Search in Category
Fuses
Search term required.
Filter Your Search
Brand
Connection
Connection Type
Country Of Origin
Current
Degree of protection (IP)
Diameter
No Filtered Results...
Frequency
Fuse Size
No Filtered Results...
Fuse Type
Height
No Filtered Results...
Length
No Filtered Results...
Type
No Filtered Results...
Voltage
No Filtered Results...
Voltage Rating
No Filtered Results...
Weight
No Filtered Results...
Width
No Filtered Results...
Wire Type
Shop by Category
Loading...
Fuses
Viewing Page 248 of 1000
(10,000+ results)
BASE NH 1-PP IP20 F/RAIL 3P
Item #:
Q226725
Supplier Part #: Q226725
Brand:
Mersen
NH fuse-bases are available for delivery in single-pole and three-pole designs and can be closely mounted in parallel rows. Each three-pole base is upplied with two phase-partition walls. NH fuse-links plugon covers which clip onto the contact springs can also be supplied for these bases. Plastic fuse-bases sizes 00 to 3 have a single-part plastic base while size 4 has a metal baseplate with 2 ceramic bases. The stable silver-plated contact springs are made of electrolytic copper and formed from one piece. Separate springing is provided by highly resilient captive steel springs, making the contact invulnerable to high thermal stress. Size 4 NH fuse-bases are designed for size 4 fuse-links with 8 mm contact blades. A microswitch (250VAC/10A, terminal size 6.3x0.8mm) can be used with NH fuse-links with striker, it operates when fuse melts or where there is no fuse-link. Indirect touch protection fuse bases no microswitch possible. Rated impulse withstand voltage Uimp 6kV / 8kV (sizes 00 / 0-4)
Polyamide insulating bases; Silver-plated contacts; IEC 60269 Compliance; Screw or rail mounting; High-pressure spring contacts; DIN VDE 0636-2, 0636-21; Multipolar bases possible by direct linkage in 00 size and with separator accessory in sizes 0, 1, 2 and 3; Dimensions in accordance with DIN 43620
$1,246.46
/EA
NOT CURRENTLY IN STOCK
NH 000 4A 690V AM
Item #:
Q227852
Supplier Part #: Q227852
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "aM" NH fuse-links are partial-range breaking capacity fuse-links, used to protect motor circuits as they are strongly current-limiting and have low power losses. They interrupt currents from 6.3 times In up to their maximum breaking capacity and are therefore suited for short-circuit protection only. They must be associated with other switchgear for protection against overloads. These fuse-links can have a rated current equal to the motor's nominal current.
VDE 0636 Part 201; 0% cadmium; Non-isolated gripping lugs; Double indicator; IEC 60269-1 and -2; Lead free contact blades; Dimensions according to DIN 43 620 parts 1 to 4
$123.54
/EA
NOT CURRENTLY IN STOCK
NH 0 32A 690V AM
Item #:
Q227875
Supplier Part #: Q227875
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "aM" NH fuse-links are partial-range breaking capacity fuse-links, used to protect motor circuits as they are strongly current-limiting and have low power losses. They interrupt currents from 6.3 times In up to their maximum breaking capacity and are therefore suited for short-circuit protection only. They must be associated with other switchgear for protection against overloads. These fuse-links can have a rated current equal to the motor's nominal current.
VDE 0636 Part 201; 0% cadmium; IEC 60269-1 and -2; Lead free contact blades; Non-isolated gripping lugs; Double indicator; Dimensions according to DIN 43 620 parts 1 to 4
$152.83
/EA
NOT CURRENTLY IN STOCK
NH 1 224A 690V AM
Item #:
Q227898
Supplier Part #: Q227898
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "aM" NH fuse-links are partial-range breaking capacity fuse-links, used to protect motor circuits as they are strongly current-limiting and have low power losses. They interrupt currents from 6.3 times In up to their maximum breaking capacity and are therefore suited for short-circuit protection only. They must be associated with other switchgear for protection against overloads. These fuse-links can have a rated current equal to the motor's nominal current.
