Browse Categories

Search in Category

Fuses

Filter Your Search

Show Attribute Brand
Hide Attribute Connection
Hide Attribute Connection Type
Hide Attribute Country Of Origin
Hide Attribute Current
Hide Attribute Degree of protection (IP)
Hide Attribute Diameter
Hide Attribute Frequency
Hide Attribute Fuse Size
Hide Attribute Fuse Type
Hide Attribute Height
Hide Attribute Length
Hide Attribute Size
Hide Attribute Type
Hide Attribute Voltage
Hide Attribute Voltage Rating
Hide Attribute Weight
Hide Attribute Width
Hide Attribute Wire Type

Shop by Category

Fuses

Power Products/Fuses 
Viewing Page 193 of 1000 (10,000+ results)
Sort By:
View:
FS EKO-1DD 38KV-3 IN

FS EKO-1DD 38KV-3 IN

Item #: 9F61CJN409

Supplier Part #: 9F61CJN409
Brand: Mersen
9F61 Advisor Page 9F61 Advisor Page
9F61 EKO-1 Outdoor Support Advisor Page 9F61 EKO-1 Outdoor Support Advisor Page
9F61 Instruction Sheet 9F61 Instruction Sheet
9F61 Selection Overview 9F61 Selection Overview
Drawing 9F61CEF209 : PDF (77 KB) Drawing 9F61CEF209 : PDF (77 KB)
Drawing 9F61CEF309 : PDF (77 KB) Drawing 9F61CEF309 : PDF (77 KB)
Drawing 9F61CEF409 : PDF (82 KB) Drawing 9F61CEF409 : PDF (82 KB)
Drawing 9F61CGL209 : PDF (79 KB) Drawing 9F61CGL209 : PDF (79 KB)
Drawing 9F61CGL309 : PDF (78 KB) Drawing 9F61CGL309 : PDF (78 KB)
Drawing 9F61CGL409 : PDF (83 KB) Drawing 9F61CGL409 : PDF (83 KB)
Drawing 9F61CHM209 : PDF (79 KB) Drawing 9F61CHM209 : PDF (79 KB)
Drawing 9F61CHM309 : PDF (101 KB) DXF (631 KB) STP (5.2 MB) Drawing 9F61CHM309 : PDF (101 KB) DXF (631 KB) STP (5.2 MB)
Drawing 9F61CHM409 : PDF (83 KB) Drawing 9F61CHM409 : PDF (83 KB)
Drawing 9F61CJN309 : PDF (80 KB) Drawing 9F61CJN309 : PDF (80 KB)
Drawing 9F61CJN409 : PDF (84 KB) Drawing 9F61CJN409 : PDF (84 KB)
Drawing 9F61CKF009 : PDF (82 KB) Drawing 9F61CKF009 : PDF (82 KB)

Fuse supports, non-disconnecting, are used primarily in potential transformer circuits, or where there is some other disconnecting or isolating device in series with the fuse in the circuit. Disconnecting switch devices have the additional feature of serving to isolate the equipment they protect. It should be noted that disconnecting switches are not load-breaking devices, therefore, the circuit must be open prior to the fuse disconnection. Select either a fuse support or a disconnecting switch for each fuse. Fuse supports and disconnecting switches include live parts for both ends. Both fuse supports and fuse disconnect switches can be mounted vertically or horizontally. The type EK are used for indoor installations while the type EKO are used outdoors.
$5,637.60 /EA
NOT CURRENTLY IN STOCK
FD EKO-3DD 38KV-3

FD EKO-3DD 38KV-3

Item #: 9F61CJN410

Supplier Part #: 9F61CJN410
Brand: Mersen
9F61 Advisor Page 9F61 Advisor Page
9F61 EKO-3 Outdoor Non-Load Disconnect Advisor Page 9F61 EKO-3 Outdoor Non-Load Disconnect Advisor Page
9F61 Instruction Sheet 9F61 Instruction Sheet
9F61 Selection Overview 9F61 Selection Overview
Drawing 9F61CEF210 : PDF (103 KB) Drawing 9F61CEF210 : PDF (103 KB)
Drawing 9F61CEF310 : PDF (98 KB) Drawing 9F61CEF310 : PDF (98 KB)
Drawing 9F61CEF410 : PDF (105 KB) Drawing 9F61CEF410 : PDF (105 KB)
Drawing 9F61CGL210 : PDF (105 KB) Drawing 9F61CGL210 : PDF (105 KB)
Drawing 9F61CGL310 : PDF (100 KB) Drawing 9F61CGL310 : PDF (100 KB)
Drawing 9F61CGL410 : PDF (107 KB) Drawing 9F61CGL410 : PDF (107 KB)
Drawing 9F61CGN210 : PDF (110 KB) Drawing 9F61CGN210 : PDF (110 KB)
Drawing 9F61CHM210 : PDF (105 KB) Drawing 9F61CHM210 : PDF (105 KB)
Drawing 9F61CHM310 : PDF (101 KB) Drawing 9F61CHM310 : PDF (101 KB)
Drawing 9F61CHM410 : PDF (107 KB) Drawing 9F61CHM410 : PDF (107 KB)
Drawing 9F61CJN310 : PDF (104 KB) DXF (1.2 MB) STP (18.7 MB) Drawing 9F61CJN310 : PDF (104 KB) DXF (1.2 MB) STP (18.7 MB)
Drawing 9F61CJN410 : PDF (110 KB) Drawing 9F61CJN410 : PDF (110 KB)

