Browse Categories

Search in Category

Fuses

Filter Your Search

Show Attribute Brand
Hide Attribute Connection
Hide Attribute Connection Type
Hide Attribute Country Of Origin
Hide Attribute Current
Hide Attribute Degree of protection (IP)
Hide Attribute Diameter
Hide Attribute Frequency
Hide Attribute Fuse Size
Hide Attribute Fuse Type
Hide Attribute Height
Hide Attribute Length
Hide Attribute Size
Hide Attribute Type
Hide Attribute Voltage
Hide Attribute Voltage Rating
Hide Attribute Weight
Hide Attribute Width
Hide Attribute Wire Type

Shop by Category

Fuses

Power Products/Fuses 
Viewing Page 34 of 1000 (10,000+ results)
Sort By:
View:
D02-SICHSOCKEL 1POL KAPPE

D02-SICHSOCKEL 1POL KAPPE

Item #: 01721.230000

Supplier Part #: 01721.230000
Brand: Mersen
NEOZED D0 fuse-bases 400VAC Data Sheet NEOZED D0 fuse-bases 400VAC Data Sheet
NEOZED D0 fuse-bases 400VAC Data Sheet NEOZED D0 fuse-bases 400VAC Data Sheet

The D0 fuse-system is installed in low voltage ditribution units, where fuse-links are accessible to non trained persons and can also be replaced by them. This system is the newest generation of screw fuse-system in the german DIN standard and is designed for 400VAC/250VDC networks. The D0 fuse-bases are available in the sizes D01, D02 and D03. D0 fuse-bases are used in combination with D0 fuse-links for the protection of cables and power lines. D0 fuse-links limit and cut-off unacceptable overcurrents and short circuit currents up to their nominal breaking capacity. They also protect equipments and installations against dynamic effects of high short circuit currents.

Insulated body suitable for high mechanical and thermal impacts; Top and bottom contacts made of nickel plated copper alloy; Resistant to aging; Low power dissipation; Safe cut-off short circuits and over currents due to special design of fuse element; Clear indication of operation condition due coloured indicator un top contact; Optimized size

Call
NOT CURRENTLY IN STOCK
130V THERMALLY PROTECTED MOV

130V THERMALLY PROTECTED MOV

Item #: 130TPMOV

Supplier Part #: 130TPMOV
Brand: Mersen
Advisor Page Surge Protection TPMOV Advisor Page Surge Protection TPMOV
Drawing 150-550-TPMOV : PDF (64 KB) DXF (272 KB) CAD (160 KB) Drawing 150-550-TPMOV : PDF (64 KB) DXF (272 KB) CAD (160 KB)

Mersen's patented TPMOV (Thermally Protected Metal Oxide Varistor ) eliminates common destructive failure modes associated with standard MOVs. Comprised of a voltage clamping device and a disconnecting apparatus that monitors the status of the metal oxide disk inside the TPMOV, the device is securely disconnected in the event of an overvoltage by an arc shield. Upon failure, the TPMOV is also equipped with a visual pin indicator as well as a normally open microswitch providing remote indication, if applicable.

Consistent footprint with 25-40mm MOV’s; UL 1449 Third Edition Recognized; Small Package; Visual/Remote Indication; 50kA 8/20MicroSec Max Surge Rating

Call
NOT CURRENTLY IN STOCK
100-30A FUSE REDUCER PR

100-30A FUSE REDUCER PR

Item #: 132

Supplier Part #: 132
Brand: Mersen
600V Class H & K Fuse Reducer Advisor Page 600V Class H & K Fuse Reducer Advisor Page

Mersen fuse reducers allow the use of lower rated fuses in existing equipment having clips with higher ampere ratings. The use of closer rated time-delay fuses can improve circuit protection. For example, renewable or one-time fuses feeding a motor can be replaced with fuses sized closer to the motor nameplate current. Non-rejection reducers will allow Class H, K or R fuses to fit Class H or K clips. Rejection-type reducers will allow only Class R fuses to fit Class R clips or only Class J fuses to fit Class J clips. Class J fuse reducers are not for bolt on applications.
$48.43 /EA
NOT CURRENTLY IN STOCK
THERMALLY PROTECTED MOV 150

THERMALLY PROTECTED MOV 150

Item #: 150TPMOV

Supplier Part #: 150TPMOV
Brand: Mersen
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/068bd0896038deadddbe79ab377d10af07200a92.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/068bd0896038deadddbe79ab377d10af07200a92.pdf
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/c1cf2ff1a674467060fd0135f05d7b039c5085d7.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/c1cf2ff1a674467060fd0135f05d7b039c5085d7.pdf

Mersen’s patented TPMOV technology eliminates common failure modes that occur in the field with standard metal oxide varistors. Internally the TPMOV is comprised of a voltage clamping device and a disconnecting apparatus that monitors the status of the metal oxide disk, making the TPMOV a fail-safe device. In the event of an overvoltage breakdown, the metal oxide disc is securely disconnected from the system power by an arc shield. Upon failure, the TPMOV is also equipped with a visual pin indicator as well as a normally open micro-switch, providing remote indication if applicable. TPMOV7 50% more surge capacity, Same footprint The TPMOV7 is rated for 75kA - 8/20µs peak surge current and is available for maximum continuous operating voltages (MCOV) from 150V to 320VAC.

