Search in Category
Fuses
Search term required.
Filter Your Search
Brand
Connection
Connection Type
Country Of Origin
Current
Degree of protection (IP)
Diameter
No Filtered Results...
Frequency
Fuse Size
No Filtered Results...
Fuse Type
Height
No Filtered Results...
Length
No Filtered Results...
Type
No Filtered Results...
Voltage
No Filtered Results...
Voltage Rating
No Filtered Results...
Weight
No Filtered Results...
Width
No Filtered Results...
Wire Type
Shop by Category
Loading...
Fuses
Viewing Page 173 of 1000
(10,000+ results)
NH 2 25A 500V GG
Item #:
N200802
Supplier Part #: N200802
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "gG" NH fuse-links are full range breaking capacity fuse-links and are used to protect cables and equipment. They can interrupt any current surge, from the lowest fusing current up to their breaking capacity, and so can be used alone as protection. They also protect electrical devices and industrial set-ups from the electrodynamic effects of very high short-circuit currents.
IEC 60269-1 and -2; VDE 0636 Part 201; Lead free contact blades; Dimensions according to DIN 43 620 parts 1 to 4; Non-isolated gripping lugs; Double indicator; 0% cadmium
$246.63
/EA
NOT CURRENTLY IN STOCK
690V CP 22X58 AM 8A S/I FS
Item #:
N201308
Supplier Part #: N201308
Brand:
Mersen
Mersen aM and gG fuse-links cover a wide range of physical sizes and ampere ratings for 400, 500, and 690VAC for protection in electrical distribution circuits and various industrial applications. Most ratings are available in size 8x31 and size 10x38 with an optional indicator, and in size 14x51 and 22x58 with an optional striker to activate an auxiliary contact. Size 10x38 is also available with striker. All cylindrical fuse-links have ceramic bodies and silver-plated contacts. Cylindrical fuse-links "aM" are partial range fuses. They protect electrical devices in case of unacceptable high short-circuit against destruction due high current limiting and low thermal let-through values. They cut off currents more than 6.3xln until the maximum breaking capacity (rated breaking capacity). Cylindrical fuse-links "aM" are mainly used for the protection of installation switch gear in otor circuit currents. For classification of the cylindrical fuse-links the nominal current of the fuse-link can be selected respective to the nominal current of the motor. Our technology and process was designed to ensure highly reliable technical performance.
Safest and most reliable protection system; Striker version available for remote indication of fuse operation; IEC 60269-1 & -2; Approved by Lloyd’s Register of Shipping and Bureau Veritas; Reduced size
$41.35
/EA
NOT CURRENTLY IN STOCK
PDB TRIPLE WIDE CU UL1953
Item #:
MPDB800061
Supplier Part #: MPDB800061
Brand:
Mersen
The Next Generation Power Distribution Block (PDB). Mersen power distribution blocks provide a safe and easy method of splicing cables, splitting primary power into secondary circuits and fulfilling requirements for fixed junction tap-off points. All blocks are UL and CSA approved while meeting spacing requirements for feeder and branch circuits in conjunction with UL508A and the National Electrical Code®. PDB options include single or dual conductor primary inputs and up to 30 secondary outputs. Specialty blocks are available allowing for up to 7 primary inputs. The MPDB series is offered in three size categories miniature (MPDB62 and MPDB63 series), intermediate (MPDB66 and MPDB67 series), and large (MPDB68 and MPDB69 series), in both aluminum and copper.
CSA Certified Class 6228 01; UL Listed to subject 1953, File E352417 unless noted otherwise
$1,163.46
/EA
NOT CURRENTLY IN STOCK
NH 000 4A 500V GG SGL
Item #:
N205770
Supplier Part #: N205770
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "gG" NH fuse-links are full range breaking capacity fuse-links and are used to protect cables and equipment. They can interrupt any current surge, from the lowest fusing current up to their breaking capacity, and so can be used alone as protection. They also protect electrical devices and industrial set-ups from the electrodynamic effects of very high short-circuit currents.
