed for bolting directly to equipment bus or terminal pads

Current-limiting for superior equipment protection; Blown-fuse indicator to give positive identification of open fuse; UL Recognized File E93367; Bolt-in mounting for direct connection to bus or terminals; Metal embossed catalog number and manufacturing date for lasting identification; The Amp-Trap Bolt-in series are UL Recognized

$18,553.62 /EA
NOT CURRENTLY IN STOCK
72KV442mm3DIAMV FUSE 19R

72KV442mm3DIAMV FUSE 19R

Item #: A072D1DSR0-19R

Supplier Part #: A072D1DSR0-19R
Brand: Mersen
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/9699fe29c06b91e32f69e508aaccd5f7b8152f17.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/9699fe29c06b91e32f69e508aaccd5f7b8152f17.pdf
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/c54eb8db0cac8ea9f2c3c08b51db99ae2ddeae99.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/c54eb8db0cac8ea9f2c3c08b51db99ae2ddeae99.pdf

Amp-Trap® R-Rated DIN style fuses are current-limiting, high interrupting rating fuses, intended for the short circuit protection of medium voltage motors and motor controllers. This product range offers North American R-Rated performance in the IEC 282-1 DIN mounting configuration of 442mm. R-Rated fuses are applied as back up fuses that have a minimum interrupting rating, and must be coordinated with overload relays in combination motor starters. Amp-Trap R-Rated, DIN type fuses are offered in voltage ratings of 3.3kV, 5.3kV and 7.2kV in ratings from 2R to 19R. All fuses within this product group are UL component recognized. DEFINITIONS ,R-Rating R-Rated fuses are back-up fuses that operate as follows (Per ANSI C37.46-2000) An R-Rated fuse will melt in the range of 15 to 35 seconds at a value of current equal to 100 times the “R” rating ,Back-up Current-Limiting Fuses A back-up current-limiting fuse is a fuse that can interrupt any current between its rated minimum interrupting current and its maximum interrupting current. Back-up fuses are not designed or intended to open under overload conditions ,Continuous Ampere Rating at 40°C The continuous amp rating defines the thermal capability of the fuse per ANSI C37.46 and should not be the sole factor in fuse selection ,Spring-Reinforced Clip MR45 & Spring Ref.# L096472 ,Fuse-Holder SI 24/442 Ref # K209424 In compliance with IEC 282-1, DIN standard 43625 ,Note Ratings above 19R may be achieved by paralleling fuses. Please consult factory for details

Blown fuse indicator provides positive identification of open fuse. 4.5lb tripping force – 1.0”; Current-limiting for superior equipment protection; UL recognized component File E93367

$1,703.81 /EA
NOT CURRENTLY IN STOCK
72KV442mm3DIAMV FUSE 2R

72KV442mm3DIAMV FUSE 2R

Item #: A072D1DSR0-2R

Supplier Part #: A072D1DSR0-2R
Brand: Mersen
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/9699fe29c06b91e32f69e508aaccd5f7b8152f17.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/9699fe29c06b91e32f69e508aaccd5f7b8152f17.pdf
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/c54eb8db0cac8ea9f2c3c08b51db99ae2ddeae99.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/c54eb8db0cac8ea9f2c3c08b51db99ae2ddeae99.pdf

Amp-Trap® R-Rated DIN style fuses are current-limiting, high interrupting rating fuses, intended for the short circuit protection of medium voltage motors and motor controllers. This product range offers North American R-Rated performance in the IEC 282-1 DIN mounting configuration of 442mm. R-Rated fuses are applied as back up fuses that have a minimum interrupting rating, and must be coordinated with overload relays in combination motor starters. Amp-Trap R-Rated, DIN type fuses are offered in voltage ratings of 3.3kV, 5.3kV and 7.2kV in ratings from 2R to 19R. All fuses within this product group are UL component recognized. DEFINITIONS ,R-Rating R-Rated fuses are back-up fuses that operate as follows (Per ANSI C37.46-2000) An R-Rated fuse will melt in the range of 15 to 35 seconds at a value of current equal to 100 times the “R” rating ,Back-up Current-Limiting Fuses A back-up current-limiting fuse is a fuse that can interrupt any current between its rated minimum interrupting current and its maximum interrupting current. Back-up fuses are not designed or intended to open under overload conditions ,Continuous Ampere Rating at 40°C The continuous amp rating defines the thermal capability of the fuse per ANSI C37.46 and should not be the sole factor in fuse selection ,Spring-Reinforced Clip MR45 & Spring Ref.# L096472 ,Fuse-Holder SI 24/442 Ref # K209424 In compliance with IEC 282-1, DIN standard 43625 ,Note Ratings above 19R may be achieved by paralleling fuses. Please consult factory for details

Blown fuse indicator provides positive identification of open fuse. 4.5lb tripping force – 1.0”; UL recognized component File E93367; Current-limiting for superior equipment protection

