Search in Category
Fuses
Search term required.
Filter Your Search
Brand
Connection
Connection Type
Country Of Origin
Current
Degree of protection (IP)
Diameter
No Filtered Results...
Frequency
Fuse Size
No Filtered Results...
Fuse Type
Height
No Filtered Results...
Length
No Filtered Results...
Type
No Filtered Results...
Voltage
No Filtered Results...
Voltage Rating
No Filtered Results...
Weight
No Filtered Results...
Width
No Filtered Results...
Wire Type
Shop by Category
Loading...
Fuses
Viewing Page 253 of 1000
(10,000+ results)
400V SA 4 A 632
Item #:
R098248
Supplier Part #: R098248
Brand:
Mersen
Miniature fuse-links 6x32 SA Medium time lag 400V
$54.37
/EA
NOT CURRENTLY IN STOCK
CC6621 CP GRB 2760 4
Item #:
R098593
Supplier Part #: R098593
Brand:
Mersen
Mersen DC offers provide a very high performant protection for railway power and auxiliary circuits. Mersen DC Semiconductor fuse-links were developed to provide improved performance required by today's new DC equipment. These fuse-links are typically operated at more elevated temperature than other fuse type, have lower I²t to minimize damage to protected components on short circuits, lower watts loss and longer life.
$834.09
/EA
NOT CURRENTLY IN STOCK
30-100A R FUSE REDUCER PR
Item #:
R132
Supplier Part #: R132
Brand:
Mersen
Mersen fuse reducers allow the use of lower rated fuses in existing equipment having clips with higher ampere ratings. The use of closer rated time-delay fuses can improve circuit protection. For example, renewable or one-time fuses feeding a motor can be replaced with fuses sized closer to the motor nameplate current. Non-rejection reducers will allow Class H, K or R fuses to fit Class H or K clips. Rejection-type reducers will allow only Class R fuses to fit Class R clips or only Class J fuses to fit Class J clips. Class J fuse reducers are not for bolt on applications.
$51.36
/EA
NOT CURRENTLY IN STOCK
75238 FUSE REDUCER
Item #:
R162
Supplier Part #: R162
Brand:
Mersen
Mersen fuse reducers allow the use of lower rated fuses in existing equipment having clips with higher ampere ratings. The use of closer rated time-delay fuses can improve circuit protection. For example, renewable or one-time fuses feeding a motor can be replaced with fuses sized closer to the motor nameplate current. Non-rejection reducers will allow Class H, K or R fuses to fit Class H or K clips. Rejection-type reducers will allow only Class R fuses to fit Class R clips or only Class J fuses to fit Class J clips. Class J fuse reducers are not for bolt on applications.
$32.17
/EA
NOT CURRENTLY IN STOCK
60-100A R FUSE REDUCER PR
Item #:
R166
Supplier Part #: R166
Brand:
Mersen
Mersen fuse reducers allow the use of lower rated fuses in existing equipment having clips with higher ampere ratings. The use of closer rated time-delay fuses can improve circuit protection. For example, renewable or one-time fuses feeding a motor can be replaced with fuses sized closer to the motor nameplate current. Non-rejection reducers will allow Class H, K or R fuses to fit Class H or K clips. Rejection-type reducers will allow only Class R fuses to fit Class R clips or only Class J fuses to fit Class J clips. Class J fuse reducers are not for bolt on applications.
$54.89
/EA
NOT CURRENTLY IN STOCK
D02-RECTIEINSATZ 25A 440V GR
Item #:
R200713
Supplier Part #: R200713
Brand:
Mersen
The D0 fuse-system is the most modern of the screw systems in the German DIN standard. This system comprises the sizes D01, D02 and D03. Those D0 ultra-fast acting “gR” ranges are dedicated to semi-conductor protection, in applications where fuse-links are accessible to non-trained persons and can also be changed by them. They are used for the protection of components such as diodes, thyristors or AC/DC motor drives. The “R” stands for the English word Rectifier. D0 fuse-links are available at the rated current range from 2A up to 100A.
Resistant to aging; Safe cut off short circuits and over currents due special design of fuse element; Optimized size; IEC 60 269-4; Top and bottom contacts made of nickel-plated/silver-plated copper alloy; Low power dissipation; DIN VDE 0636-3; DIN EN 60269-4 (VDE 0636-4); Insulated body suitable for high mechanical and thermal impacts; Clear indication of operation condition due coloured indicator on top contact
$82.00
/EA
NOT CURRENTLY IN STOCK
NH 1 32A 500V GG SGL
Item #:
R200805
Supplier Part #: R200805
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "gG" NH fuse-links are full range breaking capacity fuse-links and are used to protect cables and equipment. They can interrupt any current surge, from the lowest fusing current up to their breaking capacity, and so can be used alone as protection. They also protect electrical devices and industrial set-ups from the electrodynamic effects of very high short-circuit currents.
