Search in Category
Fuses
Search term required.
Filter Your Search
Brand
Connection
Connection Type
Country Of Origin
Current
Degree of protection (IP)
Diameter
No Filtered Results...
Frequency
Fuse Size
No Filtered Results...
Fuse Type
Height
No Filtered Results...
Length
No Filtered Results...
Type
No Filtered Results...
Voltage
No Filtered Results...
Voltage Rating
No Filtered Results...
Weight
No Filtered Results...
Width
No Filtered Results...
Wire Type
Shop by Category
Loading...
Fuses
Viewing Page 223 of 1000
(10,000+ results)
15KV 160 AMPS TYPE 40MV CA
Item #:
A150C160-40
Supplier Part #: A150C160-40
Brand:
Mersen
Mersen capacitor fuses are designed to ANSI C37-41. They are current-limiting operating without noise or discharge and are designed to be used indoors or outdoors in a weatherproof enclosure. These are non-disconnecting fuses requiring the usage of a disconnect switch. These capacitor fuses provide both short circuit and overload protection and are intended to protect against capacitor case rupture or dielectric failure within the capacitor. The various mounting configurations offer manufacturers a wide range of cost and space saving solutions and a large choice of equivalent products to users.
Bus mounting; Clip style mounting; Direct mounting; Blown fuse indicator; Non-venting for silent operation; Current-limiting; ANSI C37-41; High interrupting capacity
$376.67
/EA
NOT CURRENTLY IN STOCK
15KV 175 AMPS TYPE 10MV CA
Item #:
A150C175-10
Supplier Part #: A150C175-10
Brand:
Mersen
Mersen capacitor fuses are designed to ANSI C37-41. They are current-limiting operating without noise or discharge and are designed to be used indoors or outdoors in a weatherproof enclosure. These are non-disconnecting fuses requiring the usage of a disconnect switch. These capacitor fuses provide both short circuit and overload protection and are intended to protect against capacitor case rupture or dielectric failure within the capacitor. The various mounting configurations offer manufacturers a wide range of cost and space saving solutions and a large choice of equivalent products to users.
High interrupting capacity; ANSI C37-41; Clip style mounting; Current-limiting; Bus mounting; Direct mounting; Blown fuse indicator; Non-venting for silent operation
$376.67
/EA
NOT CURRENTLY IN STOCK
15KV 25AMPS TYPE 10 MV CAP
Item #:
A150C25-10
Supplier Part #: A150C25-10
Brand:
Mersen
Mersen capacitor fuses are designed to ANSI C37-41. They are current-limiting operating without noise or discharge and are designed to be used indoors or outdoors in a weatherproof enclosure. These are non-disconnecting fuses requiring the usage of a disconnect switch. These capacitor fuses provide both short circuit and overload protection and are intended to protect against capacitor case rupture or dielectric failure within the capacitor. The various mounting configurations offer manufacturers a wide range of cost and space saving solutions and a large choice of equivalent products to users.
ANSI C37-41; Non-venting for silent operation; Direct mounting; Bus mounting; High interrupting capacity; Current-limiting; Clip style mounting; Blown fuse indicator
$319.87
/EA
NOT CURRENTLY IN STOCK
15KV 25 AMPS TYPE 20 MV CA
Item #:
A150C25-20
Supplier Part #: A150C25-20
Brand:
Mersen
Mersen capacitor fuses are designed to ANSI C37-41. They are current-limiting operating without noise or discharge and are designed to be used indoors or outdoors in a weatherproof enclosure. These are non-disconnecting fuses requiring the usage of a disconnect switch. These capacitor fuses provide both short circuit and overload protection and are intended to protect against capacitor case rupture or dielectric failure within the capacitor. The various mounting configurations offer manufacturers a wide range of cost and space saving solutions and a large choice of equivalent products to users.
High interrupting capacity; Direct mounting; Bus mounting; Current-limiting; Blown fuse indicator; Non-venting for silent operation; ANSI C37-41; Clip style mounting
$319.87
/EA
NOT CURRENTLY IN STOCK
15KV 75 AMPS TYPE 10 MV CA
Item #:
A150C75-10
Supplier Part #: A150C75-10
Brand:
Mersen
Mersen capacitor fuses are designed to ANSI C37-41. They are current-limiting operating without noise or discharge and are designed to be used indoors or outdoors in a weatherproof enclosure. These are non-disconnecting fuses requiring the usage of a disconnect switch. These capacitor fuses provide both short circuit and overload protection and are intended to protect against capacitor case rupture or dielectric failure within the capacitor. The various mounting configurations offer manufacturers a wide range of cost and space saving solutions and a large choice of equivalent products to users.