Fuse supports, non-disconnecting, are used primarily in potential transformer circuits, or where there is some other disconnecting or isolating device in series with the fuse in the circuit. Disconnecting switch devices have the additional feature of serving to isolate the equipment they protect. It should be noted that disconnecting switches are not load-breaking devices, therefore, the circuit must be open prior to the fuse disconnection. Select either a fuse support or a disconnecting switch for each fuse. Fuse supports and disconnecting switches include live parts for both ends. Both fuse supports and fuse disconnect switches can be mounted vertically or horizontally. The type EK are used for indoor installations while the type EKO are used outdoors.
$6,050.39 /EA
NOT CURRENTLY IN STOCK
FS EKO-1DDDD 55KV-3IN

FS EKO-1DDDD 55KV-3IN

Item #: 9F61CKF009

Supplier Part #: 9F61CKF009
Brand: Mersen
9F61 Advisor Page 9F61 Advisor Page
9F61 EKO-1 Outdoor Support Advisor Page 9F61 EKO-1 Outdoor Support Advisor Page
9F61 Instruction Sheet 9F61 Instruction Sheet
9F61 Selection Overview 9F61 Selection Overview
Drawing 9F61CEF209 : PDF (77 KB) Drawing 9F61CEF209 : PDF (77 KB)
Drawing 9F61CEF309 : PDF (77 KB) Drawing 9F61CEF309 : PDF (77 KB)
Drawing 9F61CEF409 : PDF (82 KB) Drawing 9F61CEF409 : PDF (82 KB)
Drawing 9F61CGL209 : PDF (79 KB) Drawing 9F61CGL209 : PDF (79 KB)
Drawing 9F61CGL309 : PDF (78 KB) Drawing 9F61CGL309 : PDF (78 KB)
Drawing 9F61CGL409 : PDF (83 KB) Drawing 9F61CGL409 : PDF (83 KB)
Drawing 9F61CHM209 : PDF (79 KB) Drawing 9F61CHM209 : PDF (79 KB)
Drawing 9F61CHM309 : PDF (101 KB) DXF (631 KB) STP (5.2 MB) Drawing 9F61CHM309 : PDF (101 KB) DXF (631 KB) STP (5.2 MB)
Drawing 9F61CHM409 : PDF (83 KB) Drawing 9F61CHM409 : PDF (83 KB)
Drawing 9F61CJN309 : PDF (80 KB) Drawing 9F61CJN309 : PDF (80 KB)
Drawing 9F61CJN409 : PDF (84 KB) Drawing 9F61CJN409 : PDF (84 KB)
Drawing 9F61CKF009 : PDF (82 KB) Drawing 9F61CKF009 : PDF (82 KB)

Fuse supports, non-disconnecting, are used primarily in potential transformer circuits, or where there is some other disconnecting or isolating device in series with the fuse in the circuit. Disconnecting switch devices have the additional feature of serving to isolate the equipment they protect. It should be noted that disconnecting switches are not load-breaking devices, therefore, the circuit must be open prior to the fuse disconnection. Select either a fuse support or a disconnecting switch for each fuse. Fuse supports and disconnecting switches include live parts for both ends. Both fuse supports and fuse disconnect switches can be mounted vertically or horizontally. The type EK are used for indoor installations while the type EKO are used outdoors.
$3,542.50 /EA
NOT CURRENTLY IN STOCK
GP EJO-1 FI 55KV 80A

GP EJO-1 FI 55KV 80A

Item #: 9F62DCB080

Supplier Part #: 9F62DCB080
Brand: Mersen
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/06c28e0f60a90090890fcc72d1fc9d964ad43d91.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/06c28e0f60a90090890fcc72d1fc9d964ad43d91.pdf
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/7220247aacc04123e0b81822bde1a8f105664bf3.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/7220247aacc04123e0b81822bde1a8f105664bf3.pdf

Mersen fuses for the protection of transformers and distribution lines deliver overload and short circuit protection. These current-limiting fuses will melt at current that can be as low as 1.7 times the fuse current ratings up to its maximum interrupting rating. These fuses are designed to withstand the transformer magnetizing inrush current. They have 2" (size C), 3" (size D) and 2x3" (size DD) inch diameter barrels with ferrules and are mounted in spring reinforced clips.