0% cadmium; Lead free contact blades; Dimensions according to DIN 43 620 Parts 1 to 4; VDE 0636 Part 201; Isolated metal gripping lugs (SGL); IEC 60269-1 and -2; Double indicator
$199.19
/EA
NOT CURRENTLY IN STOCK
690V CP 22X58 AM 12A P FS
Item #:
R201311
Supplier Part #: R201311
Brand:
Mersen
Mersen aM and gG fuse-links cover a wide range of physical sizes and ampere ratings for 400, 500, and 690VAC for protection in electrical distribution circuits and various industrial applications. Most ratings are available in size 8x31 and size 10x38 with an optional indicator, and in size 14x51 and 22x58 with an optional striker to activate an auxiliary contact. Size 10x38 is also available with striker. All cylindrical fuse-links have ceramic bodies and silver-plated contacts. Cylindrical fuse-links "aM" are partial range fuses. They protect electrical devices in case of unacceptable high short-circuit against destruction due high current limiting and low thermal let-through values. They cut off currents more than 6.3xln until the maximum breaking capacity (rated breaking capacity). Cylindrical fuse-links "aM" are mainly used for the protection of installation switch gear in otor circuit currents. For classification of the cylindrical fuse-links the nominal current of the fuse-link can be selected respective to the nominal current of the motor. Our technology and process was designed to ensure highly reliable technical performance.
Approved by Lloyd’s Register of Shipping and Bureau Veritas; Striker version available for remote indication of fuse operation; Safest and most reliable protection system; Reduced size; IEC 60269-1 & -2
$53.32
/EA
NOT CURRENTLY IN STOCK
D02-RECTIEINSATZ 50A 440V GR
Item #:
R201771
Supplier Part #: R201771
Brand:
Mersen
The D0 fuse-system is the most modern of the screw systems in the German DIN standard. This system comprises the sizes D01, D02 and D03. Those D0 ultra-fast acting “gR” ranges are dedicated to semi-conductor protection, in applications where fuse-links are accessible to non-trained persons and can also be changed by them. They are used for the protection of components such as diodes, thyristors or AC/DC motor drives. The “R” stands for the English word Rectifier. D0 fuse-links are available at the rated current range from 2A up to 100A.
DIN EN 60269-4 (VDE 0636-4); Optimized size; Resistant to aging; Insulated body suitable for high mechanical and thermal impacts; DIN VDE 0636-3; IEC 60 269-4; Top and bottom contacts made of nickel-plated/silver-plated copper alloy; Safe cut off short circuits and over currents due special design of fuse element; Clear indication of operation condition due coloured indicator on top contact; Low power dissipation
$66.83
/EA
NOT CURRENTLY IN STOCK
500V CP 14X51 AM 12A P FS
Item #:
R201817
Supplier Part #: R201817
Brand:
Mersen
Mersen aM and gG fuse-links cover a wide range of physical sizes and ampere ratings for 400, 500, and 690VAC for protection in electrical distribution circuits and various industrial applications. Most ratings are available in size 8x31 and size 10x38 with an optional indicator, and in size 14x51 and 22x58 with an optional striker to activate an auxiliary contact. Size 10x38 is also available with striker. All cylindrical fuse-links have ceramic bodies and silver-plated contacts. Cylindrical fuse-links "aM" are partial range fuses. They protect electrical devices in case of unacceptable high short-circuit against destruction due high current limiting and low thermal let-through values. They cut off currents more than 6.3xln until the maximum breaking capacity (rated breaking capacity). Cylindrical fuse-links "aM" are mainly used for the protection of installation switch gear in otor circuit currents. For classification of the cylindrical fuse-links the nominal current of the fuse-link can be selected respective to the nominal current of the motor. Our technology and process was designed to ensure highly reliable technical performance.
Reduced size; Approved by Lloyd’s Register of Shipping and Bureau Veritas; Striker version available for remote indication of fuse operation; IEC 60269-1 & -2; Safest and most reliable protection system
$26.27
/EA
NOT CURRENTLY IN STOCK