$1,239.71 /EA
NOT CURRENTLY IN STOCK
72KV442mm3DIAMV FUSE 3R

72KV442mm3DIAMV FUSE 3R

Item #: A072D1DSR0-3R

Supplier Part #: A072D1DSR0-3R
Brand: Mersen
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/9699fe29c06b91e32f69e508aaccd5f7b8152f17.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/9699fe29c06b91e32f69e508aaccd5f7b8152f17.pdf
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/c54eb8db0cac8ea9f2c3c08b51db99ae2ddeae99.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/c54eb8db0cac8ea9f2c3c08b51db99ae2ddeae99.pdf

Amp-Trap® R-Rated DIN style fuses are current-limiting, high interrupting rating fuses, intended for the short circuit protection of medium voltage motors and motor controllers. This product range offers North American R-Rated performance in the IEC 282-1 DIN mounting configuration of 442mm. R-Rated fuses are applied as back up fuses that have a minimum interrupting rating, and must be coordinated with overload relays in combination motor starters. Amp-Trap R-Rated, DIN type fuses are offered in voltage ratings of 3.3kV, 5.3kV and 7.2kV in ratings from 2R to 19R. All fuses within this product group are UL component recognized. DEFINITIONS ,R-Rating R-Rated fuses are back-up fuses that operate as follows (Per ANSI C37.46-2000) An R-Rated fuse will melt in the range of 15 to 35 seconds at a value of current equal to 100 times the “R” rating ,Back-up Current-Limiting Fuses A back-up current-limiting fuse is a fuse that can interrupt any current between its rated minimum interrupting current and its maximum interrupting current. Back-up fuses are not designed or intended to open under overload conditions ,Continuous Ampere Rating at 40°C The continuous amp rating defines the thermal capability of the fuse per ANSI C37.46 and should not be the sole factor in fuse selection ,Spring-Reinforced Clip MR45 & Spring Ref.# L096472 ,Fuse-Holder SI 24/442 Ref # K209424 In compliance with IEC 282-1, DIN standard 43625 ,Note Ratings above 19R may be achieved by paralleling fuses. Please consult factory for details

Current-limiting for superior equipment protection; Blown fuse indicator provides positive identification of open fuse. 4.5lb tripping force – 1.0”; UL recognized component File E93367

$1,239.71 /EA
NOT CURRENTLY IN STOCK
72KV 4R R RATED FERRULE

72KV 4R R RATED FERRULE

Item #: A072F1D0R0-4R

Supplier Part #: A072F1D0R0-4R
Brand: Mersen
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/3094abea60eeea3674c98ef198c62e28f7ab8765.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/3094abea60eeea3674c98ef198c62e28f7ab8765.pdf
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/aae892c8433d5087e8820dadc250f9f3c46d2b12.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/aae892c8433d5087e8820dadc250f9f3c46d2b12.pdf

Mersen R-Rated fuses are current-limiting, high interrupting rating fuses intended for the short circuit protection of medium voltage motors and motor controllers. R-Rated fuses are back-up fuses that have a minimum interrupting rating, and must be coordinated with overload relays in combination motor starters. The motor starter manufacturer generally specifies the R-Rated fuse size. These fuses come with a 3 (size D) or 4 (size E) inch diameter barrels with ferrules and are mounted in spring reinforced clips

Amp-Trap: UL File E93367; 9F60: UL File E191980; The Amp-Trap and 9F60 R-Rated fuses are UL Recognized; On the 4.8kV an optional hookeye mounted in the factory is available; Blown-fuse indicator to give positive identification of open fuse; Current-limiting for superior equipment protection; Ferrule mounting for standard clips and interchangeability with other brands of fuses; Metal embossed catalog number and manufacturing date for lasting identification; On all other 3” barrels if a hookeye is required, use the operating eye 9F61AAW612

$1,296.43 /EA
NOT CURRENTLY IN STOCK
72KV 5R R RATED FERRULE

72KV 5R R RATED FERRULE

Item #: A072F1D0R0-5R

Supplier Part #: A072F1D0R0-5R
Brand: Mersen
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/3094abea60eeea3674c98ef198c62e28f7ab8765.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/3094abea60eeea3674c98ef198c62e28f7ab8765.pdf
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/aae892c8433d5087e8820dadc250f9f3c46d2b12.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/aae892c8433d5087e8820dadc250f9f3c46d2b12.pdf

Mersen R-Rated fuses are current-limiting, high interrupting rating fuses intended for the short circuit protection of medium voltage motors and motor controllers. R-Rated fuses are back-up fuses that have a minimum interrupting rating, and must be coordinated with overload relays in combination motor starters. The motor starter manufacturer generally specifies the R-Rated fuse size. These fuses come with a 3 (size D) or 4 (size E) inch diameter barrels with ferrules and are mounted in spring reinforced clips

Amp-Trap: UL File E93367; On the 4.8kV an optional hookeye mounted in the factory is available; Ferrule mounting for standard clips and interchangeability with other brands of fuses; The Amp-Trap and 9F60 R-Rated fuses are UL Recognized; Metal embossed catalog number and manufacturing date for lasting identification; Current-limiting for superior equipment protection; On all other 3” barrels if a hookeye is required, use the operating eye 9F61AAW612; Blown-fuse indicator to give positive identification of open fuse; 9F60: UL File E191980

$2,023.03 /EA
NOT CURRENTLY IN STOCK
  • « PREV
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • NEXT »