Search in Category
Fuses
Search term required.
Filter Your Search
Brand
Connection
Connection Type
Country Of Origin
Current
Degree of protection (IP)
Diameter
No Filtered Results...
Frequency
Fuse Size
No Filtered Results...
Fuse Type
Height
No Filtered Results...
Length
No Filtered Results...
Type
No Filtered Results...
Voltage
No Filtered Results...
Voltage Rating
No Filtered Results...
Weight
No Filtered Results...
Width
No Filtered Results...
Wire Type
Shop by Category
Loading...
Fuses
Viewing Page 325 of 1000
(10,000+ results)
400V CP 10X38 AM 25A S/I FS
Item #:
G217172
Supplier Part #: G217172
Brand:
Mersen
Mersen aM and gG fuse-links cover a wide range of physical sizes and ampere ratings for 400, 500, and 690VAC for protection in electrical distribution circuits and various industrial applications. Most ratings are available in size 8x31 and size 10x38 with an optional indicator, and in size 14x51 and 22x58 with an optional striker to activate an auxiliary contact. Size 10x38 is also available with striker. All cylindrical fuse-links have ceramic bodies and silver-plated contacts. Cylindrical fuse-links "aM" are partial range fuses. They protect electrical devices in case of unacceptable high short-circuit against destruction due high current limiting and low thermal let-through values. They cut off currents more than 6.3xln until the maximum breaking capacity (rated breaking capacity). Cylindrical fuse-links "aM" are mainly used for the protection of installation switch gear in otor circuit currents. For classification of the cylindrical fuse-links the nominal current of the fuse-link can be selected respective to the nominal current of the motor. Our technology and process was designed to ensure highly reliable technical performance.
IEC 60269-1 & -2 (electrically only for the range with striker); Reduced size; Optional indicator; Visual indication of fuse operation; Approved by various shipping organizations; Safest and most reliable protection system
$11.14
/EA
NOT CURRENTLY IN STOCK
BASE NH 0-PP F/TORN 3P
Item #:
G217724
Supplier Part #: G217724
Brand:
Mersen
NH fuse-bases are available for delivery in single-pole and three-pole designs and can be closely mounted in parallel rows. Each three-pole base is upplied with two phase-partition walls. NH fuse-links plugon covers which clip onto the contact springs can also be supplied for these bases. Plastic fuse-bases sizes 00 to 3 have a single-part plastic base while size 4 has a metal baseplate with 2 ceramic bases. The stable silver-plated contact springs are made of electrolytic copper and formed from one piece. Separate springing is provided by highly resilient captive steel springs, making the contact invulnerable to high thermal stress. Size 4 NH fuse-bases are designed for size 4 fuse-links with 8 mm contact blades. A microswitch (250VAC/10A, terminal size 6.3x0.8mm) can be used with NH fuse-links with striker, it operates when fuse melts or where there is no fuse-link. Indirect touch protection fuse bases no microswitch possible. Rated impulse withstand voltage Uimp 6kV / 8kV (sizes 00 / 0-4)
High-pressure spring contacts; DIN VDE 0636-2, 0636-21; IEC 60269 Compliance; Multipolar bases possible by direct linkage in 00 size and with separator accessory in sizes 0, 1, 2 and 3; Dimensions in accordance with DIN 43620; Silver-plated contacts; Polyamide insulating bases; Screw or rail mounting
$504.28
/EA
NOT CURRENTLY IN STOCK
DV-SICHEINSATZ 160A GL-GG
Item #:
G218667
Supplier Part #: G218667
Brand:
Mersen
The D fuse-system is the first generation of screw fuse-system in the german DIN standard. It is still used in many installations. Applications are low voltage ditribution units, where non trained persons are allowed to change the fuse-links. The D fuse range comprises the sizes NDZ, DII, DIII, DIV, DV. The range of applications for D fuse-links is the protection of cables and power lines. They limit and cut-off unacceptable overcurrents and short circuit currents up to their nominal breaking capacity. D fuse-links "gG" also protect equipments and installations against dynamic effects of high short circuit currents.
DIN VDE 0636-301; Low power dissipation; Top and bottom contacts made of nickel plated copper alloy; Optimized size; Insulated body suitable for high mechanical and thermal impacts; Free of lead, cadmium, mercury, chrome 6 (rohs conformity); Resistant to aging; Safe cut-off short circuits and over currents due to special design of fuse element; Clear indication of operation condition due to coloured indicator on top contact
$238.02
/EA
NOT CURRENTLY IN STOCK
ANSCHLUSSKLEMME 35MM2 ISOL
Item #:
G218690
Supplier Part #: G218690
Brand:
Mersen
Fork Design Wiring bars in fork design are ideal for the wiring of modular panel-mounting devices as per DIN 43880 with flat-type, dual-function or single-screw terminals. Additional incoming terminals are required when wiring devices with flat-type or single-screw terminals. In contrast, devices with dual-function terminals allow bar connection to the top section of the terminal with simultaneous incoming supply in the bottom section. The use of end caps on multi-pole wiring bars guarantees optimum shock-hazard protection and prevents arcing at bar ends. Pin Design Wiring bars in pin design are ideal for the wiring of modular panel-mounting devices to DIN 43880 with box terminal, frame terminal or two-scre clamp. The incoming supply to the wiring-bar system is provided over additional incoming terminals.
