Search in Category
Fuses
Search term required.
Filter Your Search
Brand
Connection
Connection Type
Country Of Origin
Current
Degree of protection (IP)
Diameter
No Filtered Results...
Frequency
Fuse Size
No Filtered Results...
Fuse Type
Height
No Filtered Results...
Length
No Filtered Results...
Type
No Filtered Results...
Voltage
No Filtered Results...
Voltage Rating
No Filtered Results...
Weight
No Filtered Results...
Width
No Filtered Results...
Wire Type
Shop by Category
Loading...
Fuses
Viewing Page 246 of 1000
(10,000+ results)
BASE NH 0-EP F/TORN 4P
Item #:
Q216191
Supplier Part #: Q216191
Brand:
Mersen
NH fuse-bases are available for delivery in single-pole and three-pole designs and can be closely mounted in parallel rows. Each three-pole base is upplied with two phase-partition walls. NH fuse-links plugon covers which clip onto the contact springs can also be supplied for these bases. Plastic fuse-bases sizes 00 to 3 have a single-part plastic base while size 4 has a metal baseplate with 2 ceramic bases. The stable silver-plated contact springs are made of electrolytic copper and formed from one piece. Separate springing is provided by highly resilient captive steel springs, making the contact invulnerable to high thermal stress. Size 4 NH fuse-bases are designed for size 4 fuse-links with 8 mm contact blades. A microswitch (250VAC/10A, terminal size 6.3x0.8mm) can be used with NH fuse-links with striker, it operates when fuse melts or where there is no fuse-link. Indirect touch protection fuse bases no microswitch possible. Rated impulse withstand voltage Uimp 6kV / 8kV (sizes 00 / 0-4)
IEC 60269 Compliance; DIN VDE 0636-2, 0636-21; Polyamide insulating bases; Multipolar bases possible by direct linkage in 00 size and with separator accessory in sizes 0, 1, 2 and 3; High-pressure spring contacts; Dimensions in accordance with DIN 43620; Screw or rail mounting; Silver-plated contacts
$572.79
/EA
NOT CURRENTLY IN STOCK
690V CP 22X58 GG 80A S/I FS
Item #:
Q217180
Supplier Part #: Q217180
Brand:
Mersen
Mersen aM and gG fuse-links cover a wide range of physical sizes and ampere ratings for 400, 500, and 690VAC for protection in electrical distribution circuits and various industrial applications. Most ratings are available in size 8x31 and size 10x38 with an optional indicator, and in size 14x51 and 22x58 with an optional striker to activate an auxiliary contact. Size 10x38 is also available with striker. All cylindrical fuse-links have ceramic bodies and silver-plated contacts. Cylindrical fuse-links "gG" are used for the protection of cables, motors and LV-networks. They limit and cut off unacceptable overcurrents and short-circuit currents up to their nominal breaking capacity. Cylindrical fuse-links "gG" also protect electrical equipment and installations against the dynamic effect of high short-currents. Our technology and process was designed to ensure highly reliable technical performance.
IEC 60269-1 & -2; Reduced size; Striker version available for remote indication of fuse operation; Safest and most reliable protection system; Approved by Lloyd’s Register of Shipping and Bureau Veritas; Full range protection
$31.50
/EA
NOT CURRENTLY IN STOCK
NH 2 200A 500V GG SGL
Item #:
Q217226
Supplier Part #: Q217226
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "gG" NH fuse-links are full range breaking capacity fuse-links and are used to protect cables and equipment. They can interrupt any current surge, from the lowest fusing current up to their breaking capacity, and so can be used alone as protection. They also protect electrical devices and industrial set-ups from the electrodynamic effects of very high short-circuit currents.
0% cadmium; Dimensions according to DIN 43 620 Parts 1 to 4; Isolated metal gripping lugs (SGL); Lead free contact blades; IEC 60269-1 and -2; VDE 0636 Part 201; Double indicator
$268.32
/EA
NOT CURRENTLY IN STOCK
DIII-SEINSATZ 50A 500V GR
Item #:
Q217640
Supplier Part #: Q217640
Brand:
Mersen
The D fuse-system is the first generation of screw fuse-systems in the German DIN standard. It is still used in many installations. This D system comprises the sizes DII, DIII, DIV, DV. Those D ultra-fast acting “gR” ranges are dedicated to semi-conductor protection, in applications where fuse-links are accessible to non-trained persons and can also be changed by them. They are used for the protection of components such as diodes, thyristors or AC/DC motor drives. The “R” stands for the English word Rectifier. D fuse-links are available at the rated current range from 2A up to 200A.
Low power dissipation; IEC 60 269-4; Optimized size; DIN EN 60269-4 (VDE 0636-4); Insulated body suitable for high mechanical and thermal impacts; Resistant to aging; DIN VDE 0636-3; Safe cut off short circuits and over currents due special design of fuse element; Top and bottom contacts made of nickel-plated/silver-plated copper alloy; Clear indication of operation condition due coloured indicator on top contact
$43.16
/EA
NOT CURRENTLY IN STOCK
690V CP 14X51 AM 16A S/I FS
Item #:
Q217686
Supplier Part #: Q217686
Brand:
Mersen
Mersen aM and gG fuse-links cover a wide range of physical sizes and ampere ratings for 400, 500, and 690VAC for protection in electrical distribution circuits and various industrial applications. Most ratings are available in size 8x31 and size 10x38 with an optional indicator, and in size 14x51 and 22x58 with an optional striker to activate an auxiliary contact. Size 10x38 is also available with striker. All cylindrical fuse-links have ceramic bodies and silver-plated contacts. Cylindrical fuse-links "aM" are partial range fuses. They protect electrical devices in case of unacceptable high short-circuit against destruction due high current limiting and low thermal let-through values. They cut off currents more than 6.3xln until the maximum breaking capacity (rated breaking capacity). Cylindrical fuse-links "aM" are mainly used for the protection of installation switch gear in otor circuit currents. For classification of the cylindrical fuse-links the nominal current of the fuse-link can be selected respective to the nominal current of the motor. Our technology and process was designed to ensure highly reliable technical performance.
