Browse Categories

Search in Category

Fuses

Filter Your Search

Show Attribute Brand
Hide Attribute Connection
Hide Attribute Connection Type
Hide Attribute Country Of Origin
Hide Attribute Current
Hide Attribute Degree of protection (IP)
Hide Attribute Diameter
Hide Attribute Frequency
Hide Attribute Fuse Size
Hide Attribute Fuse Type
Hide Attribute Height
Hide Attribute Length
Hide Attribute Size
Hide Attribute Type
Hide Attribute Voltage
Hide Attribute Voltage Rating
Hide Attribute Weight
Hide Attribute Width
Hide Attribute Wire Type

Shop by Category

Fuses

Power Products/Fuses 
Viewing Page 237 of 1000 (10,000+ results)
Sort By:
View:
DIII-ISOLIERSTOFFRING

DIII-ISOLIERSTOFFRING

Item #: A222870

Supplier Part #: A222870
Brand: Mersen
D fuse-bases Data Sheet D fuse-bases Data Sheet
D fuse-bases Data Sheet D fuse-bases Data Sheet

The D fuse-system is the first generation of the screw fuse-system in the german DIN standard. It is still used in many installations. Applications are low voltage ditribution units, where non trained persons are allowed to change the fuse-links. The D fuse-range comprises the sizes NDZ, DII, DIII, DIV, DV. The range of applications for D fuse-links gG is the protection of cables and power lines. They limit and cut off unacceptable overcurrents and short circuit currents up to their nominal breaking capacity. D fuse-links gG also protect equipments and installations against dynamic effects of high short circuit currents.

Safe cut off short circuits and over currents due to special design of fuse element; Resistant to aging; Insulated body suitable for high mechanical and thermal impacts; Top and bottom contacts made of nickel plated copper alloy; Free of lead, cadmium, mercury, chrome 6 (rohs conformity); Optimized size; Clear indication of operation condition due to coloured indicator on top contact; Low power dissipation

$24.97 /EA
NOT CURRENTLY IN STOCK
ENDKAPPE

ENDKAPPE

Item #: A222939

Supplier Part #: A222939
Brand: Mersen
Bus Bars for D0 Fuse-Holders and Switchgear Data Sheet Bus Bars for D0 Fuse-Holders and Switchgear Data Sheet

Fork Design Wiring bars in fork design are ideal for the wiring of modular panel-mounting devices as per DIN 43880 with flat-type, dual-function or single-screw terminals. Additional incoming terminals are required when wiring devices with flat-type or single-screw terminals. In contrast, devices with dual-function terminals allow bar connection to the top section of the terminal with simultaneous incoming supply in the bottom section. The use of end caps on multi-pole wiring bars guarantees optimum shock-hazard protection and prevents arcing at bar ends. Pin Design Wiring bars in pin design are ideal for the wiring of modular panel-mounting devices to DIN 43880 with box terminal, frame terminal or two-scre clamp. The incoming supply to the wiring-bar system is provided over additional incoming terminals.

max. current-carrying capacity through incoming supply at the center; wiring bars made of copper SF-Cu; high temperature resistant insulating material; low flammable, self-extinguishing and halogen-free insulating material

Call
NOT CURRENTLY IN STOCK
BASE NH 1-PP F/RAIL 1P
BASE NH 1-PP F/RAIL 1P
BASE NH 1-PP F/RAIL 1P

BASE NH 1-PP F/RAIL 1P

Item #: A223008

Supplier Part #: A223008
Brand: Mersen
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/28ba6df4e92a1403c0ca2bd58232d27261663160.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/28ba6df4e92a1403c0ca2bd58232d27261663160.pdf
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/caf26a7042c5c524aeba71eb71c72e0a9f02e26f.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/caf26a7042c5c524aeba71eb71c72e0a9f02e26f.pdf

NH fuse-bases are available for delivery in single-pole and three-pole designs and can be closely mounted in parallel rows. Each three-pole base is upplied with two phase-partition walls. NH fuse-links plugon covers which clip onto the contact springs can also be supplied for these bases. Plastic fuse-bases sizes 00 to 3 have a single-part plastic base while size 4 has a metal baseplate with 2 ceramic bases. The stable silver-plated contact springs are made of electrolytic copper and formed from one piece. Separate springing is provided by highly resilient captive steel springs, making the contact invulnerable to high thermal stress. Size 4 NH fuse-bases are designed for size 4 fuse-links with 8 mm contact blades. A microswitch (250VAC/10A, terminal size 6.3x0.8mm) can be used with NH fuse-links with striker, it operates when fuse melts or where there is no fuse-link. Indirect touch protection fuse bases no microswitch possible. Rated impulse withstand voltage Uimp 6kV / 8kV (sizes 00 / 0-4)

