Browse Categories

Search in Category

Fuses

Filter Your Search

Show Attribute Brand
Hide Attribute Connection
Hide Attribute Connection Type
Hide Attribute Country Of Origin
Hide Attribute Current
Hide Attribute Degree of protection (IP)
Hide Attribute Diameter
Hide Attribute Frequency
Hide Attribute Fuse Size
Hide Attribute Fuse Type
Hide Attribute Height
Hide Attribute Length
Hide Attribute Size
Hide Attribute Type
Hide Attribute Voltage
Hide Attribute Voltage Rating
Hide Attribute Weight
Hide Attribute Width
Hide Attribute Wire Type

Shop by Category

Fuses

Power Products/Fuses 
Viewing Page 207 of 1000 (10,000+ results)
Sort By:
View:
CABLE FUSE 600V 750MCM C1

CABLE FUSE 600V 750MCM C1

Item #: CP750C1

Supplier Part #: CP750C1
Brand: Mersen
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/192494565f2228144e6d1d64fe0315f507ad052b.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/192494565f2228144e6d1d64fe0315f507ad052b.pdf
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/581e8059561658d6d4060b71c1f36953d329b0e6.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/581e8059561658d6d4060b71c1f36953d329b0e6.pdf

Mersen CP cable protectors are special purpose limiters which are crimped or bolted to cables to clear and isolate faults quickly, increasing the reliability of service entrance and distribution runs. They are current-limiting with a 200,000A interrupting rating, yet will carry low cable overloads which are handled by standard protective devices. Cable protectors are rated in terms of cable size and material (Al or Cu). Heat shrinkable (HS) tubing can be specified for field installation. For cables smaller than 4/0, class J fuses can be used.

Molded rubber boots or heat shrinkable tubing available for insulation and protection; Crimp terminals for aluminum cable include oxide inhibitor; Current limiting device; Fiberglass bodies for dimensional stability in harsh environments; Catalog number stamped into terminal for permanent identification; UL listed to File E305297; Permitted by National Electrical Code®

$2,128.35 /EA
NOT CURRENTLY IN STOCK
93152-FUSECABLE PROTECTO

93152-FUSECABLE PROTECTO

Item #: CP750C1-HS

Supplier Part #: CP750C1-HS
Brand: Mersen
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/192494565f2228144e6d1d64fe0315f507ad052b.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/192494565f2228144e6d1d64fe0315f507ad052b.pdf
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/581e8059561658d6d4060b71c1f36953d329b0e6.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/581e8059561658d6d4060b71c1f36953d329b0e6.pdf

Mersen CP cable protectors are special purpose limiters which are crimped or bolted to cables to clear and isolate faults quickly, increasing the reliability of service entrance and distribution runs. They are current-limiting with a 200,000A interrupting rating, yet will carry low cable overloads which are handled by standard protective devices. Cable protectors are rated in terms of cable size and material (Al or Cu). Heat shrinkable (HS) tubing can be specified for field installation. For cables smaller than 4/0, class J fuses can be used.

Current limiting device; Molded rubber boots or heat shrinkable tubing available for insulation and protection; Crimp terminals for aluminum cable include oxide inhibitor; Catalog number stamped into terminal for permanent identification; Fiberglass bodies for dimensional stability in harsh environments; UL listed to File E305297; Permitted by National Electrical Code®

$2,752.75 /EA
NOT CURRENTLY IN STOCK
600V CABLE PROTECTOR 750MCM CA

600V CABLE PROTECTOR 750MCM CA

Item #: CP750C2

Supplier Part #: CP750C2
Brand: Mersen
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/192494565f2228144e6d1d64fe0315f507ad052b.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/192494565f2228144e6d1d64fe0315f507ad052b.pdf
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/581e8059561658d6d4060b71c1f36953d329b0e6.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/581e8059561658d6d4060b71c1f36953d329b0e6.pdf

Mersen CP cable protectors are special purpose limiters which are crimped or bolted to cables to clear and isolate faults quickly, increasing the reliability of service entrance and distribution runs. They are current-limiting with a 200,000A interrupting rating, yet will carry low cable overloads which are handled by standard protective devices. Cable protectors are rated in terms of cable size and material (Al or Cu). Heat shrinkable (HS) tubing can be specified for field installation. For cables smaller than 4/0, class J fuses can be used.

