Search in Category
Fuses
Search term required.
Filter Your Search
Brand
Connection
Connection Type
Country Of Origin
Current
Degree of protection (IP)
Diameter
No Filtered Results...
Frequency
Fuse Size
No Filtered Results...
Fuse Type
Height
No Filtered Results...
Length
No Filtered Results...
Type
No Filtered Results...
Voltage
No Filtered Results...
Voltage Rating
No Filtered Results...
Weight
No Filtered Results...
Width
No Filtered Results...
Wire Type
Shop by Category
Loading...
Fuses
Viewing Page 164 of 1000
(10,000+ results)
BASE NH 3-PP F/TORN 4P
Item #:
L215681
Supplier Part #: L215681
Brand:
Mersen
NH fuse-bases are available for delivery in single-pole and three-pole designs and can be closely mounted in parallel rows. Each three-pole base is upplied with two phase-partition walls. NH fuse-links plugon covers which clip onto the contact springs can also be supplied for these bases. Plastic fuse-bases sizes 00 to 3 have a single-part plastic base while size 4 has a metal baseplate with 2 ceramic bases. The stable silver-plated contact springs are made of electrolytic copper and formed from one piece. Separate springing is provided by highly resilient captive steel springs, making the contact invulnerable to high thermal stress. Size 4 NH fuse-bases are designed for size 4 fuse-links with 8 mm contact blades. A microswitch (250VAC/10A, terminal size 6.3x0.8mm) can be used with NH fuse-links with striker, it operates when fuse melts or where there is no fuse-link. Indirect touch protection fuse bases no microswitch possible. Rated impulse withstand voltage Uimp 6kV / 8kV (sizes 00 / 0-4)
Multipolar bases possible by direct linkage in 00 size and with separator accessory in sizes 0, 1, 2 and 3; Silver-plated contacts; IEC 60269 Compliance; Dimensions in accordance with DIN 43620; High-pressure spring contacts; Polyamide insulating bases; Screw or rail mounting; DIN VDE 0636-2, 0636-21
$1,537.91
/EA
NOT CURRENTLY IN STOCK
BASE SEC CC8 F/TORN 2P
Item #:
L216164
Supplier Part #: L216164
Brand:
Mersen
The innovative and comprehensive range of Mersen fuse-holders. CC fuse-holders are available in 1, 2, 3 poles, in IEC version in a very special compact design. Multi-pole units can also be field assembled by ordering pin-ties assembly kit. CC range is made of tough and durable thermoplastic material.
Very compact design for small space applications; DIN rail mounted sizes 14×51 and 22×58; Panel mounted for all sizes
Call
NOT CURRENTLY IN STOCK
D03-SICHEINSATZ 80A GL-GG
Item #:
L216716
Supplier Part #: L216716
Brand:
Mersen
The D0 fuse-system is installed in low voltage distribution units, where fuse-links are accessible to non trained persons and can also be replaced by them. The system is the most modern of the screw systems and designed for 400VAC/250VDC networks. The D0 fuse range comprises the standardized fuse sizes D01, D02 and D03. The range of applications for D0 fuse-links for general application is the protection of cables and power lines. They limit and cut off unacceptable overcurrents and short circuit currents up to their nominal breaking capacity. D0 fuse-links "gG" also protect equipments and installations against dynamic effects of high short circuit currents.
DIN VDE 0636-3; Insulated body suitable for high mechanical and thermal impacts; Low power dissipation; Clear indication of operation condition due to coloured indicator un top contact; Optimized size; Top and bottom contacts made of nickel plated or silver plated copper alloy; Safe cut-off short circuits and over currents due to special design of fuse element; Resistant to aging
$186.16
/EA
NOT CURRENTLY IN STOCK
SCHRAUBKAPPE MIT PROFLOCH DII
Item #:
L217130
Supplier Part #: L217130
Brand:
Mersen
The D fuse-system is the first generation of the screw fuse-system in the german DIN standard. It is still used in many installations. Applications are low voltage ditribution units, where non trained persons are allowed to change the fuse-links. The D fuse-range comprises the sizes NDZ, DII, DIII, DIV, DV. The range of applications for D fuse-links gG is the protection of cables and power lines. They limit and cut off unacceptable overcurrents and short circuit currents up to their nominal breaking capacity. D fuse-links gG also protect equipments and installations against dynamic effects of high short circuit currents.