IEC 60269 Compliance; Dimensions in accordance with DIN 43620; Polyamide insulating bases; High-pressure spring contacts; Screw or rail mounting; DIN VDE 0636-2, 0636-21; Multipolar bases possible by direct linkage in 00 size and with separator accessory in sizes 0, 1, 2 and 3; Silver-plated contacts

$200.26 /EA
NOT CURRENTLY IN STOCK
NH 000 4A 400V GG

NH 000 4A 400V GG

Item #: A223675

Supplier Part #: A223675
Brand: Mersen
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/35d6237d9a9fb3b624c08144a7bef897c14c1af1.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/35d6237d9a9fb3b624c08144a7bef897c14c1af1.pdf

The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "gG" NH fuse-links are full range breaking capacity fuse-links and are used to protect cables and equipment. They can interrupt any current surge, from the lowest fusing current up to their breaking capacity, and so can be used alone as protection. They also protect electrical devices and industrial set-ups from the electrodynamic effects of very high short-circuit currents. Rated Power Dissipation values of Mersen NH fuse-links 400VAC are below the maximum values required by standard IEC 60269.

VDE 0636 Part 201; Lead free contact blades; Dimensions according to DIN 43 620 Parts 1 to 4; Double indicator; IEC 60269-1 and -2; Non-isolated gripping lugs; 0% cadmium

$130.06 /EA
NOT CURRENTLY IN STOCK
NH 000 50A 400V GG SGL
NH 000 50A 400V GG SGL
NH 000 50A 400V GG SGL

NH 000 50A 400V GG SGL

Item #: A223698

Supplier Part #: A223698
Brand: Mersen
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/85e8b9b85b4867efbcddeda16cd69261023e2f55.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/85e8b9b85b4867efbcddeda16cd69261023e2f55.pdf

The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "gG" NH fuse-links are full range breaking capacity fuse-links and are used to protect cables and equipment. They can interrupt any current surge, from the lowest fusing current up to their breaking capacity, and so can be used alone as protection. They also protect electrical devices and industrial set-ups from the electrodynamic effects of very high short-circuit currents. Rated Power Dissipation values of Mersen NH fuse-links 400VAC are below the maximum values required by standard IEC 60269.

Double indicator; Lead free contact blades; IEC 60269-1 and -2; Dimensions according to DIN 43 620 Parts 1 to 4; VDE 0636 Part 201; Isolated metal gripping lugs (SGL); 0% cadmium

$130.06 /EA
NOT CURRENTLY IN STOCK
NH 00 100A 690V GG SGL
NH 00 100A 690V GG SGL
NH 00 100A 690V GG SGL

NH 00 100A 690V GG SGL

Item #: A229724

Supplier Part #: A229724
Brand: Mersen
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/ec67ba00e3169d113b85f522acc1717d050ffffe.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/ec67ba00e3169d113b85f522acc1717d050ffffe.pdf

The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "gG" NH fuse-links are full range breaking capacity fuse-links and are used to protect cables and equipment. They can interrupt any current surge, from the lowest fusing current up to their breaking capacity, and so can be used alone as protection. They also protect electrical devices and industrial set-ups from the electrodynamic effects of very high short-circuit currents.

Dimensions according to DIN 43 620 Parts 1 to 4; Lead free contact blades; IEC 60269-1 and -2; Isolated metal gripping lugs (SGL); VDE 0636 Part 201; 0% cadmium; Double indicator