Current limiting device; Crimp terminals for aluminum cable include oxide inhibitor; Permitted by National Electrical Code®; Fiberglass bodies for dimensional stability in harsh environments; Catalog number stamped into terminal for permanent identification; UL listed to File E305297; Molded rubber boots or heat shrinkable tubing available for insulation and protection

$2,380.12 /EA
NOT CURRENTLY IN STOCK
CABLE FUSE 600V 750MCM C3

CABLE FUSE 600V 750MCM C3

Item #: CP750C3

Supplier Part #: CP750C3
Brand: Mersen
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/192494565f2228144e6d1d64fe0315f507ad052b.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/192494565f2228144e6d1d64fe0315f507ad052b.pdf
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/581e8059561658d6d4060b71c1f36953d329b0e6.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/581e8059561658d6d4060b71c1f36953d329b0e6.pdf

Mersen CP cable protectors are special purpose limiters which are crimped or bolted to cables to clear and isolate faults quickly, increasing the reliability of service entrance and distribution runs. They are current-limiting with a 200,000A interrupting rating, yet will carry low cable overloads which are handled by standard protective devices. Cable protectors are rated in terms of cable size and material (Al or Cu). Heat shrinkable (HS) tubing can be specified for field installation. For cables smaller than 4/0, class J fuses can be used.

Current limiting device; Crimp terminals for aluminum cable include oxide inhibitor; Catalog number stamped into terminal for permanent identification; Molded rubber boots or heat shrinkable tubing available for insulation and protection; UL listed to File E305297; Fiberglass bodies for dimensional stability in harsh environments; Permitted by National Electrical Code®

$2,136.00 /EA
NOT CURRENTLY IN STOCK
93754-FUSECABLE PROTECTO

93754-FUSECABLE PROTECTO

Item #: CP750C3-HS

Supplier Part #: CP750C3-HS
Brand: Mersen
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/192494565f2228144e6d1d64fe0315f507ad052b.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/192494565f2228144e6d1d64fe0315f507ad052b.pdf
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/581e8059561658d6d4060b71c1f36953d329b0e6.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/581e8059561658d6d4060b71c1f36953d329b0e6.pdf

Mersen CP cable protectors are special purpose limiters which are crimped or bolted to cables to clear and isolate faults quickly, increasing the reliability of service entrance and distribution runs. They are current-limiting with a 200,000A interrupting rating, yet will carry low cable overloads which are handled by standard protective devices. Cable protectors are rated in terms of cable size and material (Al or Cu). Heat shrinkable (HS) tubing can be specified for field installation. For cables smaller than 4/0, class J fuses can be used.

UL listed to File E305297; Catalog number stamped into terminal for permanent identification; Current limiting device; Fiberglass bodies for dimensional stability in harsh environments; Molded rubber boots or heat shrinkable tubing available for insulation and protection; Crimp terminals for aluminum cable include oxide inhibitor; Permitted by National Electrical Code®

$2,550.89 /EA
NOT CURRENTLY IN STOCK
CABLE FUSE 600V 750MCM C5

CABLE FUSE 600V 750MCM C5

Item #: CP750C5

Supplier Part #: CP750C5
Brand: Mersen
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/192494565f2228144e6d1d64fe0315f507ad052b.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/192494565f2228144e6d1d64fe0315f507ad052b.pdf
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/581e8059561658d6d4060b71c1f36953d329b0e6.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/581e8059561658d6d4060b71c1f36953d329b0e6.pdf

Mersen CP cable protectors are special purpose limiters which are crimped or bolted to cables to clear and isolate faults quickly, increasing the reliability of service entrance and distribution runs. They are current-limiting with a 200,000A interrupting rating, yet will carry low cable overloads which are handled by standard protective devices. Cable protectors are rated in terms of cable size and material (Al or Cu). Heat shrinkable (HS) tubing can be specified for field installation. For cables smaller than 4/0, class J fuses can be used.

Molded rubber boots or heat shrinkable tubing available for insulation and protection; Permitted by National Electrical Code®; Crimp terminals for aluminum cable include oxide inhibitor; Catalog number stamped into terminal for permanent identification; UL listed to File E305297; Fiberglass bodies for dimensional stability in harsh environments; Current limiting device

$2,335.26 /EA
NOT CURRENTLY IN STOCK
CABLE FUSE 600V 750MCM C5-HS

CABLE FUSE 600V 750MCM C5-HS

Item #: CP750C5-HS

Supplier Part #: CP750C5-HS
Brand: Mersen
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/192494565f2228144e6d1d64fe0315f507ad052b.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/192494565f2228144e6d1d64fe0315f507ad052b.pdf
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/581e8059561658d6d4060b71c1f36953d329b0e6.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/581e8059561658d6d4060b71c1f36953d329b0e6.pdf

Mersen CP cable protectors are special purpose limiters which are crimped or bolted to cables to clear and isolate faults quickly, increasing the reliability of service entrance and distribution runs. They are current-limiting with a 200,000A interrupting rating, yet will carry low cable overloads which are handled by standard protective devices. Cable protectors are rated in terms of cable size and material (Al or Cu). Heat shrinkable (HS) tubing can be specified for field installation. For cables smaller than 4/0, class J fuses can be used.