Double indicator; Isolated metal gripping lugs (SGL); Dimensions according to DIN 43 620 Parts 1 to 4; 0% cadmium; Lead free contact blades; VDE 0636 Part 201; IEC 60269-1 and -2
$119.44
/EA
NOT CURRENTLY IN STOCK
500V FA 1A 632 AL
$57.20
/EA
NOT CURRENTLY IN STOCK
H 1209P BCKUP 292-56/50
Item #:
N209312
Supplier Part #: N209312
Brand:
Mersen
Mersen HV fuse-links have been used for reliable protection in high-voltage switchgear and controlgear and high-voltage systems for decades. Limitor®-P HV fuses are back-up fuses as defined in the IEC 60282-1 standard and dedicated to protect transformers against effects of short-circuit currents. To guarantee high quality, Mersen uses the best materials fuse-elements are in pure silver, caps are in copper coated with silver and bodies are in ceramic.
Low switching voltage; New cap design for a better compatibility with all types of clips and easier assembly; DIN 43625; Energy efficency; Quick breaking; High current limitation; Medium striker 80N/30mm; Coordination with IEC 60787, IEC 62271-105, IEC/TR 62655; VDE 0670 part 4; Indoor and outdoor applications; IEC 60282-1
$866.67
/EA
NOT CURRENTLY IN STOCK
NH 2 400A 500V GG
Item #:
N211083
Supplier Part #: N211083
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "gG" NH fuse-links are full range breaking capacity fuse-links and are used to protect cables and equipment. They can interrupt any current surge, from the lowest fusing current up to their breaking capacity, and so can be used alone as protection. They also protect electrical devices and industrial set-ups from the electrodynamic effects of very high short-circuit currents.
Lead free contact blades; 0% cadmium; Double indicator; IEC 60269-1 and -2; Non-isolated gripping lugs; VDE 0636 Part 201; Dimensions according to DIN 43 620 parts 1 to 4
$248.98
/EA
NOT CURRENTLY IN STOCK
690V CP 22X58 GG 25A S/I FS
Item #:
N212072
Supplier Part #: N212072
Brand:
Mersen
Mersen aM and gG fuse-links cover a wide range of physical sizes and ampere ratings for 400, 500, and 690VAC for protection in electrical distribution circuits and various industrial applications. Most ratings are available in size 8x31 and size 10x38 with an optional indicator, and in size 14x51 and 22x58 with an optional striker to activate an auxiliary contact. Size 10x38 is also available with striker. All cylindrical fuse-links have ceramic bodies and silver-plated contacts. Cylindrical fuse-links "gG" are used for the protection of cables, motors and LV-networks. They limit and cut off unacceptable overcurrents and short-circuit currents up to their nominal breaking capacity. Cylindrical fuse-links "gG" also protect electrical equipment and installations against the dynamic effect of high short-currents. Our technology and process was designed to ensure highly reliable technical performance.
Full range protection; Approved by Lloyd’s Register of Shipping and Bureau Veritas; IEC 60269-1 & -2; Reduced size; Safest and most reliable protection system; Striker version available for remote indication of fuse operation
$29.72
/EA
NOT CURRENTLY IN STOCK
NH 000 40A 500V GG
Item #:
N212463
Supplier Part #: N212463
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "gG" NH fuse-links are full range breaking capacity fuse-links and are used to protect cables and equipment. They can interrupt any current surge, from the lowest fusing current up to their breaking capacity, and so can be used alone as protection. They also protect electrical devices and industrial set-ups from the electrodynamic effects of very high short-circuit currents.
Non-isolated gripping lugs; VDE 0636 Part 201; Double indicator; 0% cadmium; IEC 60269-1 and -2; Lead free contact blades; Dimensions according to DIN 43 620 parts 1 to 4
$122.26
/EA
NOT CURRENTLY IN STOCK
FUS AM NH2 C/P 315A
Item #:
N212624
Supplier Part #: N212624
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current, it must be handled by a qualified professional.
IEC 60269-1 and -2; Dimensions according to DIN 43 620 Parts 1 to 4; VDE 0636 Part 201; Lead free contact blades; 0% cadmium
$326.63
/EA
NOT CURRENTLY IN STOCK
