Search in Category
Fuses
Search term required.
Filter Your Search
Brand
Connection
Connection Type
Country Of Origin
Current
Degree of protection (IP)
Diameter
No Filtered Results...
Frequency
Fuse Size
No Filtered Results...
Fuse Type
Height
No Filtered Results...
Length
No Filtered Results...
Type
No Filtered Results...
Voltage
No Filtered Results...
Voltage Rating
No Filtered Results...
Weight
No Filtered Results...
Width
No Filtered Results...
Wire Type
Shop by Category
Loading...
Fuses
Viewing Page 174 of 1000
(10,000+ results)
D03-SICHEINSATZ 100A GL-GG
Item #:
N212647
Supplier Part #: N212647
Brand:
Mersen
The D0 fuse-system is installed in low voltage distribution units, where fuse-links are accessible to non trained persons and can also be replaced by them. The system is the most modern of the screw systems and designed for 400VAC/250VDC networks. The D0 fuse range comprises the standardized fuse sizes D01, D02 and D03. The range of applications for D0 fuse-links for general application is the protection of cables and power lines. They limit and cut off unacceptable overcurrents and short circuit currents up to their nominal breaking capacity. D0 fuse-links "gG" also protect equipments and installations against dynamic effects of high short circuit currents.
Optimized size; Safe cut-off short circuits and over currents due to special design of fuse element; Clear indication of operation condition due to coloured indicator un top contact; DIN VDE 0636-3; Low power dissipation; Top and bottom contacts made of nickel plated or silver plated copper alloy; Insulated body suitable for high mechanical and thermal impacts; Resistant to aging
$186.16
/EA
NOT CURRENTLY IN STOCK
NH 1 63A 500V GG SGL
Item #:
N213153
Supplier Part #: N213153
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "gG" NH fuse-links are full range breaking capacity fuse-links and are used to protect cables and equipment. They can interrupt any current surge, from the lowest fusing current up to their breaking capacity, and so can be used alone as protection. They also protect electrical devices and industrial set-ups from the electrodynamic effects of very high short-circuit currents.
VDE 0636 Part 201; IEC 60269-1 and -2; Double indicator; Lead free contact blades; 0% cadmium; Isolated metal gripping lugs (SGL); Dimensions according to DIN 43 620 Parts 1 to 4
$199.19
/EA
NOT CURRENTLY IN STOCK
690V CP 22X58 AM 40A S/I FS
Item #:
N213613
Supplier Part #: N213613
Brand:
Mersen
Mersen aM and gG fuse-links cover a wide range of physical sizes and ampere ratings for 400, 500, and 690VAC for protection in electrical distribution circuits and various industrial applications. Most ratings are available in size 8x31 and size 10x38 with an optional indicator, and in size 14x51 and 22x58 with an optional striker to activate an auxiliary contact. Size 10x38 is also available with striker. All cylindrical fuse-links have ceramic bodies and silver-plated contacts. Cylindrical fuse-links "aM" are partial range fuses. They protect electrical devices in case of unacceptable high short-circuit against destruction due high current limiting and low thermal let-through values. They cut off currents more than 6.3xln until the maximum breaking capacity (rated breaking capacity). Cylindrical fuse-links "aM" are mainly used for the protection of installation switch gear in otor circuit currents. For classification of the cylindrical fuse-links the nominal current of the fuse-link can be selected respective to the nominal current of the motor. Our technology and process was designed to ensure highly reliable technical performance.
Safest and most reliable protection system; Approved by Lloyd’s Register of Shipping and Bureau Veritas; Striker version available for remote indication of fuse operation; IEC 60269-1 & -2; Reduced size
$41.57
/EA
NOT CURRENTLY IN STOCK
NH 4 400A 690V GG
Item #:
N214004
Supplier Part #: N214004
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "gG" NH fuse-links are full range breaking capacity fuse-links and are used to protect cables and equipment. They can interrupt any current surge, from the lowest fusing current up to their breaking capacity, and so can be used alone as protection. They also protect electrical devices and industrial set-ups from the electrodynamic effects of very high short-circuit currents.