max. current-carrying capacity through incoming supply at the center; low flammable, self-extinguishing and halogen-free insulating material; high temperature resistant insulating material; wiring bars made of copper SF-Cu
$65.91
/EA
NOT CURRENTLY IN STOCK
BASE NH 0-PP F/RAIL 2P
Item #:
G218759
Supplier Part #: G218759
Brand:
Mersen
NH fuse-bases are available for delivery in single-pole and three-pole designs and can be closely mounted in parallel rows. Each three-pole base is upplied with two phase-partition walls. NH fuse-links plugon covers which clip onto the contact springs can also be supplied for these bases. Plastic fuse-bases sizes 00 to 3 have a single-part plastic base while size 4 has a metal baseplate with 2 ceramic bases. The stable silver-plated contact springs are made of electrolytic copper and formed from one piece. Separate springing is provided by highly resilient captive steel springs, making the contact invulnerable to high thermal stress. Size 4 NH fuse-bases are designed for size 4 fuse-links with 8 mm contact blades. A microswitch (250VAC/10A, terminal size 6.3x0.8mm) can be used with NH fuse-links with striker, it operates when fuse melts or where there is no fuse-link. Indirect touch protection fuse bases no microswitch possible. Rated impulse withstand voltage Uimp 6kV / 8kV (sizes 00 / 0-4)
Screw or rail mounting; Polyamide insulating bases; Dimensions in accordance with DIN 43620; Silver-plated contacts; IEC 60269 Compliance; DIN VDE 0636-2, 0636-21; Multipolar bases possible by direct linkage in 00 size and with separator accessory in sizes 0, 1, 2 and 3; High-pressure spring contacts
$332.83
/EA
NOT CURRENTLY IN STOCK
CC 75 GRC 122 TTF 0350
Item #:
G220898
Supplier Part #: G220898
Brand:
Mersen
Mersen DC offers provide a very high performant protection for railway power and auxiliary circuits. Mersen DC Semiconductor fuse-links were developed to provide improved performance required by today's new DC equipment. These fuse-links are typically operated at more elevated temperature than other fuse type, have lower I²t to minimize damage to protected components on short circuits, lower watts loss and longer life.
Extremely fast acting; Very low I²t; IEC 60269-4 Compliance; Excellent cycling capability; Multiple body sizes and terminals or blades combination; Eliminate all overloads
$3,127.13
/EA
NOT CURRENTLY IN STOCK
6921 CP GRC 2258 25
Item #:
G220921
Supplier Part #: G220921
Brand:
Mersen
Extremely breaking capacity rating fuses: protection of semiconductors in compliance with standard IEC 60269-1 and -4 600-690V voltage rating (current rating 12 to 135A) as per IEC 33 gR class (current rating 12 to 100A) according to VDE 636-23 - Clearing all overloads - Improved safety and protection - Enabling selective coordination among all distribution circuit fuses aR class (current rating 125 and 135A) as per VDE 636-23 and IEC 60269-4 Two models complying with NF C63210 and 63211 with or without trip-indicator gRC fuses are 700VAC-DC UL Recognized
Call
NOT CURRENTLY IN STOCK
CC 66 GRB 123 EF 0800
Item #:
G220944
Supplier Part #: G220944
Brand:
Mersen
Mersen DC offers provide a very high performant protection for railway power and auxiliary circuits. Mersen DC Semiconductor fuse-links were developed to provide improved performance required by today's new DC equipment. These fuse-links are typically operated at more elevated temperature than other fuse type, have lower I²t to minimize damage to protected components on short circuits, lower watts loss and longer life.
Multiple body sizes and terminals or blades combination; Extremely fast acting; Very low I²t; Eliminate all overloads; IEC 60269-4 Compliance; Excellent cycling capability
$8,300.95
/EA
NOT CURRENTLY IN STOCK
69 GRB 17/63
Item #:
G220967
Supplier Part #: G220967
Brand:
Mersen
Extremely high breaking capacity fuses Protection of power semiconductors as per IEC standard 60269-1 and -4 690V voltage rating as per IEC 33 gR class (current ratings 12 to 90A) as per VDE 636-23 - Clearing all overloads - Improved safety and protection - Enabling selective coordination with all fuses within distribution circuit aR class (current ratings 100A) according to VDE 636-23 and IEC 60269-4 Connection as per - German standard DIN 43653/00C - British standard BS88-4 These fuses are UL Recognized
$184.10
/EA
NOT CURRENTLY IN STOCK
69 GRB 17 P 25
Item #:
G220990
Supplier Part #: G220990
Brand:
Mersen
Extremely high breaking capacity fuses Protection of power semiconductors as per IEC standard 60269-1 and -4 690V voltage rating as per IEC 33 gR class (current ratings 12 to 90A) as per VDE 636-23 - Clearing all overloads - Improved safety and protection - Enabling selective coordination with all fuses within distribution circuit aR class (current ratings 100A) according to VDE 636-23 and IEC 60269-4 Connection as per - German standard DIN 43653/00C - British standard BS88-4 These fuses are UL Recognized
$224.28
/EA
NOT CURRENTLY IN STOCK
