Browse Categories

Connectors

Power Products/Connectors 
Viewing Page 3 of 9 (83 results)
$15.00 /EA
NOT CURRENTLY IN STOCK
ISO 1in- 1/4-20 x 5/16in deep

ISO 1in- 1/4-20 x 5/16in deep

Item #: 559600

Supplier Part #: ISO1-14
Brand: nVent Eriflex

Low voltage electrical insulator. ISO1-14, Imperial Thread, 1" x 1.3" (25.4 mm x 33 mm), 1 1/8" Hex Width, 1/4 UNC Thread.

Great stability of electrical and mechanical parameters; UR – ANSI/UL 67, ANSI/UL 891; RoHS; High resistance to leakage current; CSA-Comp – CSA C22.2 No. 29; UL® Recognized in E125470 and evaluated for dielectric withstand rating of 1,500 VAC/DC; cUR – CSA C22.2 No. 29, CSA C22.2 No. 244; RoHS compliant; Halogen free

$1.07 /EA
NOT CURRENTLY IN STOCK
Unipolar Distribution Block UD 250A

Unipolar Distribution Block UD 250A

Item #: 569040

Supplier Part #: UD-250A
Brand: nVent Eriflex

Primary device for easy assembly between a wide range of conductors to perform electrical power distribution. Single Pole Distribution Block UD-250A, Copper.

CSA – CSA C22.2 No. 158; EN 45545 – EN 45545-2:2013; Modular snap-together blocks for building multi-pole power blocks; RoHS; UKCA, ERIFLEX UD – EN 60947-7-1; Screw retaining cover is hinged and removable; 95% fill ratio; UR – ANSI/UL 1059; Halogen free; cUR – CSA C22.2 No. 158; Tinned copper or aluminum block allows for copper or aluminum conductor direct connections, or using ferrule; Conforms to EN 45545 obtaining an HL3 classification for chapter R23 and HL2 classification for chapter R22; RoHS compliant; Design allows for visual inspection of conductor and confirmation of connection; CE, ERIFLEX UD – EN 60947-7-1; Easily clips onto DIN rail or mounts to panel with screws

$30.36 /EA
NOT CURRENTLY IN STOCK
ISO 3-1/4in - 3/8-16 x 5/8in

ISO 3-1/4in - 3/8-16 x 5/8in

Item #: 559696

Supplier Part #: ISO3-14-38
Brand: nVent Eriflex

Low voltage electrical insulator. ISO3-14-38, Imperial Thread, 3.25" x 2.89" (82.55 mm x 73.3 mm), 2 1/2" Hex Width, 3/8 UNC Thread.

Great stability of electrical and mechanical parameters; UR – ANSI/UL 67, ANSI/UL 891; High resistance to leakage current; RoHS; cUR – CSA C22.2 No. 29, CSA C22.2 No. 244; UL® Recognized in E125470 and evaluated for dielectric withstand rating of 1,500 VAC/DC; CSA-Comp – CSA C22.2 No. 29; Halogen free; RoHS compliant

$7.95 /EA
NOT CURRENTLY IN STOCK
$378.00 /EA
NOT CURRENTLY IN STOCK
ERIFLEX FLEXIBAR 3MTC 2X20X1

ERIFLEX FLEXIBAR 3MTC 2X20X1

Item #: 505501

Supplier Part #: FLEX3MTC2X20X1
Brand: nVent Eriflex

nVent ERIFLEX Flexibar, Tinned Copper, 250 A, UL 67, UL 758 Certification Details, 0.787" x 0.039", 78.94 kcmil

100% production dielectric tested; Reduces total installation cost; Connections made by punching and bolting directly through the copper laminates, clamping onto the end of the nVent ERIFLEX Flexibar, or welding using nVent ERICO Cadweld; RoHS; Bureau Veritas – ACE 14/163/02; Tinned copper allows for copper or aluminum conductor connections; UR – ANSI/UL 67, ANSI/UL 891; Thin layers of tinned electrolytic copper formed into a stack; Better power density than cable with lower skin effect ratio; Easily bent, folded, and twisted, improving assembly flexibility, shortening connections, and decreasing footprint; ABS; UL 758 Appliance Wiring Material requirements for Cold Bend testing at -40°C and -50°C (-40°F and -58°F); CSA – CSA C22.2 No. 0, CSA C22.2 No. 210; RoHS compliant; Insulated by high-resistance, self-extinguishing PVC with less than 20% contact with conductor for high flexibility; UR – ANSI/UL 758; cUR – CSA C22.2 No. 29, CSA C22.2 No. 244; CE, ERIFLEX FLEXIBAR – EN 61439-1; Dramatically smaller and more flexible than comparable cable based on ampacity; Weight savings and material savings compared to wire alternatives; No lugs needed, reducing installation time and improving resistance to vibration; Traceability codes and designation part numbers printed on insulation; EAC compliant

