Browse Categories

Search in Category

Fuses

Filter Your Search

Show Attribute Brand
Hide Attribute Connection
Hide Attribute Connection Type
Hide Attribute Country Of Origin
Hide Attribute Current
Hide Attribute Degree of protection (IP)
Hide Attribute Diameter
Hide Attribute Frequency
Hide Attribute Fuse Size
Hide Attribute Fuse Type
Hide Attribute Height
Hide Attribute Length
Hide Attribute Size
Hide Attribute Type
Hide Attribute Voltage
Hide Attribute Voltage Rating
Hide Attribute Weight
Hide Attribute Width
Hide Attribute Wire Type

Shop by Category

Fuses

Power Products/Fuses 
Viewing Page 202 of 1000 (10,000+ results)
Sort By:
View:
CABLE FUSE 600V 4/0AWG A6

CABLE FUSE 600V 4/0AWG A6

Item #: CP4/0A6

Supplier Part #: CP4/0A6
Brand: Mersen
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/192494565f2228144e6d1d64fe0315f507ad052b.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/192494565f2228144e6d1d64fe0315f507ad052b.pdf
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/581e8059561658d6d4060b71c1f36953d329b0e6.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/581e8059561658d6d4060b71c1f36953d329b0e6.pdf

Mersen CP cable protectors are special purpose limiters which are crimped or bolted to cables to clear and isolate faults quickly, increasing the reliability of service entrance and distribution runs. They are current-limiting with a 200,000A interrupting rating, yet will carry low cable overloads which are handled by standard protective devices. Cable protectors are rated in terms of cable size and material (Al or Cu). Heat shrinkable (HS) tubing can be specified for field installation. For cables smaller than 4/0, class J fuses can be used.

Crimp terminals for aluminum cable include oxide inhibitor; Permitted by National Electrical Code®; UL listed to File E305297; Fiberglass bodies for dimensional stability in harsh environments; Molded rubber boots or heat shrinkable tubing available for insulation and protection; Current limiting device; Catalog number stamped into terminal for permanent identification

$1,514.08 /EA
NOT CURRENTLY IN STOCK
CABLE FUSE 600V 4/0AWG A6-HS

CABLE FUSE 600V 4/0AWG A6-HS

Item #: CP4/0A6-HS

Supplier Part #: CP4/0A6-HS
Brand: Mersen
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/192494565f2228144e6d1d64fe0315f507ad052b.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/192494565f2228144e6d1d64fe0315f507ad052b.pdf
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/581e8059561658d6d4060b71c1f36953d329b0e6.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/581e8059561658d6d4060b71c1f36953d329b0e6.pdf

Mersen CP cable protectors are special purpose limiters which are crimped or bolted to cables to clear and isolate faults quickly, increasing the reliability of service entrance and distribution runs. They are current-limiting with a 200,000A interrupting rating, yet will carry low cable overloads which are handled by standard protective devices. Cable protectors are rated in terms of cable size and material (Al or Cu). Heat shrinkable (HS) tubing can be specified for field installation. For cables smaller than 4/0, class J fuses can be used.

Current limiting device; UL listed to File E305297; Fiberglass bodies for dimensional stability in harsh environments; Crimp terminals for aluminum cable include oxide inhibitor; Molded rubber boots or heat shrinkable tubing available for insulation and protection; Permitted by National Electrical Code®; Catalog number stamped into terminal for permanent identification

$1,859.44 /EA
NOT CURRENTLY IN STOCK
CABLE FUSE 600V 4/0AWG C1

CABLE FUSE 600V 4/0AWG C1

Item #: CP4/0C1

Supplier Part #: CP4/0C1
Brand: Mersen
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/192494565f2228144e6d1d64fe0315f507ad052b.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/192494565f2228144e6d1d64fe0315f507ad052b.pdf
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/581e8059561658d6d4060b71c1f36953d329b0e6.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/581e8059561658d6d4060b71c1f36953d329b0e6.pdf

Mersen CP cable protectors are special purpose limiters which are crimped or bolted to cables to clear and isolate faults quickly, increasing the reliability of service entrance and distribution runs. They are current-limiting with a 200,000A interrupting rating, yet will carry low cable overloads which are handled by standard protective devices. Cable protectors are rated in terms of cable size and material (Al or Cu). Heat shrinkable (HS) tubing can be specified for field installation. For cables smaller than 4/0, class J fuses can be used.