$138.62 /EA
NOT CURRENTLY IN STOCK
A30QS 1-1

A30QS 1-1

Item #: A230000

Supplier Part #: A230000
Brand: Mersen
300V - A30QS Advisor Page 300V - A30QS Advisor Page
A30QS Fuse Electrical Data A30QS Fuse Electrical Data
A30QS(1500-2500)-128 Average Time Current Curve A30QS(1500-2500)-128 Average Time Current Curve
A30QS(225-800)-4 Average Time Current Curve A30QS(225-800)-4 Average Time Current Curve
A30QS(3000-4500)-128 Average Time Current Curve A30QS(3000-4500)-128 Average Time Current Curve
A30QS(5000-6000)-128 Average Time Current Curve A30QS(5000-6000)-128 Average Time Current Curve
A30QS(700-1200)-128 Average Time Current Curve A30QS(700-1200)-128 Average Time Current Curve
A30QS(70-200)-4 Average Time Current Curve A30QS(70-200)-4 Average Time Current Curve
Drawing A30Q(70-200)-4(TI) : PDF (40 KB) DXF (137 KB) Drawing A30Q(70-200)-4(TI) : PDF (40 KB) DXF (137 KB)
Drawing A30QS(101-150)-4L : DXF (127 KB) Drawing A30QS(101-150)-4L : DXF (127 KB)
Drawing A30QS(1-30)-1 : DXF (108 KB) Drawing A30QS(1-30)-1 : DXF (108 KB)
Drawing A30QS(1500-2500)-128 : PDF (47 KB) DXF (155 KB) CAD (330 KB) Drawing A30QS(1500-2500)-128 : PDF (47 KB) DXF (155 KB) CAD (330 KB)
Drawing A30QS(1500-2500)-128IL : PDF (51 KB) DXF (220 KB) CAD (248 KB) Drawing A30QS(1500-2500)-128IL : PDF (51 KB) DXF (220 KB) CAD (248 KB)
Drawing A30QS(225-800)-4(TI) : PDF (39 KB) DXF (142 KB) CAD (152 KB) Drawing A30QS(225-800)-4(TI) : PDF (39 KB) DXF (142 KB) CAD (152 KB)
Drawing A30QS(225-800)-4IL : PDF (40 KB) DXF (168 KB) CAD (168 KB) Drawing A30QS(225-800)-4IL : PDF (40 KB) DXF (168 KB) CAD (168 KB)
Drawing A30QS(3000-4500)-128 : PDF (48 KB) DXF (137 KB) CAD (82 KB) Drawing A30QS(3000-4500)-128 : PDF (48 KB) DXF (137 KB) CAD (82 KB)
Drawing A30QS(3000-4500)-128IL : PDF (40 KB) DXF (167 KB) CAD (192 KB) Drawing A30QS(3000-4500)-128IL : PDF (40 KB) DXF (167 KB) CAD (192 KB)
Drawing A30QS(50-100)-4L : DXF (129 KB) CAD (24 KB) Drawing A30QS(50-100)-4L : DXF (129 KB) CAD (24 KB)
Drawing A30QS(700-1200)-128 : PDF (45 KB) DXF (148 KB) CAD (346 KB) Drawing A30QS(700-1200)-128 : PDF (45 KB) DXF (148 KB) CAD (346 KB)
Drawing A30QS(700-1200)-128IL : PDF (50 KB) DXF (201 KB) CAD (168 KB) Drawing A30QS(700-1200)-128IL : PDF (50 KB) DXF (201 KB) CAD (168 KB)
Drawing A30QS(70-200)-4-4TI : PDF (34 KB) CAD (184 KB) Drawing A30QS(70-200)-4-4TI : PDF (34 KB) CAD (184 KB)
Drawing A30QS(70-200)-4IL : PDF (40 KB) DXF (171 KB) CAD (168 KB) Drawing A30QS(70-200)-4IL : PDF (40 KB) DXF (171 KB) CAD (168 KB)

A30QS Amp-trap Semiconductor Protection fuses are intended for the protection of Power Semiconductors such as Diodes, Phase Control SCR's and other power Semiconductor devices. The A30QS is recommended for new applications providing solutions for your critical protection needs at 300V and less semiconductors

Choice of mounting types helps in equipment design; Low I 2 t minimizes damage to protected component on short circuit.; 300VAC and 300VDC rated; Controlled arc Voltage reduces stress to circuit components during fuse clearing.