Call
NOT CURRENTLY IN STOCK
ERIFLEX FLEXIBAR 3MTC 3X20X1

ERIFLEX FLEXIBAR 3MTC 3X20X1

Item #: 505502

Supplier Part #: FLEX3MTC3X20X1
Brand: nVent Eriflex

nVent ERIFLEX Flexibar, Tinned Copper, 250 A, UL 67, UL 758 Certification Details, 0.787" x 0.039", 118.41 kcmil

Reduces total installation cost; Thin layers of tinned electrolytic copper formed into a stack; RoHS; No lugs needed, reducing installation time and improving resistance to vibration; Easily bent, folded, and twisted, improving assembly flexibility, shortening connections, and decreasing footprint; 100% production dielectric tested; ABS; UR – ANSI/UL 67, ANSI/UL 891; Weight savings and material savings compared to wire alternatives; Bureau Veritas – ACE 14/163/02; Connections made by punching and bolting directly through the copper laminates, clamping onto the end of the nVent ERIFLEX Flexibar, or welding using nVent ERICO Cadweld; UR – ANSI/UL 758; Tinned copper allows for copper or aluminum conductor connections; EAC compliant; CSA – CSA C22.2 No. 0, CSA C22.2 No. 210; Better power density than cable with lower skin effect ratio; cUR – CSA C22.2 No. 29, CSA C22.2 No. 244; Dramatically smaller and more flexible than comparable cable based on ampacity; RoHS compliant; Traceability codes and designation part numbers printed on insulation; Insulated by high-resistance, self-extinguishing PVC with less than 20% contact with conductor for high flexibility; UL 758 Appliance Wiring Material requirements for Cold Bend testing at -40°C and -50°C (-40°F and -58°F); CE, ERIFLEX FLEXIBAR – EN 61439-1

Call
NOT CURRENTLY IN STOCK
ERIFLEX FLEXIBAR 3MTC 6X20X1

ERIFLEX FLEXIBAR 3MTC 6X20X1

Item #: 505505

Supplier Part #: FLEX3MTC6X20X1
Brand: nVent Eriflex

nVent ERIFLEX Flexibar, Tinned Copper, 400 A, UL 67, UL 758 Certification Details, 0.787" x 0.039", 236.8 kcmil

Easily bent, folded, and twisted, improving assembly flexibility, shortening connections, and decreasing footprint; cUR – CSA C22.2 No. 29, CSA C22.2 No. 244; 100% production dielectric tested; UL 758 Appliance Wiring Material requirements for Cold Bend testing at -40°C and -50°C (-40°F and -58°F); RoHS compliant; ABS; Weight savings and material savings compared to wire alternatives; Connections made by punching and bolting directly through the copper laminates, clamping onto the end of the nVent ERIFLEX Flexibar, or welding using nVent ERICO Cadweld; Tinned copper allows for copper or aluminum conductor connections; Thin layers of tinned electrolytic copper formed into a stack; Bureau Veritas – ACE 14/163/02; Traceability codes and designation part numbers printed on insulation; RoHS; CE, ERIFLEX FLEXIBAR – EN 61439-1; Insulated by high-resistance, self-extinguishing PVC with less than 20% contact with conductor for high flexibility; UR – ANSI/UL 67, ANSI/UL 891; Dramatically smaller and more flexible than comparable cable based on ampacity; EAC compliant; CSA – CSA C22.2 No. 0, CSA C22.2 No. 210; Reduces total installation cost; Better power density than cable with lower skin effect ratio; No lugs needed, reducing installation time and improving resistance to vibration; UR – ANSI/UL 758

Call
NOT CURRENTLY IN STOCK
  • « PREV
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • NEXT »