Built-in visual/remote indication optional; Wave solderable; No additional overcurrent protective device (fuses) required; RoHS Compliant; ANSI/UL 1449 4th Edition, Type 1 Component Assembly SPD, File E210793; Consistent footprint with 25–40mm MOVs; Industry-leading, patented TPMOV technology available in 50kA and 75kA surge capacities

$79.99 /EA
NOT CURRENTLY IN STOCK
THERMALLY PROTECTED MOV 150-HV

THERMALLY PROTECTED MOV 150-HV

Item #: 150TPMOV-HV

Supplier Part #: 150TPMOV-HV
Brand: Mersen
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/068bd0896038deadddbe79ab377d10af07200a92.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/068bd0896038deadddbe79ab377d10af07200a92.pdf
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/c1cf2ff1a674467060fd0135f05d7b039c5085d7.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/c1cf2ff1a674467060fd0135f05d7b039c5085d7.pdf

Mersen’s patented TPMOV technology eliminates common failure modes that occur in the field with standard metal oxide varistors. Internally the TPMOV is comprised of a voltage clamping device and a disconnecting apparatus that monitors the status of the metal oxide disk, making the TPMOV a fail-safe device. In the event of an overvoltage breakdown, the metal oxide disc is securely disconnected from the system power by an arc shield. Upon failure, the TPMOV is also equipped with a visual pin indicator as well as a normally open micro-switch, providing remote indication if applicable. TPMOV7 50% more surge capacity, Same footprint The TPMOV7 is rated for 75kA - 8/20µs peak surge current and is available for maximum continuous operating voltages (MCOV) from 150V to 320VAC.

RoHS Compliant; Wave solderable; Built-in visual/remote indication optional; Consistent footprint with 25–40mm MOVs; No additional overcurrent protective device (fuses) required; Industry-leading, patented TPMOV technology available in 50kA and 75kA surge capacities; ANSI/UL 1449 4th Edition, Type 1 Component Assembly SPD, File E210793

$207.71 /EA
NOT CURRENTLY IN STOCK
TPMOV T1 34MM 75KA 150V SL

TPMOV T1 34MM 75KA 150V SL

Item #: 150TPMOV7SL

Supplier Part #: 150TPMOV7SL
Brand: Mersen
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/068bd0896038deadddbe79ab377d10af07200a92.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/068bd0896038deadddbe79ab377d10af07200a92.pdf
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/c1cf2ff1a674467060fd0135f05d7b039c5085d7.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/c1cf2ff1a674467060fd0135f05d7b039c5085d7.pdf

Mersen’s patented TPMOV technology eliminates common failure modes that occur in the field with standard metal oxide varistors. Internally the TPMOV is comprised of a voltage clamping device and a disconnecting apparatus that monitors the status of the metal oxide disk, making the TPMOV a fail-safe device. In the event of an overvoltage breakdown, the metal oxide disc is securely disconnected from the system power by an arc shield. Upon failure, the TPMOV is also equipped with a visual pin indicator as well as a normally open micro-switch, providing remote indication if applicable. TPMOV7 50% more surge capacity, Same footprint The TPMOV7 is rated for 75kA - 8/20µs peak surge current and is available for maximum continuous operating voltages (MCOV) from 150V to 320VAC.

Consistent footprint with 25–40mm MOVs; Wave solderable; Industry-leading, patented TPMOV technology available in 50kA and 75kA surge capacities; ANSI/UL 1449 4th Edition, Type 1 Component Assembly SPD, File E210793; Built-in visual/remote indication optional; No additional overcurrent protective device (fuses) required; RoHS Compliant

$119.99 /EA
NOT CURRENTLY IN STOCK
150VAC TPMOV SHORT LEAD W/REM

150VAC TPMOV SHORT LEAD W/REM

Item #: 150TPMOVS-HV

Supplier Part #: 150TPMOVS-HV
Brand: Mersen
Advisor Page Surge Protection TPMOV Advisor Page Surge Protection TPMOV
Drawing 150-550-TPMOV : PDF (64 KB) DXF (272 KB) CAD (160 KB) Drawing 150-550-TPMOV : PDF (64 KB) DXF (272 KB) CAD (160 KB)

Mersen's patented TPMOV (Thermally Protected Metal Oxide Varistor ) eliminates common destructive failure modes associated with standard MOVs. Comprised of a voltage clamping device and a disconnecting apparatus that monitors the status of the metal oxide disk inside the TPMOV, the device is securely disconnected in the event of an overvoltage by an arc shield. Upon failure, the TPMOV is also equipped with a visual pin indicator as well as a normally open microswitch providing remote indication, if applicable.

