Browse Categories

Search in Category

Fuses

Filter Your Search

Show Attribute Brand
Hide Attribute Connection
Hide Attribute Connection Type
Hide Attribute Country Of Origin
Hide Attribute Current
Hide Attribute Degree of protection (IP)
Hide Attribute Diameter
Hide Attribute Frequency
Hide Attribute Fuse Size
Hide Attribute Fuse Type
Hide Attribute Height
Hide Attribute Length
Hide Attribute Size
Hide Attribute Type
Hide Attribute Voltage
Hide Attribute Voltage Rating
Hide Attribute Weight
Hide Attribute Width
Hide Attribute Wire Type

Shop by Category

Fuses

Power Products/Fuses 
Viewing Page 205 of 1000 (10,000+ results)
Sort By:
View:
93150-FUSECABLE PROTECTO

93150-FUSECABLE PROTECTO

Item #: CP500C3-HS

Supplier Part #: CP500C3-HS
Brand: Mersen
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/192494565f2228144e6d1d64fe0315f507ad052b.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/192494565f2228144e6d1d64fe0315f507ad052b.pdf
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/581e8059561658d6d4060b71c1f36953d329b0e6.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/581e8059561658d6d4060b71c1f36953d329b0e6.pdf

Mersen CP cable protectors are special purpose limiters which are crimped or bolted to cables to clear and isolate faults quickly, increasing the reliability of service entrance and distribution runs. They are current-limiting with a 200,000A interrupting rating, yet will carry low cable overloads which are handled by standard protective devices. Cable protectors are rated in terms of cable size and material (Al or Cu). Heat shrinkable (HS) tubing can be specified for field installation. For cables smaller than 4/0, class J fuses can be used.

Current limiting device; Catalog number stamped into terminal for permanent identification; Crimp terminals for aluminum cable include oxide inhibitor; Permitted by National Electrical Code®; Molded rubber boots or heat shrinkable tubing available for insulation and protection; Fiberglass bodies for dimensional stability in harsh environments; UL listed to File E305297

$1,579.39 /EA
NOT CURRENTLY IN STOCK
93178-FUSECABLE PROTECTOR
93178-FUSECABLE PROTECTOR
93178-FUSECABLE PROTECTOR

93178-FUSECABLE PROTECTOR

Item #: CP500C3-TI

Supplier Part #: CP500C3-TI
Brand: Mersen
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/192494565f2228144e6d1d64fe0315f507ad052b.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/192494565f2228144e6d1d64fe0315f507ad052b.pdf
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/581e8059561658d6d4060b71c1f36953d329b0e6.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/581e8059561658d6d4060b71c1f36953d329b0e6.pdf
Spec Sheet Spec Sheet

Mersen CP cable protectors are special purpose limiters which are crimped or bolted to cables to clear and isolate faults quickly, increasing the reliability of service entrance and distribution runs. They are current-limiting with a 200,000A interrupting rating, yet will carry low cable overloads which are handled by standard protective devices. Cable protectors are rated in terms of cable size and material (Al or Cu). Heat shrinkable (HS) tubing can be specified for field installation. For cables smaller than 4/0, class J fuses can be used.

Molded rubber boots or heat shrinkable tubing available for insulation and protection; Current limiting device; UL listed to File E305297; Crimp terminals for aluminum cable include oxide inhibitor; Fiberglass bodies for dimensional stability in harsh environments; Catalog number stamped into terminal for permanent identification; Permitted by National Electrical Code®

$1,577.09 /EA
NOT CURRENTLY IN STOCK
CABLE FUSE 600V 500MCM C5

CABLE FUSE 600V 500MCM C5

Item #: CP500C5

Supplier Part #: CP500C5
Brand: Mersen
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/192494565f2228144e6d1d64fe0315f507ad052b.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/192494565f2228144e6d1d64fe0315f507ad052b.pdf
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/581e8059561658d6d4060b71c1f36953d329b0e6.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/581e8059561658d6d4060b71c1f36953d329b0e6.pdf

Mersen CP cable protectors are special purpose limiters which are crimped or bolted to cables to clear and isolate faults quickly, increasing the reliability of service entrance and distribution runs. They are current-limiting with a 200,000A interrupting rating, yet will carry low cable overloads which are handled by standard protective devices. Cable protectors are rated in terms of cable size and material (Al or Cu). Heat shrinkable (HS) tubing can be specified for field installation. For cables smaller than 4/0, class J fuses can be used.

