Browse Categories
Power Products/Fuses

Fuse Bases 600V 30A Midget 2-pole 11-11 Crimp

MIDGET FH INLINE 2P 11-11
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/376ba1ac128d8490f05b5cbb550787ee45c53e0b.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/376ba1ac128d8490f05b5cbb550787ee45c53e0b.pdf
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/81ada93a9c086494a472a02f12fe1d3283acdb72.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/81ada93a9c086494a472a02f12fe1d3283acdb72.pdf
Item #: FEX-11-11

Product Info

FEX1111
Mersen

Mersen’s complete line of single and dual pole in-line fuse holders accommodate either 1-1/2" x 13/32" (10 x 38 mm) midget or Class CC fuses. The fuse holders are designed for quick installation. Securing nuts or screws are captive thus speeding installation by reducing the need to locate and assemble loose components in the field. Three internal O-rings per pole seal the fuse holder providing a waterresistant compartment for the fuse. The captive O-rings are colored (blue for single pole and red for dual pole) for quick detection. Optional cone shaped insulator boots can be slipped on to provide a watertight seal (breakaway versions come with boots standard). Both single and dual pole versions have an optional breakaway feature which safely disconnects the load in case of a pole knockdown. Fuses remain safely encapsulated within the watertight fuse holder on the load side. Once the pole has been reinstalled the fuse holder can be easily reconnected.

3 O-rings per pole for water tight applications; Environmentally friendly-no lead solder used; High heat, impact resistant insulator; Highly visible catalog number even with insulation boots installed; Accepts midget or Class CC fuses; Breakaway version quickly disconnects line side during pole knockdown in compliance with state and federal highway commission standards; Colored O-rings for quick detection; Time delay for motor starting and transformer inrush; Wire gauge size identified on insulation boots for quick, accurate trimming; Wide assortment of terminal variations; Captive nut or screw for quick installations; Permanently installed neutral versions quickly identified by white nuts; CSA Certified Class CC and Midget Class 6225, File 32169; Tulip fuse clip for improved contact and low losses; UL Listed Class CC Guide IZLT, File E52283; Single and dual poles; Polarized dual pole provides simultaneous disconnection; UL Recognized Component Midget Guide IZLT2, File E52283

Item Specifications

  • 30 A
  • 30 A
  • Polyethylene
  • Mexico
  • 60 Hz
  • 50/60 Hz
  • Clip-in
  • In-Line
  • 30 A
  • 80 °C
  • 80 °C
  • 80 °C
  • -25 °C
  • 2
  • FEX - Midget
  • 600 V
  • 600 V
  • 100 kA
  • 600 V
  • Crimp
$232.11 /EA
NOT CURRENTLY IN STOCK
QTY:

Have Questions?

Ask our experts:
724-741-8200