Fiberglass bodies for dimensional stability in harsh environments; Crimp terminals for aluminum cable include oxide inhibitor; UL listed to File E305297; Catalog number stamped into terminal for permanent identification; Current limiting device; Molded rubber boots or heat shrinkable tubing available for insulation and protection; Permitted by National Electrical Code®

$921.21 /EA
NOT CURRENTLY IN STOCK
93583-FUSECABLE PROTECTO

93583-FUSECABLE PROTECTO

Item #: CP4/0C1-HS

Supplier Part #: CP4/0C1-HS
Brand: Mersen
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/192494565f2228144e6d1d64fe0315f507ad052b.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/192494565f2228144e6d1d64fe0315f507ad052b.pdf
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/581e8059561658d6d4060b71c1f36953d329b0e6.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/581e8059561658d6d4060b71c1f36953d329b0e6.pdf

Mersen CP cable protectors are special purpose limiters which are crimped or bolted to cables to clear and isolate faults quickly, increasing the reliability of service entrance and distribution runs. They are current-limiting with a 200,000A interrupting rating, yet will carry low cable overloads which are handled by standard protective devices. Cable protectors are rated in terms of cable size and material (Al or Cu). Heat shrinkable (HS) tubing can be specified for field installation. For cables smaller than 4/0, class J fuses can be used.

Crimp terminals for aluminum cable include oxide inhibitor; Current limiting device; Molded rubber boots or heat shrinkable tubing available for insulation and protection; Permitted by National Electrical Code®; Fiberglass bodies for dimensional stability in harsh environments; UL listed to File E305297; Catalog number stamped into terminal for permanent identification

$1,201.31 /EA
NOT CURRENTLY IN STOCK
600V CABLE PROTECTOR 4/0 CABLE

600V CABLE PROTECTOR 4/0 CABLE

Item #: CP4/0C2

Supplier Part #: CP4/0C2
Brand: Mersen
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/192494565f2228144e6d1d64fe0315f507ad052b.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/192494565f2228144e6d1d64fe0315f507ad052b.pdf
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/581e8059561658d6d4060b71c1f36953d329b0e6.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/581e8059561658d6d4060b71c1f36953d329b0e6.pdf

Mersen CP cable protectors are special purpose limiters which are crimped or bolted to cables to clear and isolate faults quickly, increasing the reliability of service entrance and distribution runs. They are current-limiting with a 200,000A interrupting rating, yet will carry low cable overloads which are handled by standard protective devices. Cable protectors are rated in terms of cable size and material (Al or Cu). Heat shrinkable (HS) tubing can be specified for field installation. For cables smaller than 4/0, class J fuses can be used.

Permitted by National Electrical Code®; Catalog number stamped into terminal for permanent identification; Crimp terminals for aluminum cable include oxide inhibitor; Molded rubber boots or heat shrinkable tubing available for insulation and protection; Fiberglass bodies for dimensional stability in harsh environments; Current limiting device; UL listed to File E305297

$1,008.25 /EA
NOT CURRENTLY IN STOCK
CABLE FUSE 600V 4/0AWG C3

CABLE FUSE 600V 4/0AWG C3

Item #: CP4/0C3

Supplier Part #: CP4/0C3
Brand: Mersen
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/192494565f2228144e6d1d64fe0315f507ad052b.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/192494565f2228144e6d1d64fe0315f507ad052b.pdf
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/581e8059561658d6d4060b71c1f36953d329b0e6.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/581e8059561658d6d4060b71c1f36953d329b0e6.pdf

Mersen CP cable protectors are special purpose limiters which are crimped or bolted to cables to clear and isolate faults quickly, increasing the reliability of service entrance and distribution runs. They are current-limiting with a 200,000A interrupting rating, yet will carry low cable overloads which are handled by standard protective devices. Cable protectors are rated in terms of cable size and material (Al or Cu). Heat shrinkable (HS) tubing can be specified for field installation. For cables smaller than 4/0, class J fuses can be used.

Crimp terminals for aluminum cable include oxide inhibitor; Molded rubber boots or heat shrinkable tubing available for insulation and protection; Permitted by National Electrical Code®; Catalog number stamped into terminal for permanent identification; Current limiting device; UL listed to File E305297; Fiberglass bodies for dimensional stability in harsh environments

$887.18 /EA
NOT CURRENTLY IN STOCK
CABLE FUSE 600V 4/0AWG C3-HS

CABLE FUSE 600V 4/0AWG C3-HS

Item #: CP4/0C3-HS

Supplier Part #: CP4/0C3-HS
Brand: Mersen
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/192494565f2228144e6d1d64fe0315f507ad052b.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/192494565f2228144e6d1d64fe0315f507ad052b.pdf
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/581e8059561658d6d4060b71c1f36953d329b0e6.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/581e8059561658d6d4060b71c1f36953d329b0e6.pdf

Mersen CP cable protectors are special purpose limiters which are crimped or bolted to cables to clear and isolate faults quickly, increasing the reliability of service entrance and distribution runs. They are current-limiting with a 200,000A interrupting rating, yet will carry low cable overloads which are handled by standard protective devices. Cable protectors are rated in terms of cable size and material (Al or Cu). Heat shrinkable (HS) tubing can be specified for field installation. For cables smaller than 4/0, class J fuses can be used.

