Lugs

UR – ANSI/UL 67, ANSI/UL 891; EAC compliant; cUR – CSA C22.2 No. 29, CSA C22.2 No. 244; RoHS; Weight savings and material savings compared to wire alternatives; UL 758 Appliance Wiring Material requirements for Cold Bend testing at -40°C and -50°C (-40°F and -58°F); CSA – CSA C22.2 No. 0, CSA C22.2 No. 210; Traceability codes and designation part numbers printed on insulation; 100% production dielectric tested; Thin layers of tinned electrolytic copper formed into a stack; Dramatically smaller and more flexible than comparable cable based on ampacity; Reduces total installation cost; ABS; Easily bent, folded, and twisted, improving assembly flexibility, shortening connections, and decreasing footprint; Connections made by punching and bolting directly through the copper laminates, clamping onto the end of the nVent ERIFLEX Flexibar, or welding using nVent ERICO Cadweld; Tinned copper allows for copper or aluminum conductor connections; Insulated by high-resistance, self-extinguishing PVC with less than 20% contact with conductor for high flexibility; UR – ANSI/UL 758; Better power density than cable with lower skin effect ratio; No lugs needed, reducing installation time and improving resistance to vibration; RoHS compliant; Bureau Veritas – ACE 14/163/02; CE, ERIFLEX FLEXIBAR – EN 61439-1

CSA – CSA C22.2 No. 0, CSA C22.2 No. 210; Better power density than cable with lower skin effect ratio; Traceability codes and designation part numbers printed on insulation; UL 758 Appliance Wiring Material requirements for Cold Bend testing at -40°C and -50°C (-40°F and -58°F); Reduces total installation cost; UR – ANSI/UL 758; RoHS; No lugs needed, reducing installation time and improving resistance to vibration; Tinned copper allows for copper or aluminum conductor connections; EAC compliant; Dramatically smaller and more flexible than comparable cable based on ampacity; Bureau Veritas – ACE 14/163/02; ABS; CE, ERIFLEX FLEXIBAR – EN 61439-1; UR – ANSI/UL 67, ANSI/UL 891; Thin layers of tinned electrolytic copper formed into a stack; 100% production dielectric tested; cUR – CSA C22.2 No. 29, CSA C22.2 No. 244; Insulated by high-resistance, self-extinguishing PVC with less than 20% contact with conductor for high flexibility; Weight savings and material savings compared to wire alternatives; Easily bent, folded, and twisted, improving assembly flexibility, shortening connections, and decreasing footprint; Connections made by punching and bolting directly through the copper laminates, clamping onto the end of the nVent ERIFLEX Flexibar, or welding using nVent ERICO Cadweld; RoHS compliant