Fiberglass bodies for dimensional stability in harsh environments; Current limiting device; Crimp terminals for aluminum cable include oxide inhibitor; Molded rubber boots or heat shrinkable tubing available for insulation and protection; UL listed to File E305297; Permitted by National Electrical Code®; Catalog number stamped into terminal for permanent identification

$1,262.18 /EA
NOT CURRENTLY IN STOCK
93197-FUSECABLE PROTECTO

93197-FUSECABLE PROTECTO

Item #: CP500C5-HS

Supplier Part #: CP500C5-HS
Brand: Mersen
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/192494565f2228144e6d1d64fe0315f507ad052b.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/192494565f2228144e6d1d64fe0315f507ad052b.pdf
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/581e8059561658d6d4060b71c1f36953d329b0e6.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/581e8059561658d6d4060b71c1f36953d329b0e6.pdf

Mersen CP cable protectors are special purpose limiters which are crimped or bolted to cables to clear and isolate faults quickly, increasing the reliability of service entrance and distribution runs. They are current-limiting with a 200,000A interrupting rating, yet will carry low cable overloads which are handled by standard protective devices. Cable protectors are rated in terms of cable size and material (Al or Cu). Heat shrinkable (HS) tubing can be specified for field installation. For cables smaller than 4/0, class J fuses can be used.

Catalog number stamped into terminal for permanent identification; Fiberglass bodies for dimensional stability in harsh environments; Current limiting device; UL listed to File E305297; Permitted by National Electrical Code®; Molded rubber boots or heat shrinkable tubing available for insulation and protection; Crimp terminals for aluminum cable include oxide inhibitor

$1,579.55 /EA
NOT CURRENTLY IN STOCK
CABLE FUSE 600V 500MCM C6

CABLE FUSE 600V 500MCM C6

Item #: CP500C6

Supplier Part #: CP500C6
Brand: Mersen
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/192494565f2228144e6d1d64fe0315f507ad052b.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/192494565f2228144e6d1d64fe0315f507ad052b.pdf
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/581e8059561658d6d4060b71c1f36953d329b0e6.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/581e8059561658d6d4060b71c1f36953d329b0e6.pdf

Mersen CP cable protectors are special purpose limiters which are crimped or bolted to cables to clear and isolate faults quickly, increasing the reliability of service entrance and distribution runs. They are current-limiting with a 200,000A interrupting rating, yet will carry low cable overloads which are handled by standard protective devices. Cable protectors are rated in terms of cable size and material (Al or Cu). Heat shrinkable (HS) tubing can be specified for field installation. For cables smaller than 4/0, class J fuses can be used.

Crimp terminals for aluminum cable include oxide inhibitor; Fiberglass bodies for dimensional stability in harsh environments; Molded rubber boots or heat shrinkable tubing available for insulation and protection; Current limiting device; Permitted by National Electrical Code®; UL listed to File E305297; Catalog number stamped into terminal for permanent identification

$1,324.93 /EA
NOT CURRENTLY IN STOCK
CABLE FUSE 600V 500MCM C6-HS

CABLE FUSE 600V 500MCM C6-HS

Item #: CP500C6-HS

Supplier Part #: CP500C6-HS
Brand: Mersen
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/192494565f2228144e6d1d64fe0315f507ad052b.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/192494565f2228144e6d1d64fe0315f507ad052b.pdf
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/581e8059561658d6d4060b71c1f36953d329b0e6.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/581e8059561658d6d4060b71c1f36953d329b0e6.pdf

Mersen CP cable protectors are special purpose limiters which are crimped or bolted to cables to clear and isolate faults quickly, increasing the reliability of service entrance and distribution runs. They are current-limiting with a 200,000A interrupting rating, yet will carry low cable overloads which are handled by standard protective devices. Cable protectors are rated in terms of cable size and material (Al or Cu). Heat shrinkable (HS) tubing can be specified for field installation. For cables smaller than 4/0, class J fuses can be used.

Crimp terminals for aluminum cable include oxide inhibitor; Fiberglass bodies for dimensional stability in harsh environments; Catalog number stamped into terminal for permanent identification; Molded rubber boots or heat shrinkable tubing available for insulation and protection; Permitted by National Electrical Code®; UL listed to File E305297; Current limiting device

$1,648.67 /EA
NOT CURRENTLY IN STOCK
CABLE FUSE 600V 500MCM C7

CABLE FUSE 600V 500MCM C7

Item #: CP500C7

Supplier Part #: CP500C7
Brand: Mersen
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/192494565f2228144e6d1d64fe0315f507ad052b.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/192494565f2228144e6d1d64fe0315f507ad052b.pdf
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/581e8059561658d6d4060b71c1f36953d329b0e6.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/581e8059561658d6d4060b71c1f36953d329b0e6.pdf

Mersen CP cable protectors are special purpose limiters which are crimped or bolted to cables to clear and isolate faults quickly, increasing the reliability of service entrance and distribution runs. They are current-limiting with a 200,000A interrupting rating, yet will carry low cable overloads which are handled by standard protective devices. Cable protectors are rated in terms of cable size and material (Al or Cu). Heat shrinkable (HS) tubing can be specified for field installation. For cables smaller than 4/0, class J fuses can be used.

