Browse Categories

Search in Category

Other

Filter Your Search

Hide Attribute Cable Length
Hide Attribute Component Type
Hide Attribute Degree of protection (IP)
Hide Attribute Number of analog outputs
Hide Attribute Number of Poles
Hide Attribute Operational Voltage Range
Hide Attribute Output

Shop by Category

Loading...

Other

Other 
Viewing Page 28 of 1000 (10,000+ results)
GFI RJ45 3A 32

GFI RJ45 3A 32

Item #: GF-RJ45-R-32

Supplier Part #: GF-RJ45-R-32
Brand: Mencom

A Panel Interface Connector (PIC) is a device that typically mounts to the outside of a control panel housing a PLC, computer, or other type of programmable device. Once in place, the PIC, which houses convenient pass through connections, allows the user to interface with the computer, PLC, or other devices inside the control panel. These convenient access ports eliminate the need to open the panel door, creating a safer environment on the shop floor, and helping the user adhere to the safety standards set forth by NFPA 70E. With well over 2000 designs, Mencom is sure to have the configuration you need. If we do not, just contact one of our design engineers and we will work with you to create the solution you need.
$225.18 /EA
NOT CURRENTLY IN STOCK
HDSS FUS 3P3W 600V 400A N1 SERIES A

HDSS FUS 3P3W 600V 400A N1 SERIES A

Item #: HF365A

Supplier Part #: US2:HF365A
Brand: Siemens

Siemens Low Voltage Circuit Protection Heavy Duty Safety Switch. 3-Pole 3-Fuse Fused in a type 1 enclosure (indoor). Rated 600VAC (400A).
$11,738.00 /EA
NOT CURRENTLY IN STOCK
Pan Mt LED Light Steady 12-24VAC/DC G

Pan Mt LED Light Steady 12-24VAC/DC G

Item #: PMLST-012-024G

Supplier Part #: PMLST-012-024G
Brand: Federal Signal

Model PMLST allows for a single steady light effect, while model PMLMP offers three different light effects (steady, flashing or simulated strobe) controllable via independent electric contacts. These models offer a self-extinguishing PC body that protects against vibrations, dust and atmospheric elements. The device can be panel mounted through a 1.18" hole and secured with the provided locking ring.

360 degrees light-diffusing design; 50,000 hour LED; Available in steady (PMLST) or multi-pattern (PMLMP); Type 4X, IP66 enclosure; Models available in 12-24VAC/DC or 48-240VAC; UL Listed and cUL Listed; IP69K compliant; PMLMP contains steady, flashing & simulated strobe effects; CE Certified

$57.25 /EA
NOT CURRENTLY IN STOCK
ERIFLEX FLEXIBAR Advanced 2 m Tinned Cop

ERIFLEX FLEXIBAR Advanced 2 m Tinned Cop

Item #: 534042

Supplier Part #: FADV2MTC10X50X1
Brand: nVent Eriflex

Flexible busbar with Advanced Technology design; thin layers of tinned electrolytic copper with high-resistance, halogen free, low smoke and flame retardant insulation. Flexibar Advanced 2 m long 10X50X1 mm.

Connections made by punching and bolting directly through the copper laminates or clamping onto the end of the nVent ERIFLEX Flexibar; IEC 61439-1 Class II – IEC 61439-1 Class II; ERIFLEX UV – IEC 60364-5-52, ISO 4892-2; IEC 60695-2-12 – IEC 60695-2-12; Full range from 19.5 mm² up to 1200 mm² and 125 A to 2800 A; 100% production dielectric tested; ABS; Thin layers of tinned electrolytic copper formed into a stack; Tinned copper allows for copper or aluminum conductor connections; Insulated by high-resistance, halogen free, flame retardant and low smoke material with less than 20% contact with conductor for high flexibility; EAC; Traceability codes and designation part numbers printed on insulation; Dramatically smaller and more flexible than comparable cable based on ampacity; UR – ANSI/UL 758; UR – ANSI/UL 67, ANSI/UL 891; CSA – C22.2 No 210; CSA – CSA C22.2 No. 0, CSA C22.2 No. 210; cUR – CSA C22.2 No. 29, CSA C22.2 No. 244; ISO 5659-2 – ISO 5659-2; CE, ERIFLEX FLEXADV – EN 61439-1; Conforms to NF EN 45545 obtaining an HL3 classification for chapters R22 and R23; Compliant to ISO 6469-1 (Electrically propelled road vehicles – Part 1: Rechargeable energy storage system) – Section 6.2.2 Vibrations; Weight savings and material savings compared to wire alternatives; Better power density than cable with lower skin effect ratio; No lugs needed, reducing installation time and improving resistance to vibration; UL (IEC) – UL 2885 – IEC 60754-1, IEC 60754-2, IEC 62821-1 Annex B, IEC 61034-2; On request, can be manufactured with other colors (typically with Orange sleeve for battery connection); EN 45545-2 – EN 45545-2; RoHS; RoHS compliant; Bureau Veritas – ACE 14/163/02; Reduces total installation cost; UL – UL94-V0; Easily bent, folded, and twisted, improving assembly flexibility, shortening connections, and decreasing footprint; IEC 61439-1 – IEC 61439-1

$683.31 /EA
NOT CURRENTLY IN STOCK
$489.27 /EA
NOT CURRENTLY IN STOCK
$225.00 /EA
NOT CURRENTLY IN STOCK
CABLE SIGNAL PREFAB D-CLIQ 20M

CABLE SIGNAL PREFAB D-CLIQ 20M


Supplier Part #: 6FX2002-1DC00-1CA0
Brand: Siemens

Signal cable, preassembled (SINAMICS drive cliq) connector IP20/IP20, without 24 v length (m) = 0 + 20 + 0 + 0
$318.00 /EA
NOT CURRENTLY IN STOCK

POWER CABLE PREFAB MC500 1.5M


Supplier Part #: 6FX5002-5CN01-1AB5
Brand: Siemens

POWER CABLE PREASSEMBLED TYPE: 6FX50.2-5CN01 4X1.5 C SPEED CONNECT CONNECTOR GR. 1 (SINAMICS MOTOR MODULE) UL/CSA, DESINA MOTION CONNECT 500 DMAX = 11,5 MM LENGTH (M) = + 0 + 0 + 1 + 0,5
$337.00 /EA
NOT CURRENTLY IN STOCK
  • « PREV
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • NEXT »