Fuses

Feeders; Low cost for high protection value; Easy to read imprint label for quick recognition and replacement; Branch circuits; CSA Certified to Standard C22.2 No. 248.9 (The Canadian Electrical Code requires these fuses in ratings 15 through 60A to be of the low melting point design; use OTN 15-60.); Resistive heating; UL Listed to Standard 248-9 File E2137; Residential and small commercial installations; Self-certified for DC per UL248

UL recognized component UL File E60314; Controlled arc voltage reduces stress to circuit components during fuse clearing; DC: tested to UL standard 198L parameters (10-800A); AC: guide no. JFHR2 (10-1000A); Choice of mounting types helps in equipment design; Low I2t minimizes damage to protected components on short circuit

International 14 × 51mm (2 In x 9/16 In) and 22 × 58mm (2-1/4 In x 13/16 In) sizes for worldwide acceptance; Very low I2t for improved semiconductor protection; Ferrule mount for design versatility; 690V IEC rated, tested at 760VAC; can be used up to 750VAC in U.S.; Superior cycling ability for longer life on difficult cyclic loading applications; 700VDC rated for dc protection of equipment with L/R <= 10ms/c

Ferrule mount for design versatility; 700VDC rated for dc protection of equipment with L/R <= 10ms/c; 690V IEC rated, tested at 760VAC; can be used up to 750VAC in U.S.; Very low I2t for improved semiconductor protection; International 14 × 51mm (2 In x 9/16 In) and 22 × 58mm (2-1/4 In x 13/16 In) sizes for worldwide acceptance; Superior cycling ability for longer life on difficult cyclic loading applications

UL recognized component, AC/DC UL file E60314; DC: tested to UL standard 198L parameters (35-800A); AC: guide no. JFHR2; CSA certified File LR 12636; 700V AC/DC rating gives greater design versatility; Ultra compact sizes allow down-sizing of existing equipment; Low watts loss for cooler operation; Very Low I2t for improved protection of equipment; Superior cycling ability for long, reliable life on high cyclic loading

700VDC rated for dc protection of equipment with L/R <= 10ms/c; International 14 × 51mm (2 In x 9/16 In) and 22 × 58mm (2-1/4 In x 13/16 In) sizes for worldwide acceptance; 690V IEC rated, tested at 760VAC; can be used up to 750VAC in U.S.; Very low I2t for improved semiconductor protection; Superior cycling ability for longer life on difficult cyclic loading applications; Ferrule mount for design versatility

Very Low I2t for improved protection of equipment; Ultra compact sizes allow down-sizing of existing equipment; 700V AC/DC rating gives greater design versatility; UL recognized component, AC/DC UL file E60314; AC: guide no. JFHR2; Low watts loss for cooler operation; CSA certified File LR 12636; Superior cycling ability for long, reliable life on high cyclic loading; DC: tested to UL standard 198L parameters (35-800A)

Superior cycling ability for long, reliable life on high cyclic loading; 700V AC/DC rating gives greater design versatility; Ultra compact sizes allow down-sizing of existing equipment; Low watts loss for cooler operation; UL recognized component, AC/DC UL file E60314; DC: tested to UL standard 198L parameters (35-800A); CSA certified File LR 12636; Very Low I2t for improved protection of equipment; AC: guide no. JFHR2

UL recognized component, AC/DC UL file E60314; DC: tested to UL standard 198L parameters (35-800A); Ultra compact sizes allow down-sizing of existing equipment; Very Low I2t for improved protection of equipment; CSA certified File LR 12636; AC: guide no. JFHR2; Low watts loss for cooler operation; 700V AC/DC rating gives greater design versatility; Superior cycling ability for long, reliable life on high cyclic loading

CSA certified File LR 12636; Superior cycling ability for long, reliable life on high cyclic loading; Low watts loss for cooler operation; UL recognized component, AC/DC UL file E60314; 700V AC/DC rating gives greater design versatility; Very Low I2t for improved protection of equipment; AC: guide no. JFHR2; DC: tested to UL standard 198L parameters (35-800A); Ultra compact sizes allow down-sizing of existing equipment