Fiberglass bodies for dimensional stability in harsh environments; Current limiting device; Catalog number stamped into terminal for permanent identification; Crimp terminals for aluminum cable include oxide inhibitor; Molded rubber boots or heat shrinkable tubing available for insulation and protection; Permitted by National Electrical Code®; UL listed to File E305297

$1,179.62 /EA
NOT CURRENTLY IN STOCK
CABLE FUSE 600V 500MCM C8

CABLE FUSE 600V 500MCM C8

Item #: CP500C8

Supplier Part #: CP500C8
Brand: Mersen
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/192494565f2228144e6d1d64fe0315f507ad052b.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/192494565f2228144e6d1d64fe0315f507ad052b.pdf
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/581e8059561658d6d4060b71c1f36953d329b0e6.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/581e8059561658d6d4060b71c1f36953d329b0e6.pdf

Mersen CP cable protectors are special purpose limiters which are crimped or bolted to cables to clear and isolate faults quickly, increasing the reliability of service entrance and distribution runs. They are current-limiting with a 200,000A interrupting rating, yet will carry low cable overloads which are handled by standard protective devices. Cable protectors are rated in terms of cable size and material (Al or Cu). Heat shrinkable (HS) tubing can be specified for field installation. For cables smaller than 4/0, class J fuses can be used.

Fiberglass bodies for dimensional stability in harsh environments; Molded rubber boots or heat shrinkable tubing available for insulation and protection; Current limiting device; Permitted by National Electrical Code®; Catalog number stamped into terminal for permanent identification; Crimp terminals for aluminum cable include oxide inhibitor; UL listed to File E305297

$1,152.86 /EA
NOT CURRENTLY IN STOCK
93198-FUSECABLE PROTECTO

93198-FUSECABLE PROTECTO

Item #: CP500C8-HS

Supplier Part #: CP500C8-HS
Brand: Mersen
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/192494565f2228144e6d1d64fe0315f507ad052b.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/192494565f2228144e6d1d64fe0315f507ad052b.pdf
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/581e8059561658d6d4060b71c1f36953d329b0e6.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/581e8059561658d6d4060b71c1f36953d329b0e6.pdf

Mersen CP cable protectors are special purpose limiters which are crimped or bolted to cables to clear and isolate faults quickly, increasing the reliability of service entrance and distribution runs. They are current-limiting with a 200,000A interrupting rating, yet will carry low cable overloads which are handled by standard protective devices. Cable protectors are rated in terms of cable size and material (Al or Cu). Heat shrinkable (HS) tubing can be specified for field installation. For cables smaller than 4/0, class J fuses can be used.

Molded rubber boots or heat shrinkable tubing available for insulation and protection; UL listed to File E305297; Current limiting device; Permitted by National Electrical Code®; Fiberglass bodies for dimensional stability in harsh environments; Catalog number stamped into terminal for permanent identification; Crimp terminals for aluminum cable include oxide inhibitor

$1,454.16 /EA
NOT CURRENTLY IN STOCK
CABLE FUSE 600V 600MCM A1

CABLE FUSE 600V 600MCM A1

Item #: CP600A1

Supplier Part #: CP600A1
Brand: Mersen
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/192494565f2228144e6d1d64fe0315f507ad052b.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/192494565f2228144e6d1d64fe0315f507ad052b.pdf
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/581e8059561658d6d4060b71c1f36953d329b0e6.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/581e8059561658d6d4060b71c1f36953d329b0e6.pdf

Mersen CP cable protectors are special purpose limiters which are crimped or bolted to cables to clear and isolate faults quickly, increasing the reliability of service entrance and distribution runs. They are current-limiting with a 200,000A interrupting rating, yet will carry low cable overloads which are handled by standard protective devices. Cable protectors are rated in terms of cable size and material (Al or Cu). Heat shrinkable (HS) tubing can be specified for field installation. For cables smaller than 4/0, class J fuses can be used.

Molded rubber boots or heat shrinkable tubing available for insulation and protection; Crimp terminals for aluminum cable include oxide inhibitor; Catalog number stamped into terminal for permanent identification; UL listed to File E305297; Permitted by National Electrical Code®; Current limiting device; Fiberglass bodies for dimensional stability in harsh environments

$2,363.21 /EA
NOT CURRENTLY IN STOCK
  • « PREV
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • NEXT »