Outdoor usage for the 9F62 and 9F60 type EJO; Amp-Trap CS-3 and 9F62 series are UL listed for compatibility with UL listed equipment; Metal embossed catalog number and manufacturing date for lasting identification; Non-venting for silent operation; Ferrule mounting for standard clips and interchangeability with other brands of fuses; Some UL listed to standard File E143362; Current-limiting for superior equipment protection

$1,180.74 /EA
NOT CURRENTLY IN STOCK
GP EJO-1 FI 55KV 100A

GP EJO-1 FI 55KV 100A

Item #: 9F62DCB100

Supplier Part #: 9F62DCB100
Brand: Mersen
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/06c28e0f60a90090890fcc72d1fc9d964ad43d91.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/06c28e0f60a90090890fcc72d1fc9d964ad43d91.pdf
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/7220247aacc04123e0b81822bde1a8f105664bf3.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/7220247aacc04123e0b81822bde1a8f105664bf3.pdf

Mersen fuses for the protection of transformers and distribution lines deliver overload and short circuit protection. These current-limiting fuses will melt at current that can be as low as 1.7 times the fuse current ratings up to its maximum interrupting rating. These fuses are designed to withstand the transformer magnetizing inrush current. They have 2" (size C), 3" (size D) and 2x3" (size DD) inch diameter barrels with ferrules and are mounted in spring reinforced clips.

Outdoor usage for the 9F62 and 9F60 type EJO; Ferrule mounting for standard clips and interchangeability with other brands of fuses; Current-limiting for superior equipment protection; Amp-Trap CS-3 and 9F62 series are UL listed for compatibility with UL listed equipment; Some UL listed to standard File E143362; Metal embossed catalog number and manufacturing date for lasting identification; Non-venting for silent operation

$1,180.74 /EA
NOT CURRENTLY IN STOCK
GP EJO-1 FI 55KV 125A

GP EJO-1 FI 55KV 125A

Item #: 9F62DCB125

Supplier Part #: 9F62DCB125
Brand: Mersen
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/06c28e0f60a90090890fcc72d1fc9d964ad43d91.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/06c28e0f60a90090890fcc72d1fc9d964ad43d91.pdf
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/7220247aacc04123e0b81822bde1a8f105664bf3.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/7220247aacc04123e0b81822bde1a8f105664bf3.pdf

Mersen fuses for the protection of transformers and distribution lines deliver overload and short circuit protection. These current-limiting fuses will melt at current that can be as low as 1.7 times the fuse current ratings up to its maximum interrupting rating. These fuses are designed to withstand the transformer magnetizing inrush current. They have 2" (size C), 3" (size D) and 2x3" (size DD) inch diameter barrels with ferrules and are mounted in spring reinforced clips.

Amp-Trap CS-3 and 9F62 series are UL listed for compatibility with UL listed equipment; Ferrule mounting for standard clips and interchangeability with other brands of fuses; Metal embossed catalog number and manufacturing date for lasting identification; Outdoor usage for the 9F62 and 9F60 type EJO; Some UL listed to standard File E143362; Non-venting for silent operation; Current-limiting for superior equipment protection

$2,005.83 /EA
NOT CURRENTLY IN STOCK
GP EJO-1 FI 55KV 150A

GP EJO-1 FI 55KV 150A

Item #: 9F62DCB150

Supplier Part #: 9F62DCB150
Brand: Mersen
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/06c28e0f60a90090890fcc72d1fc9d964ad43d91.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/06c28e0f60a90090890fcc72d1fc9d964ad43d91.pdf
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/7220247aacc04123e0b81822bde1a8f105664bf3.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/7220247aacc04123e0b81822bde1a8f105664bf3.pdf

Mersen fuses for the protection of transformers and distribution lines deliver overload and short circuit protection. These current-limiting fuses will melt at current that can be as low as 1.7 times the fuse current ratings up to its maximum interrupting rating. These fuses are designed to withstand the transformer magnetizing inrush current. They have 2" (size C), 3" (size D) and 2x3" (size DD) inch diameter barrels with ferrules and are mounted in spring reinforced clips.