ANSI C37-41; High interrupting capacity; Current-limiting; Clip style mounting; Direct mounting; Bus mounting; Non-venting for silent operation; Blown fuse indicator
$319.87
/EA
NOT CURRENTLY IN STOCK
15KV 75 AMPS TYPE 20 MV CA
Item #:
A150C75-20
Supplier Part #: A150C75-20
Brand:
Mersen
Mersen capacitor fuses are designed to ANSI C37-41. They are current-limiting operating without noise or discharge and are designed to be used indoors or outdoors in a weatherproof enclosure. These are non-disconnecting fuses requiring the usage of a disconnect switch. These capacitor fuses provide both short circuit and overload protection and are intended to protect against capacitor case rupture or dielectric failure within the capacitor. The various mounting configurations offer manufacturers a wide range of cost and space saving solutions and a large choice of equivalent products to users.
High interrupting capacity; Blown fuse indicator; Clip style mounting; ANSI C37-41; Non-venting for silent operation; Bus mounting; Current-limiting; Direct mounting
$319.87
/EA
NOT CURRENTLY IN STOCK
15KV 75 AMPS TYPE 50 MV CA
Item #:
A150C75-50
Supplier Part #: A150C75-50
Brand:
Mersen
Mersen capacitor fuses are designed to ANSI C37-41. They are current-limiting operating without noise or discharge and are designed to be used indoors or outdoors in a weatherproof enclosure. These are non-disconnecting fuses requiring the usage of a disconnect switch. These capacitor fuses provide both short circuit and overload protection and are intended to protect against capacitor case rupture or dielectric failure within the capacitor. The various mounting configurations offer manufacturers a wide range of cost and space saving solutions and a large choice of equivalent products to users.
Blown fuse indicator; Non-venting for silent operation; Clip style mounting; Bus mounting; Current-limiting; Direct mounting; ANSI C37-41; High interrupting capacity
$319.87
/EA
NOT CURRENTLY IN STOCK
135KV 90 AMPS TYPE 50 MV CA
Item #:
A150C90-50
Supplier Part #: A150C90-50
Brand:
Mersen
Mersen capacitor fuses are designed to ANSI C37-41. They are current-limiting operating without noise or discharge and are designed to be used indoors or outdoors in a weatherproof enclosure. These are non-disconnecting fuses requiring the usage of a disconnect switch. These capacitor fuses provide both short circuit and overload protection and are intended to protect against capacitor case rupture or dielectric failure within the capacitor. The various mounting configurations offer manufacturers a wide range of cost and space saving solutions and a large choice of equivalent products to users.
Non-venting for silent operation; Direct mounting; High interrupting capacity; Clip style mounting; Blown fuse indicator; Current-limiting; Bus mounting; ANSI C37-41
$319.87
/EA
NOT CURRENTLY IN STOCK
94903-FUSEFORM 101
Item #:
A150X1-1
Supplier Part #: A150X1-1
Brand:
Mersen
A150X Amp-Trap® Form 101 Semiconductor Protection fuses, rated up to 1000A, 1500VAC/DC are suitable for traction drive and auxiliary circuits and for high voltage heavy duty rectifier applications. A150X fuses are suitable for use up to 1500VDC on circuits depending on time constant.
DC UL Recognized Component UL File E60314; Mersen self certified 1000 VDC; Heavy duty links; DC UL Recognized 10A-600A@1500VDC L/R<2ms,100kA; 1500VAC/DC rated for wide range of applications; Rugged fiberglass body
$308.75
/EA
NOT CURRENTLY IN STOCK
94144-FUSEFORM 101
Item #:
A150X1000-4TI
Supplier Part #: A150X1000-4TI
Brand:
Mersen
A150X Amp-Trap Form 101 Semiconductor Protection fuses, rated up to 1000A, 1500VAC are suitable for traction drive and auxiliary circuits and for High Voltage Heavy duty rectifier applications. A150X fuses are suitable for use up to 1500VDC on circuits depending on time constant.
1500 Volt DC rated for wide range of circuits; Custom sizes available; Excellent cycling ability
$6,549.68
/EA
NOT CURRENTLY IN STOCK
