Flexibar Advanced, 1,600 A, 10 Layers, 3.937" x 0.039", 1,974 kcmil, 6.56' long

Bureau Veritas – ACE 14/163/02; Conforms to NF EN 45545 obtaining an HL3 classification for chapters R22 and R23; RoHS; ABS; Compliant to ISO 6469-1 (Electrically propelled road vehicles – Part 1: Rechargeable energy storage system) – Section 6.2.2 Vibrations; IEC 60695-2-12 – IEC 60695-2-12; RoHS compliant; EN 45545-2 – EN 45545-2; CE, ERIFLEX FLEXADV – EN 61439-1; cUR – CSA C22.2 No. 29, CSA C22.2 No. 244; Traceability codes and designation part numbers printed on insulation; Full range from 19.5 mm² up to 1200 mm² and 125 A to 2800 A; On request, can be manufactured with other colors (typically with Orange sleeve for battery connection); UL – UL94-V0; EAC; No lugs needed, reducing installation time and improving resistance to vibration; ISO 5659-2 – ISO 5659-2; UR – ANSI/UL 67, ANSI/UL 891; Connections made by punching and bolting directly through the copper laminates or clamping onto the end of the nVent ERIFLEX Flexibar; Tinned copper allows for copper or aluminum conductor connections; Better power density than cable with lower skin effect ratio; Dramatically smaller and more flexible than comparable cable based on ampacity; IEC 61439-1 – IEC 61439-1; Thin layers of tinned electrolytic copper formed into a stack; Reduces total installation cost; Easily bent, folded, and twisted, improving assembly flexibility, shortening connections, and decreasing footprint; Insulated by high-resistance, halogen free, flame retardant and low smoke material with less than 20% contact with conductor for high flexibility; 100% production dielectric tested; ERIFLEX UV – IEC 60364-5-52, ISO 4892-2; IEC 61439-1 Class II – IEC 61439-1 Class II; Weight savings and material savings compared to wire alternatives; CSA – C22.2 No 210