Live tags; 0% cadmium; Top indicator; IEC/EN 60269-1 and -2; VDE 0636 Part 201; Lead free contact blades; Dimensions in accordance with DIN 43 620
$3,289.36
/EA
NOT CURRENTLY IN STOCK
NH 000 80A 500V GG SGL
Item #:
N215016
Supplier Part #: N215016
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "gG" NH fuse-links are full range breaking capacity fuse-links and are used to protect cables and equipment. They can interrupt any current surge, from the lowest fusing current up to their breaking capacity, and so can be used alone as protection. They also protect electrical devices and industrial set-ups from the electrodynamic effects of very high short-circuit currents.
Lead free contact blades; VDE 0636 Part 201; Dimensions according to DIN 43 620 Parts 1 to 4; Isolated metal gripping lugs (SGL); 0% cadmium; IEC 60269-1 and -2; Double indicator
$130.06
/EA
NOT CURRENTLY IN STOCK
BASE SEC CCR10 1P
Item #:
N218213
Supplier Part #: N218213
Brand:
Mersen
The innovative and comprehensive range of Mersen fuse-holders. CCR fuse-holders are finger-safe under IEC standards to an IP20 grade of protection, including fuse changing (with the flick of a finger). CCR fuse-holders are available in 1, 2, 3 poles, in IEC version in a very special compact design. Multi-pole units can also be field assembled by ordering pin-ties assembly kit. CCR range is made of tough and durable thermoplastic material.
IEC 60269-2; Very compact design for small space applications; DIN rail mounting; Single pole + neutral conductor in one single module; RoHS Compliant; Finger safe; IEC 60269-3 and 60947-3 for single pole models; Flame retardant materials with glow wire flammability index to 960°C
$17.33
/EA
NOT CURRENTLY IN STOCK
D01-RECTIEINSATZ 440V 4A GR
Item #:
N218673
Supplier Part #: N218673
Brand:
Mersen
The D0 fuse-system is the most modern of the screw systems in the German DIN standard. This system comprises the sizes D01, D02 and D03. Those D0 ultra-fast acting “gR” ranges are dedicated to semi-conductor protection, in applications where fuse-links are accessible to non-trained persons and can also be changed by them. They are used for the protection of components such as diodes, thyristors or AC/DC motor drives. The “R” stands for the English word Rectifier. D0 fuse-links are available at the rated current range from 2A up to 100A.
Insulated body suitable for high mechanical and thermal impacts; DIN EN 60269-4 (VDE 0636-4); Optimized size; Top and bottom contacts made of nickel-plated/silver-plated copper alloy; Clear indication of operation condition due coloured indicator on top contact; Resistant to aging; IEC 60 269-4; DIN VDE 0636-3; Low power dissipation; Safe cut off short circuits and over currents due special design of fuse element
$46.51
/EA
NOT CURRENTLY IN STOCK
NH 0 63A 500V GG
Item #:
N218765
Supplier Part #: N218765
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "gG" NH fuse-links are full range breaking capacity fuse-links and are used to protect cables and equipment. They can interrupt any current surge, from the lowest fusing current up to their breaking capacity, and so can be used alone as protection. They also protect electrical devices and industrial set-ups from the electrodynamic effects of very high short-circuit currents.
Dimensions according to DIN 43 620 parts 1 to 4; VDE 0636 Part 201; Lead free contact blades; Double indicator; 0% cadmium; Non-isolated gripping lugs; IEC 60269-1 and -2
$150.42
/EA
NOT CURRENTLY IN STOCK
690V NH3 C/P gG 500A
Item #:
N219271
Supplier Part #: N219271
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "gG" NH fuse-links are full range breaking capacity fuse-links and are used to protect cables and equipment. They can interrupt any current surge, from the lowest fusing current up to their breaking capacity, and so can be used alone as protection. They also protect electrical devices and industrial set-ups from the electrodynamic effects of very high short-circuit currents.
Dimensions according to DIN 43 620 Parts 1 to 4; Lead free contact blades; IEC 60269-1 and -2; 0% cadmium; VDE 0636 Part 201
Call
NOT CURRENTLY IN STOCK
PS II 2760 PRE +MC PS
Item #:
N220076
Supplier Part #: N220076
Brand:
Mersen
Fuse holders and fuse disconnectors for ferrule-type fuses 20x127 Solid assembly offering goog thermal and mechanical withstands Fuse mounting in holders or disconnectors with or without preisolating and blown-fuse indicating microswitches Phenolic resin models for basic applications fiber-glass polyester for applications in corrosive atmosphere or in traction
$869.55
/EA
NOT CURRENTLY IN STOCK