Crimp terminals for aluminum cable include oxide inhibitor; Catalog number stamped into terminal for permanent identification; Fiberglass bodies for dimensional stability in harsh environments; UL listed to File E305297; Current limiting device; Permitted by National Electrical Code®; Molded rubber boots or heat shrinkable tubing available for insulation and protection

$2,580.33 /EA
NOT CURRENTLY IN STOCK
CABLE FUSE 600V 750MCM C6

CABLE FUSE 600V 750MCM C6

Item #: CP750C6

Supplier Part #: CP750C6
Brand: Mersen
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/192494565f2228144e6d1d64fe0315f507ad052b.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/192494565f2228144e6d1d64fe0315f507ad052b.pdf
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/581e8059561658d6d4060b71c1f36953d329b0e6.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/581e8059561658d6d4060b71c1f36953d329b0e6.pdf

Mersen CP cable protectors are special purpose limiters which are crimped or bolted to cables to clear and isolate faults quickly, increasing the reliability of service entrance and distribution runs. They are current-limiting with a 200,000A interrupting rating, yet will carry low cable overloads which are handled by standard protective devices. Cable protectors are rated in terms of cable size and material (Al or Cu). Heat shrinkable (HS) tubing can be specified for field installation. For cables smaller than 4/0, class J fuses can be used.

Current limiting device; Molded rubber boots or heat shrinkable tubing available for insulation and protection; Fiberglass bodies for dimensional stability in harsh environments; UL listed to File E305297; Crimp terminals for aluminum cable include oxide inhibitor; Permitted by National Electrical Code®; Catalog number stamped into terminal for permanent identification

$2,152.52 /EA
NOT CURRENTLY IN STOCK
CABLE FUSE 600V 750MCM C6-HS

CABLE FUSE 600V 750MCM C6-HS

Item #: CP750C6-HS

Supplier Part #: CP750C6-HS
Brand: Mersen
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/192494565f2228144e6d1d64fe0315f507ad052b.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/192494565f2228144e6d1d64fe0315f507ad052b.pdf
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/581e8059561658d6d4060b71c1f36953d329b0e6.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/581e8059561658d6d4060b71c1f36953d329b0e6.pdf

Mersen CP cable protectors are special purpose limiters which are crimped or bolted to cables to clear and isolate faults quickly, increasing the reliability of service entrance and distribution runs. They are current-limiting with a 200,000A interrupting rating, yet will carry low cable overloads which are handled by standard protective devices. Cable protectors are rated in terms of cable size and material (Al or Cu). Heat shrinkable (HS) tubing can be specified for field installation. For cables smaller than 4/0, class J fuses can be used.

Current limiting device; Crimp terminals for aluminum cable include oxide inhibitor; Catalog number stamped into terminal for permanent identification; Permitted by National Electrical Code®; Molded rubber boots or heat shrinkable tubing available for insulation and protection; Fiberglass bodies for dimensional stability in harsh environments; UL listed to File E305297

$2,580.33 /EA
NOT CURRENTLY IN STOCK
CABLE FUSE 600V 750MCM C8

CABLE FUSE 600V 750MCM C8

Item #: CP750C8

Supplier Part #: CP750C8
Brand: Mersen
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/192494565f2228144e6d1d64fe0315f507ad052b.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/192494565f2228144e6d1d64fe0315f507ad052b.pdf
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/581e8059561658d6d4060b71c1f36953d329b0e6.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/581e8059561658d6d4060b71c1f36953d329b0e6.pdf

Mersen CP cable protectors are special purpose limiters which are crimped or bolted to cables to clear and isolate faults quickly, increasing the reliability of service entrance and distribution runs. They are current-limiting with a 200,000A interrupting rating, yet will carry low cable overloads which are handled by standard protective devices. Cable protectors are rated in terms of cable size and material (Al or Cu). Heat shrinkable (HS) tubing can be specified for field installation. For cables smaller than 4/0, class J fuses can be used.

Current limiting device; UL listed to File E305297; Fiberglass bodies for dimensional stability in harsh environments; Permitted by National Electrical Code®; Molded rubber boots or heat shrinkable tubing available for insulation and protection; Catalog number stamped into terminal for permanent identification; Crimp terminals for aluminum cable include oxide inhibitor

$2,182.83 /EA
NOT CURRENTLY IN STOCK
  • « PREV
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • NEXT »