Optimized size; Top and bottom contacts made of nickel plated copper alloy; Insulated body suitable for high mechanical and thermal impacts; Safe cut off short circuits and over currents due to special design of fuse element; Resistant to aging; Clear indication of operation condition due to coloured indicator on top contact; Low power dissipation; Free of lead, cadmium, mercury, chrome 6 (rohs conformity)
$23.52
/EA
NOT CURRENTLY IN STOCK
500V CP 14X51 GG 12A P FS
Item #:
L217176
Supplier Part #: L217176
Brand:
Mersen
Mersen aM and gG fuse-links cover a wide range of physical sizes and ampere ratings for 400, 500, and 690VAC for protection in electrical distribution circuits and various industrial applications. Most ratings are available in size 8x31 and size 10x38 with an optional indicator, and in size 14x51 and 22x58 with an optional striker to activate an auxiliary contact. Size 10x38 is also available with striker. All cylindrical fuse-links have ceramic bodies and silver-plated contacts. Cylindrical fuse-links "gG" are used for the protection of cables, motors and LV-networks. They limit and cut off unacceptable overcurrents and short-circuit currents up to their nominal breaking capacity. Cylindrical fuse-links "gG" also protect electrical equipment and installations against the dynamic effect of high short-currents. Our technology and process was designed to ensure highly reliable technical performance.
Full range protection; Safest and most reliable protection system; Reduced size; IEC 60269-1 & -2; Striker version available for remote indication of fuse operation; Approved by Lloyd’s Register of Shipping and Bureau Veritas
$23.76
/EA
NOT CURRENTLY IN STOCK
NH 2 200A 400V GG
Item #:
L223731
Supplier Part #: L223731
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "gG" NH fuse-links are full range breaking capacity fuse-links and are used to protect cables and equipment. They can interrupt any current surge, from the lowest fusing current up to their breaking capacity, and so can be used alone as protection. They also protect electrical devices and industrial set-ups from the electrodynamic effects of very high short-circuit currents. Rated Power Dissipation values of Mersen NH fuse-links 400VAC are below the maximum values required by standard IEC 60269.
0% cadmium; Double indicator; IEC 60269-1 and -2; Non-isolated gripping lugs; Dimensions according to DIN 43 620 Parts 1 to 4; VDE 0636 Part 201; Lead free contact blades
$282.83
/EA
NOT CURRENTLY IN STOCK
NH 3 400A 400V GG
Item #:
L223754
Supplier Part #: L223754
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "gG" NH fuse-links are full range breaking capacity fuse-links and are used to protect cables and equipment. They can interrupt any current surge, from the lowest fusing current up to their breaking capacity, and so can be used alone as protection. They also protect electrical devices and industrial set-ups from the electrodynamic effects of very high short-circuit currents. Rated Power Dissipation values of Mersen NH fuse-links 400VAC are below the maximum values required by standard IEC 60269.
Lead free contact blades; Isolated metal gripping lugs (SGL); IEC 60269-1 and -2; Dimensions according to DIN 43 620 Parts 1 to 4; VDE 0636 Part 201; 0% cadmium; Double indicator
$436.58
/EA
NOT CURRENTLY IN STOCK
NH 3 500A 690V AM
Item #:
L227986
Supplier Part #: L227986
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "aM" NH fuse-links are partial-range breaking capacity fuse-links, used to protect motor circuits as they are strongly current-limiting and have low power losses. They interrupt currents from 6.3 times In up to their maximum breaking capacity and are therefore suited for short-circuit protection only. They must be associated with other switchgear for protection against overloads. These fuse-links can have a rated current equal to the motor's nominal current.
IEC 60269-1 and -2; Lead free contact blades; Double indicator; VDE 0636 Part 201; Dimensions according to DIN 43 620 parts 1 to 4; 0% cadmium; Non-isolated gripping lugs
$438.74
/EA
NOT CURRENTLY IN STOCK
NH 000 20A 690V GG
Item #:
L228446
Supplier Part #: L228446
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "gG" NH fuse-links are full range breaking capacity fuse-links and are used to protect cables and equipment. They can interrupt any current surge, from the lowest fusing current up to their breaking capacity, and so can be used alone as protection. They also protect electrical devices and industrial set-ups from the electrodynamic effects of very high short-circuit currents.
Non-isolated gripping lugs; Lead free contact blades; 0% cadmium; Double indicator; IEC 60269-1 and -2; VDE 0636 Part 201; Dimensions according to DIN 43 620 parts 1 to 4
$123.49
/EA
NOT CURRENTLY IN STOCK
NH 0 40A 690V GG
Item #:
L228469
Supplier Part #: L228469
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "gG" NH fuse-links are full range breaking capacity fuse-links and are used to protect cables and equipment. They can interrupt any current surge, from the lowest fusing current up to their breaking capacity, and so can be used alone as protection. They also protect electrical devices and industrial set-ups from the electrodynamic effects of very high short-circuit currents.
Dimensions according to DIN 43 620 parts 1 to 4; VDE 0636 Part 201; Lead free contact blades; 0% cadmium; Non-isolated gripping lugs; IEC 60269-1 and -2; Double indicator
$156.37
/EA
NOT CURRENTLY IN STOCK