Non-venting for silent operation; Current-limiting for superior equipment protection; Amp-Trap CS-3 and 9F62 series are UL listed for compatibility with UL listed equipment; Metal embossed catalog number and manufacturing date for lasting identification; Some UL listed to standard File E143362; Ferrule mounting for standard clips and interchangeability with other brands of fuses; Outdoor usage for the 9F62 and 9F60 type EJO

$2,005.83 /EA
NOT CURRENTLY IN STOCK
GP EJO-1 FI 55KV 175A

GP EJO-1 FI 55KV 175A

Item #: 9F62DCB175

Supplier Part #: 9F62DCB175
Brand: Mersen
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/06c28e0f60a90090890fcc72d1fc9d964ad43d91.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/06c28e0f60a90090890fcc72d1fc9d964ad43d91.pdf
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/7220247aacc04123e0b81822bde1a8f105664bf3.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/7220247aacc04123e0b81822bde1a8f105664bf3.pdf

Mersen fuses for the protection of transformers and distribution lines deliver overload and short circuit protection. These current-limiting fuses will melt at current that can be as low as 1.7 times the fuse current ratings up to its maximum interrupting rating. These fuses are designed to withstand the transformer magnetizing inrush current. They have 2" (size C), 3" (size D) and 2x3" (size DD) inch diameter barrels with ferrules and are mounted in spring reinforced clips.

Non-venting for silent operation; Current-limiting for superior equipment protection; Metal embossed catalog number and manufacturing date for lasting identification; Outdoor usage for the 9F62 and 9F60 type EJO; Amp-Trap CS-3 and 9F62 series are UL listed for compatibility with UL listed equipment; Some UL listed to standard File E143362; Ferrule mounting for standard clips and interchangeability with other brands of fuses

$2,277.27 /EA
NOT CURRENTLY IN STOCK
GP EJO-1 FI 55KV 200A

GP EJO-1 FI 55KV 200A

Item #: 9F62DCB200

Supplier Part #: 9F62DCB200
Brand: Mersen
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/06c28e0f60a90090890fcc72d1fc9d964ad43d91.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/06c28e0f60a90090890fcc72d1fc9d964ad43d91.pdf
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/7220247aacc04123e0b81822bde1a8f105664bf3.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/7220247aacc04123e0b81822bde1a8f105664bf3.pdf

Mersen fuses for the protection of transformers and distribution lines deliver overload and short circuit protection. These current-limiting fuses will melt at current that can be as low as 1.7 times the fuse current ratings up to its maximum interrupting rating. These fuses are designed to withstand the transformer magnetizing inrush current. They have 2" (size C), 3" (size D) and 2x3" (size DD) inch diameter barrels with ferrules and are mounted in spring reinforced clips.

Amp-Trap CS-3 and 9F62 series are UL listed for compatibility with UL listed equipment; Metal embossed catalog number and manufacturing date for lasting identification; Ferrule mounting for standard clips and interchangeability with other brands of fuses; Some UL listed to standard File E143362; Non-venting for silent operation; Outdoor usage for the 9F62 and 9F60 type EJO; Current-limiting for superior equipment protection

$2,277.27 /EA
NOT CURRENTLY IN STOCK
GP EJO-1 FI 83KV 65A

GP EJO-1 FI 83KV 65A

Item #: 9F62DCC065

Supplier Part #: 9F62DCC065
Brand: Mersen
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/105707d3d1e0ff7a7d022e8bd0d11cd23675f42e.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/105707d3d1e0ff7a7d022e8bd0d11cd23675f42e.pdf
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/e85fa03fde101037722b8f2fe57f3986818d1ec3.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/e85fa03fde101037722b8f2fe57f3986818d1ec3.pdf

Mersen fuses for the protection of transformers and distribution lines deliver overload and short circuit protection. These current-limiting fuses will melt at current that can be as low as 1.7 times the fuse current ratings up to its maximum interrupting rating. These fuses are designed to withstand the transformer magnetizing inrush current. They have 2" (size C), 3" (size D) and 2x3" (size DD) inch diameter barrels with ferrules and are mounted in spring reinforced clips.

Amp-Trap CS-3 and 9F62 series are UL listed for compatibility with UL listed equipment; Outdoor usage for the 9F62 and 9F60 type EJO; Current-limiting for superior equipment protection; Ferrule mounting for standard clips and interchangeability with other brands of fuses; Non-venting for silent operation; Some UL listed to standard File E143362; Metal embossed catalog number and manufacturing date for lasting identification

$1,110.13 /EA
NOT CURRENTLY IN STOCK
  • « PREV
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • NEXT »