IEC 60269-1 and -2; Dimensions according to DIN 43 620 parts 1 to 4; VDE 0636 Part 201; Lead free contact blades; Non-isolated gripping lugs; 0% cadmium; Double indicator
$277.24
/EA
NOT CURRENTLY IN STOCK
NH 2 80A 690V AM
Item #:
Q227967
Supplier Part #: Q227967
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "aM" NH fuse-links are partial-range breaking capacity fuse-links, used to protect motor circuits as they are strongly current-limiting and have low power losses. They interrupt currents from 6.3 times In up to their maximum breaking capacity and are therefore suited for short-circuit protection only. They must be associated with other switchgear for protection against overloads. These fuse-links can have a rated current equal to the motor's nominal current.
Non-isolated gripping lugs; IEC 60269-1 and -2; VDE 0636 Part 201; Dimensions according to DIN 43 620 parts 1 to 4; Lead free contact blades; 0% cadmium; Double indicator
$256.68
/EA
NOT CURRENTLY IN STOCK
NH 000 40A 690V GG
Item #:
Q228450
Supplier Part #: Q228450
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "gG" NH fuse-links are full range breaking capacity fuse-links and are used to protect cables and equipment. They can interrupt any current surge, from the lowest fusing current up to their breaking capacity, and so can be used alone as protection. They also protect electrical devices and industrial set-ups from the electrodynamic effects of very high short-circuit currents.
Non-isolated gripping lugs; Lead free contact blades; Dimensions according to DIN 43 620 parts 1 to 4; 0% cadmium; IEC 60269-1 and -2; Double indicator; VDE 0636 Part 201
$118.62
/EA
NOT CURRENTLY IN STOCK
NH 0 100A 690V GG
Item #:
Q228473
Supplier Part #: Q228473
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "gG" NH fuse-links are full range breaking capacity fuse-links and are used to protect cables and equipment. They can interrupt any current surge, from the lowest fusing current up to their breaking capacity, and so can be used alone as protection. They also protect electrical devices and industrial set-ups from the electrodynamic effects of very high short-circuit currents.
IEC 60269-1 and -2; Non-isolated gripping lugs; 0% cadmium; Dimensions according to DIN 43 620 parts 1 to 4; Lead free contact blades; VDE 0636 Part 201; Double indicator
$156.37
/EA
NOT CURRENTLY IN STOCK
NH 2 125A 690V GG
Item #:
Q228496
Supplier Part #: Q228496
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "gG" NH fuse-links are full range breaking capacity fuse-links and are used to protect cables and equipment. They can interrupt any current surge, from the lowest fusing current up to their breaking capacity, and so can be used alone as protection. They also protect electrical devices and industrial set-ups from the electrodynamic effects of very high short-circuit currents.
Dimensions according to DIN 43 620 parts 1 to 4; 0% cadmium; IEC 60269-1 and -2; Non-isolated gripping lugs; Double indicator; VDE 0636 Part 201; Lead free contact blades
$256.68
/EA
NOT CURRENTLY IN STOCK
NH 1 315A 500V GG
Item #:
Q228519
Supplier Part #: Q228519
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "gG" NH fuse-links are full range breaking capacity fuse-links and are used to protect cables and equipment. They can interrupt any current surge, from the lowest fusing current up to their breaking capacity, and so can be used alone as protection. They also protect electrical devices and industrial set-ups from the electrodynamic effects of very high short-circuit currents.
Non-isolated gripping lugs; VDE 0636 Part 201; 0% cadmium; Double indicator; Dimensions according to DIN 43 620 parts 1 to 4; IEC 60269-1 and -2; Lead free contact blades
$197.85
/EA
NOT CURRENTLY IN STOCK
NH 000 50A 690V GG SGL
Item #:
Q229715
Supplier Part #: Q229715
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "gG" NH fuse-links are full range breaking capacity fuse-links and are used to protect cables and equipment. They can interrupt any current surge, from the lowest fusing current up to their breaking capacity, and so can be used alone as protection. They also protect electrical devices and industrial set-ups from the electrodynamic effects of very high short-circuit currents.
IEC 60269-1 and -2; Dimensions according to DIN 43 620 Parts 1 to 4; Double indicator; 0% cadmium; VDE 0636 Part 201; Lead free contact blades; Isolated metal gripping lugs (SGL)
$135.70
/EA
NOT CURRENTLY IN STOCK