$24.36 /EA
NOT CURRENTLY IN STOCK
A15QS60-1

A15QS60-1

Item #: A230092

Supplier Part #: A230092
Brand: Mersen
150V - A15QS Advisor Page 150V - A15QS Advisor Page
A15QS Fuse Electrical Data A15QS Fuse Electrical Data
A15QS(20-100)-4 Average Time Current Curve A15QS(20-100)-4 Average Time Current Curve
A15QS(500-1000)-4 Average Time Current Curve A15QS(500-1000)-4 Average Time Current Curve
A15QS(750-6000)-128 Average Time Current Curve A15QS(750-6000)-128 Average Time Current Curve
Drawing A15QS(1-30)-2 : DXF (117 KB) Drawing A15QS(1-30)-2 : DXF (117 KB)
Drawing A15QS(20-450)-4 : PDF (77 KB) Drawing A15QS(20-450)-4 : PDF (77 KB)
Drawing A15QS(2500-3000)-128 : PDF (32 KB) DXF (148 KB) CAD (138 KB) Drawing A15QS(2500-3000)-128 : PDF (32 KB) DXF (148 KB) CAD (138 KB)
Drawing A15QS(3500-4000)-128 : PDF (48 KB) DXF (152 KB) CAD (342 KB) Drawing A15QS(3500-4000)-128 : PDF (48 KB) DXF (152 KB) CAD (342 KB)
Drawing A15QS(4500-6000)-128 : PDF (48 KB) CAD (83 KB) Drawing A15QS(4500-6000)-128 : PDF (48 KB) CAD (83 KB)
Drawing A15QS(750-2000)-128 : PDF (33 KB) DXF (131 KB) CAD (104 KB) Drawing A15QS(750-2000)-128 : PDF (33 KB) DXF (131 KB) CAD (104 KB)

A15QS Amp-trap Form 101 Semiconductor Protection fuses were designed for the specific protection of diodes and other semiconductor devices rated 150VAC/DC.The A15QS product line's compact design is perfect for those applications that have limitations on available space.

Controlled arc voltage reduces stress to circuit components during fuse clearing.; Choice of mounting types provides options for unique termination requirements; Low I²t minimizes damage to protected components on short circuit.

$52.51 /EA
NOT CURRENTLY IN STOCK
NH 0 100A 500V AM
NH 0 100A 500V AM
NH 0 100A 500V AM

NH 0 100A 500V AM

Item #: A232507

Supplier Part #: A232507
Brand: Mersen
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/fae2b497357973ba0dca485a41905b3d8ddb6a78.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/fae2b497357973ba0dca485a41905b3d8ddb6a78.pdf

The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "aM" NH fuse-links are partial-range breaking capacity fuse-links, used to protect motor circuits as they are strongly current-limiting and have low power losses. They interrupt currents from 6.3 times In up to their maximum breaking capacity and are therefore suited for short-circuit protection only. They must be associated with other switchgear for protection against overloads. These fuse-links can have a rated current equal to the motor's nominal current.

VDE 0636 Part 201; Lead free contact blades; 0% cadmium; IEC 60269-1 and -2; Non-isolated gripping lugs; Double indicator; Dimensions according to DIN 43 620 parts 1 to 4

$160.21 /EA
NOT CURRENTLY IN STOCK
55KV 40 AMPS TYPE 70 MV CA

55KV 40 AMPS TYPE 70 MV CA

Item #: A550C40-70

Supplier Part #: A550C40-70
Brand: Mersen
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/5f8a846a8e4e769e5b767e1c4b91a2bb2fbc81b8.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/5f8a846a8e4e769e5b767e1c4b91a2bb2fbc81b8.pdf
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/6fd13ab10376bd7018bbe1695549480e247fb47c.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/6fd13ab10376bd7018bbe1695549480e247fb47c.pdf

Mersen capacitor fuses are designed to ANSI C37-41. They are currentlimiting operating without noise or discharge and are designed to be used indoors in a general purpose enclosure or outdoors in a weatherproof enclosure. These are non-disconnecting fuses requiring the use of a disconnect switch. These capacitor fuses provide both short circuit and overload protection and are intended to protect against capacitor case rupture or dielectric failure within the capacitor. The various mounting configurations offer manufacturers a wide range of cost/space saving solutions and a large choice of equivalent products

Non-venting for silent operation; High interrupting capacity; Direct mount; Bus mount; Clip style mount; Current limitation; ANSI C37-41; Blown-fuse indication

$305.92 /EA
NOT CURRENTLY IN STOCK
  • « PREV
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241
  • 242
  • NEXT »