Striker version available for remote indication of fuse operation; IEC 60269-1 & -2; Safest and most reliable protection system; Reduced size; Approved by Lloyd’s Register of Shipping and Bureau Veritas
$19.40
/EA
NOT CURRENTLY IN STOCK
NH 1 125A 500V GG
Item #:
Q217732
Supplier Part #: Q217732
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of: fuse-base (possibly including terminal covers and phase barriers) fuse-link with blade contact fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type gG NH fuse-links are full range breaking capacity fuse-links and are used to protect cables and equipment. They can interrupt any current surge, from the lowest fusing current up to their breaking capacity, and so can be used alone as protection. They also protect electrical devices and industrial set-ups from the electrodynamic effects of very high short-circuit currents.
Double indicator; Dimensions according to DIN 43 620 parts 1 to 4; 0% cadmium; Non-isolated gripping lugs; Lead free contact blades
$182.93
/EA
NOT CURRENTLY IN STOCK
NH 2 160A 500V GG SGL
Item #:
Q218767
Supplier Part #: Q218767
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "gG" NH fuse-links are full range breaking capacity fuse-links and are used to protect cables and equipment. They can interrupt any current surge, from the lowest fusing current up to their breaking capacity, and so can be used alone as protection. They also protect electrical devices and industrial set-ups from the electrodynamic effects of very high short-circuit currents.
Lead free contact blades; Dimensions according to DIN 43 620 parts 1 to 4; Non-isolated gripping lugs; Double indicator; IEC 60269-1 and -2; VDE 0636 Part 201; 0% cadmium
$248.98
/EA
NOT CURRENTLY IN STOCK
400V CP 8X31 GG 2A S/I FS
Item #:
Q219227
Supplier Part #: Q219227
Brand:
Mersen
Mersen aM and gG fuse-links cover a wide range of physical sizes and ampere ratings for 400, 500, and 690VAC for protection in electrical distribution circuits and various industrial applications. Most ratings are available in size 8x31 and size 10x38 with an optional indicator, and in size 14x51 and 22x58 with an optional striker to activate an auxiliary contact. Size 10x38 is also available with striker. All cylindrical fuse-links have ceramic bodies and silver-plated contacts. Cylindrical fuse-links "gG" are used for the protection of cables, motors and LV-networks. They limit and cut off unacceptable overcurrents and short-circuit currents up to their nominal breaking capacity. Cylindrical fuse-links "gG" also protect electrical equipment and installations against the dynamic effect of high short-currents. Our technology and process was designed to ensure highly reliable technical performance.
Full range protection; Visual indication of fuse operation; Safest and most reliable protection system; Reduced size; IEC 60269-1 & -2; Meet IEC, NFC and UNE standard
$6.49
/EA
NOT CURRENTLY IN STOCK
690V CP 22X58 AM 8A P FS
Item #:
Q219779
Supplier Part #: Q219779
Brand:
Mersen
Mersen aM and gG fuse-links cover a wide range of physical sizes and ampere ratings for 400, 500, and 690VAC for protection in electrical distribution circuits and various industrial applications. Most ratings are available in size 8x31 and size 10x38 with an optional indicator, and in size 14x51 and 22x58 with an optional striker to activate an auxiliary contact. Size 10x38 is also available with striker. All cylindrical fuse-links have ceramic bodies and silver-plated contacts. Cylindrical fuse-links "aM" are partial range fuses. They protect electrical devices in case of unacceptable high short-circuit against destruction due high current limiting and low thermal let-through values. They cut off currents more than 6.3xln until the maximum breaking capacity (rated breaking capacity). Cylindrical fuse-links "aM" are mainly used for the protection of installation switch gear in otor circuit currents. For classification of the cylindrical fuse-links the nominal current of the fuse-link can be selected respective to the nominal current of the motor. Our technology and process was designed to ensure highly reliable technical performance.
Reduced size; IEC 60269-1 & -2; Safest and most reliable protection system; Striker version available for remote indication of fuse operation; Approved by Lloyd’s Register of Shipping and Bureau Veritas
$53.32
/EA
NOT CURRENTLY IN STOCK
500V NH3 C/P gG 630A
Item #:
Q219802
Supplier Part #: Q219802
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "gG" NH fuse-links are full range breaking capacity fuse-links and are used to protect cables and equipment. They can interrupt any current surge, from the lowest fusing current up to their breaking capacity, and so can be used alone as protection. They also protect electrical devices and industrial set-ups from the electrodynamic effects of very high short-circuit currents.
IEC 60269-1 and -2; Dimensions according to DIN 43 620 Parts 1 to 4; Lead free contact blades; VDE 0636 Part 201; 0% cadmium
$480.94
/EA
NOT CURRENTLY IN STOCK
