Search in Category
Fuses
Search term required.
Filter Your Search
Brand
Connection
Connection Type
Country Of Origin
Current
Degree of protection (IP)
Diameter
No Filtered Results...
Frequency
Fuse Size
No Filtered Results...
Fuse Type
Height
No Filtered Results...
Length
No Filtered Results...
Type
No Filtered Results...
Voltage
No Filtered Results...
Voltage Rating
No Filtered Results...
Weight
No Filtered Results...
Width
No Filtered Results...
Wire Type
Shop by Category
Loading...
Fuses
Viewing Page 178 of 1000
(10,000+ results)
SWITCH ACCESSORY HANDLE KIT (6
Item #:
NFPA792
Supplier Part #: NFPA792
Brand:
Mersen
Mersen FB Series disconnect switches are extremely durable, manually operated, fusible disconnect switches. They employ double break contacts per pole that ensure complete isolation of the fuse when the switch is in the OFF position. With safety in mind, all fusible disconnect switches are supplied with fuse covers and line side shrouding as a standard feature. These switches provide the ultimate in short circuit protection when used with Mersen's Class CC, J or L fuses.These heavyduty switches are designed with the most up-to-date disconnect fuse and switch technology available. Designed to meet the UL98 or UL489 standard, the fusible disconnect switch gives you the product that "makes and breaks" power circuits under load. They have been tested and approved for use in the most demanding applications, such as "Service Entrance." The optional TEST function (up to 400 A) enables testing of the control circuit auxiliaries without switching the main contacts. This function provides a simple alternative to a separately wired push button. A wide array of handles are available to meet OSHA padlocking requirements, NEMA configurations, defeater options and NFPA 79 requirements.
Defeatable pistol handles automatically re-latch when panel door is closed – no tool necessary to reset latch; Service entrance rated; Padlockable handle; Compact footprints; External or direct operation handles; Test positions available up to 400A; Double break contact per pole up to 800 A; Flange-mounted actuators; 14AWG power taps on both line and load sides for control power transformers or surge protection; Modular switch configurations, special executions on request (5-pole, mix ratings…); Front and side operated switches with snap-on auxiliary contact feature; Touch safe covers protect fuse terminals; Padlocking feature as standard on modular switchgear boxes
Call
NOT CURRENTLY IN STOCK
NH 2 35A 500V GG
Item #:
NH2GG50V35
Supplier Part #: NH2GG50V35
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of: fuse-base (possibly including terminal covers and phase barriers) fuse-link with blade contact fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type gG NH fuse-links are full range breaking capacity fuse-links and are used to protect cables and equipment. They can interrupt any current surge, from the lowest fusing current up to their breaking capacity, and so can be used alone as protection. They also protect electrical devices and industrial set-ups from the electrodynamic effects of very high short-circuit currents.
Double indicator; Non-isolated gripping lugs; Dimensions according to DIN 43 620 parts 1 to 4; Lead free contact blades; 0% cadmium
Call
NOT CURRENTLY IN STOCK
ONE-TIME GENERAL PURPOSE FUSES 100A 25
Item #:
NON-100
Brand:
Bussmann
Eaton Bussmann series NON fuse, Supplemental one-time fuse, Non current limiting, Light duty circuit locations, 100 A, Class H, Non-indicating, Blade end x blade end, 50 kAIC at 125 Vdc,10 kAIC at 250 Vac, Standard, 5, 250 V, 125 Vdc
$20.54
/EA
NOT CURRENTLY IN STOCK
H FUSE 250V 10A NRN
Item #:
NRN10
Supplier Part #: NRN10
Brand:
Mersen
Mersen NRN (250V) and NRS (600V) fuses are standard non-time delay fuses, with a 10kA short circuit rating. 250 Volt NRN 15 amp through 60 amp fuses are certified as Type "P" fuses, satisfying the Canadian Electrical Code for low melting-point non-time delay fuses. Also qualifying for Type "P" are OTN15 through OTN60, which are Class K-5 fuses with a 50kA short circuit rating (found in the OT/OTS section of this cata log).