Molded rubber boots or heat shrinkable tubing available for insulation and protection; UL listed to File E305297; Catalog number stamped into terminal for permanent identification; Current limiting device; Fiberglass bodies for dimensional stability in harsh environments; Permitted by National Electrical Code®; Crimp terminals for aluminum cable include oxide inhibitor

$1,157.21 /EA
NOT CURRENTLY IN STOCK
CABLE FUSE 600V 4/0AWG C5

CABLE FUSE 600V 4/0AWG C5

Item #: CP4/0C5

Supplier Part #: CP4/0C5
Brand: Mersen
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/192494565f2228144e6d1d64fe0315f507ad052b.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/192494565f2228144e6d1d64fe0315f507ad052b.pdf
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/581e8059561658d6d4060b71c1f36953d329b0e6.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/581e8059561658d6d4060b71c1f36953d329b0e6.pdf

Mersen CP cable protectors are special purpose limiters which are crimped or bolted to cables to clear and isolate faults quickly, increasing the reliability of service entrance and distribution runs. They are current-limiting with a 200,000A interrupting rating, yet will carry low cable overloads which are handled by standard protective devices. Cable protectors are rated in terms of cable size and material (Al or Cu). Heat shrinkable (HS) tubing can be specified for field installation. For cables smaller than 4/0, class J fuses can be used.

Fiberglass bodies for dimensional stability in harsh environments; Crimp terminals for aluminum cable include oxide inhibitor; Catalog number stamped into terminal for permanent identification; UL listed to File E305297; Current limiting device; Permitted by National Electrical Code®; Molded rubber boots or heat shrinkable tubing available for insulation and protection

$1,111.75 /EA
NOT CURRENTLY IN STOCK
CABLE FUSE 600V 4/0AWG C5-HS
CABLE FUSE 600V 4/0AWG C5-HS
CABLE FUSE 600V 4/0AWG C5-HS

CABLE FUSE 600V 4/0AWG C5-HS

Item #: CP4/0C5-HS

Supplier Part #: CP4/0C5-HS
Brand: Mersen
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/192494565f2228144e6d1d64fe0315f507ad052b.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/192494565f2228144e6d1d64fe0315f507ad052b.pdf
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/581e8059561658d6d4060b71c1f36953d329b0e6.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/581e8059561658d6d4060b71c1f36953d329b0e6.pdf
Spec Sheet Spec Sheet

Mersen CP cable protectors are special purpose limiters which are crimped or bolted to cables to clear and isolate faults quickly, increasing the reliability of service entrance and distribution runs. They are current-limiting with a 200,000A interrupting rating, yet will carry low cable overloads which are handled by standard protective devices. Cable protectors are rated in terms of cable size and material (Al or Cu). Heat shrinkable (HS) tubing can be specified for field installation. For cables smaller than 4/0, class J fuses can be used.

Crimp terminals for aluminum cable include oxide inhibitor; UL listed to File E305297; Catalog number stamped into terminal for permanent identification; Current limiting device; Permitted by National Electrical Code®; Fiberglass bodies for dimensional stability in harsh environments; Molded rubber boots or heat shrinkable tubing available for insulation and protection

$1,414.32 /EA
NOT CURRENTLY IN STOCK
93186-FUSECABLE PROTECTOR

93186-FUSECABLE PROTECTOR

Item #: CP4/0C5-TI

Supplier Part #: CP4/0C5-TI
Brand: Mersen
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/192494565f2228144e6d1d64fe0315f507ad052b.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/192494565f2228144e6d1d64fe0315f507ad052b.pdf
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/581e8059561658d6d4060b71c1f36953d329b0e6.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/581e8059561658d6d4060b71c1f36953d329b0e6.pdf

Mersen CP cable protectors are special purpose limiters which are crimped or bolted to cables to clear and isolate faults quickly, increasing the reliability of service entrance and distribution runs. They are current-limiting with a 200,000A interrupting rating, yet will carry low cable overloads which are handled by standard protective devices. Cable protectors are rated in terms of cable size and material (Al or Cu). Heat shrinkable (HS) tubing can be specified for field installation. For cables smaller than 4/0, class J fuses can be used.

Fiberglass bodies for dimensional stability in harsh environments; Catalog number stamped into terminal for permanent identification; Current limiting device; UL listed to File E305297; Permitted by National Electrical Code®; Crimp terminals for aluminum cable include oxide inhibitor; Molded rubber boots or heat shrinkable tubing available for insulation and protection

$1,328.08 /EA
NOT CURRENTLY IN STOCK
  • « PREV
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • NEXT »