Consistent footprint with 25-40mm MOV’s; Small Package; Visual/Remote Indication; UL 1449 Third Edition Recognized; 50kA 8/20MicroSec Max Surge Rating

$238.86 /EA
NOT CURRENTLY IN STOCK
150TPMOV SHORT LEAD WITH VISUA

150TPMOV SHORT LEAD WITH VISUA

Item #: 150TPMOVSLT

Supplier Part #: 150TPMOVSLT
Brand: Mersen
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/068bd0896038deadddbe79ab377d10af07200a92.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/068bd0896038deadddbe79ab377d10af07200a92.pdf
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/c1cf2ff1a674467060fd0135f05d7b039c5085d7.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/c1cf2ff1a674467060fd0135f05d7b039c5085d7.pdf

Mersen’s patented TPMOV technology eliminates common failure modes that occur in the field with standard metal oxide varistors. Internally the TPMOV is comprised of a voltage clamping device and a disconnecting apparatus that monitors the status of the metal oxide disk, making the TPMOV a fail-safe device. In the event of an overvoltage breakdown, the metal oxide disc is securely disconnected from the system power by an arc shield. Upon failure, the TPMOV is also equipped with a visual pin indicator as well as a normally open micro-switch, providing remote indication if applicable. TPMOV7 50% more surge capacity, Same footprint The TPMOV7 is rated for 75kA - 8/20µs peak surge current and is available for maximum continuous operating voltages (MCOV) from 150V to 320VAC.

Wave solderable; RoHS Compliant; Industry-leading, patented TPMOV technology available in 50kA and 75kA surge capacities; No additional overcurrent protective device (fuses) required; Consistent footprint with 25–40mm MOVs; ANSI/UL 1449 4th Edition, Type 1 Component Assembly SPD, File E210793; Built-in visual/remote indication optional

$205.12 /EA
NOT CURRENTLY IN STOCK
150 TPMOV SHORT LEAD WITH VISU

150 TPMOV SHORT LEAD WITH VISU

Item #: 150TPMOVST

Supplier Part #: 150TPMOVST
Brand: Mersen
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/068bd0896038deadddbe79ab377d10af07200a92.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/068bd0896038deadddbe79ab377d10af07200a92.pdf
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/c1cf2ff1a674467060fd0135f05d7b039c5085d7.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/c1cf2ff1a674467060fd0135f05d7b039c5085d7.pdf

Mersen’s patented TPMOV technology eliminates common failure modes that occur in the field with standard metal oxide varistors. Internally the TPMOV is comprised of a voltage clamping device and a disconnecting apparatus that monitors the status of the metal oxide disk, making the TPMOV a fail-safe device. In the event of an overvoltage breakdown, the metal oxide disc is securely disconnected from the system power by an arc shield. Upon failure, the TPMOV is also equipped with a visual pin indicator as well as a normally open micro-switch, providing remote indication if applicable. TPMOV7 50% more surge capacity, Same footprint The TPMOV7 is rated for 75kA - 8/20µs peak surge current and is available for maximum continuous operating voltages (MCOV) from 150V to 320VAC.

RoHS Compliant; ANSI/UL 1449 4th Edition, Type 1 Component Assembly SPD, File E210793; No additional overcurrent protective device (fuses) required; Industry-leading, patented TPMOV technology available in 50kA and 75kA surge capacities; Consistent footprint with 25–40mm MOVs; Built-in visual/remote indication optional; Wave solderable

$205.12 /EA
NOT CURRENTLY IN STOCK
150V THERMAL MOV

150V THERMAL MOV

Item #: 150TPMOVTS

Supplier Part #: 150TPMOVTS
Brand: Mersen
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/068bd0896038deadddbe79ab377d10af07200a92.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/068bd0896038deadddbe79ab377d10af07200a92.pdf
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/c1cf2ff1a674467060fd0135f05d7b039c5085d7.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/c1cf2ff1a674467060fd0135f05d7b039c5085d7.pdf

Mersen’s patented TPMOV technology eliminates common failure modes that occur in the field with standard metal oxide varistors. Internally the TPMOV is comprised of a voltage clamping device and a disconnecting apparatus that monitors the status of the metal oxide disk, making the TPMOV a fail-safe device. In the event of an overvoltage breakdown, the metal oxide disc is securely disconnected from the system power by an arc shield. Upon failure, the TPMOV is also equipped with a visual pin indicator as well as a normally open micro-switch, providing remote indication if applicable. TPMOV7 50% more surge capacity, Same footprint The TPMOV7 is rated for 75kA - 8/20µs peak surge current and is available for maximum continuous operating voltages (MCOV) from 150V to 320VAC.

Wave solderable; ANSI/UL 1449 4th Edition, Type 1 Component Assembly SPD, File E210793; Industry-leading, patented TPMOV technology available in 50kA and 75kA surge capacities; Built-in visual/remote indication optional; No additional overcurrent protective device (fuses) required; Consistent footprint with 25–40mm MOVs; RoHS Compliant

$79.99 /EA
NOT CURRENTLY IN STOCK
  • « PREV
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • NEXT »