Non-time delay; 250V and 600V applications; Type “P” (15 – 60A)
$25.83
/EA
NOT CURRENTLY IN STOCK
H FUSE 250V 100A NRN
Item #:
NRN100
Supplier Part #: NRN100
Brand:
Mersen
Mersen NRN (250V) and NRS (600V) fuses are standard non-time delay fuses, with a 10kA short circuit rating. 250 Volt NRN 15 amp through 60 amp fuses are certified as Type "P" fuses, satisfying the Canadian Electrical Code for low melting-point non-time delay fuses. Also qualifying for Type "P" are OTN15 through OTN60, which are Class K-5 fuses with a 50kA short circuit rating (found in the OT/OTS section of this cata log).
Type “P” (15 – 60A); 250V and 600V applications; Non-time delay
$75.56
/EA
NOT CURRENTLY IN STOCK
H FUSE 250V 150A NRN
Item #:
NRN150
Supplier Part #: NRN150
Brand:
Mersen
Mersen NRN (250V) and NRS (600V) fuses are standard non-time delay fuses, with a 10kA short circuit rating. 250 Volt NRN 15 amp through 60 amp fuses are certified as Type "P" fuses, satisfying the Canadian Electrical Code for low melting-point non-time delay fuses. Also qualifying for Type "P" are OTN15 through OTN60, which are Class K-5 fuses with a 50kA short circuit rating (found in the OT/OTS section of this cata log).
Type “P” (15 – 60A); 250V and 600V applications; Non-time delay
$104.74
/EA
NOT CURRENTLY IN STOCK
NRN20 BULK PACK
Item #:
NRN20BP
Supplier Part #: NRN20BP
Brand:
Mersen
Mersen NRN (250V) and NRS (600V) fuses are standard non-time delay fuses, with a 10kA short circuit rating. 250 Volt NRN 15 amp through 60 amp fuses are certified as Type "P" fuses, satisfying the Canadian Electrical Code for low melting-point non-time delay fuses. Also qualifying for Type "P" are OTN15 through OTN60, which are Class K-5 fuses with a 50kA short circuit rating (found in the OT/OTS section of this cata log).
250V and 600V applications; Type “P” (15 – 60A); Non-time delay
$23.80
/EA
NOT CURRENTLY IN STOCK
H FUSE 250V 225A NRN
Item #:
NRN225
Supplier Part #: NRN225
Brand:
Mersen
Mersen NRN (250V) and NRS (600V) fuses are standard non-time delay fuses, with a 10kA short circuit rating. 250 Volt NRN 15 amp through 60 amp fuses are certified as Type "P" fuses, satisfying the Canadian Electrical Code for low melting-point non-time delay fuses. Also qualifying for Type "P" are OTN15 through OTN60, which are Class K-5 fuses with a 50kA short circuit rating (found in the OT/OTS section of this cata log).
Type “P” (15 – 60A); Non-time delay; 250V and 600V applications
$210.02
/EA
NOT CURRENTLY IN STOCK
H FUSE 250V 25A NRN
Item #:
NRN25
Supplier Part #: NRN25
Brand:
Mersen
Mersen NRN (250V) and NRS (600V) fuses are standard non-time delay fuses, with a 10kA short circuit rating. 250 Volt NRN 15 amp through 60 amp fuses are certified as Type "P" fuses, satisfying the Canadian Electrical Code for low melting-point non-time delay fuses. Also qualifying for Type "P" are OTN15 through OTN60, which are Class K-5 fuses with a 50kA short circuit rating (found in the OT/OTS section of this cata log).
250V and 600V applications; Type “P” (15 – 60A); Non-time delay
$27.08
/EA
NOT CURRENTLY IN STOCK
H FUSE 250V 300A NRN
Item #:
NRN300
Supplier Part #: NRN300
Brand:
Mersen
Mersen NRN (250V) and NRS (600V) fuses are standard non-time delay fuses, with a 10kA short circuit rating. 250 Volt NRN 15 amp through 60 amp fuses are certified as Type "P" fuses, satisfying the Canadian Electrical Code for low melting-point non-time delay fuses. Also qualifying for Type "P" are OTN15 through OTN60, which are Class K-5 fuses with a 50kA short circuit rating (found in the OT/OTS section of this cata log).
Type “P” (15 – 60A); Non-time delay; 250V and 600V applications
$210.02
/EA
NOT CURRENTLY IN STOCK
