Browse Categories

Search in Category

Fuses

Filter Your Search

Show Attribute Brand
Hide Attribute Connection
Hide Attribute Connection Type
Hide Attribute Country Of Origin
Hide Attribute Current
Hide Attribute Degree of protection (IP)
Hide Attribute Diameter
Hide Attribute Frequency
Hide Attribute Fuse Size
Hide Attribute Fuse Type
Hide Attribute Height
Hide Attribute Length
Hide Attribute Size
Hide Attribute Type
Hide Attribute Voltage
Hide Attribute Voltage Rating
Hide Attribute Weight
Hide Attribute Width
Hide Attribute Wire Type

Shop by Category

Fuses

Power Products/Fuses 
Viewing Page 149 of 1000 (10,000+ results)
Sort By:
View:
FUS AM NH3 C/P 500A

FUS AM NH3 C/P 500A

Item #: M216188

Supplier Part #: M216188
Brand: Mersen
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/0cc40d2113263e434aa03bb0405dd8d9fd900a99.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/0cc40d2113263e434aa03bb0405dd8d9fd900a99.pdf

The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current, it must be handled by a qualified professional.

0% cadmium; Lead free contact blades; Dimensions according to DIN 43 620 Parts 1 to 4; VDE 0636 Part 201; IEC 60269-1 and -2

$454.74 /EA
NOT CURRENTLY IN STOCK
D01/D02 ABDECKUNG 3-POL

D01/D02 ABDECKUNG 3-POL

Item #: M216579

Supplier Part #: M216579
Brand: Mersen
NEOZED D0 fuse-bases 400VAC Data Sheet NEOZED D0 fuse-bases 400VAC Data Sheet
NEOZED D0 fuse-bases 400VAC Data Sheet NEOZED D0 fuse-bases 400VAC Data Sheet

The D0 fuse-system is installed in low voltage ditribution units, where fuse-links are accessible to non trained persons and can also be replaced by them. This system is the newest generation of screw fuse-system in the german DIN standard and is designed for 400VAC/250VDC networks. The D0 fuse-bases are available in the sizes D01, D02 and D03. D0 fuse-bases are used in combination with D0 fuse-links for the protection of cables and power lines. D0 fuse-links limit and cut-off unacceptable overcurrents and short circuit currents up to their nominal breaking capacity. They also protect equipments and installations against dynamic effects of high short circuit currents.

Low power dissipation; Top and bottom contacts made of nickel plated copper alloy; Safe cut-off short circuits and over currents due to special design of fuse element; Clear indication of operation condition due coloured indicator un top contact; Optimized size; Resistant to aging; Insulated body suitable for high mechanical and thermal impacts

$14.48 /EA
NOT CURRENTLY IN STOCK
DII-RING-PASSEINSATZ 16A

DII-RING-PASSEINSATZ 16A

Item #: M217131

Supplier Part #: M217131
Brand: Mersen
D fuse-bases Data Sheet D fuse-bases Data Sheet
D fuse-bases Data Sheet D fuse-bases Data Sheet

The D fuse-system is the first generation of the screw fuse-system in the german DIN standard. It is still used in many installations. Applications are low voltage ditribution units, where non trained persons are allowed to change the fuse-links. The D fuse-range comprises the sizes NDZ, DII, DIII, DIV, DV. The range of applications for D fuse-links gG is the protection of cables and power lines. They limit and cut off unacceptable overcurrents and short circuit currents up to their nominal breaking capacity. D fuse-links gG also protect equipments and installations against dynamic effects of high short circuit currents.

Low power dissipation; Clear indication of operation condition due to coloured indicator on top contact; Insulated body suitable for high mechanical and thermal impacts; Optimized size; Safe cut off short circuits and over currents due to special design of fuse element; Resistant to aging; Free of lead, cadmium, mercury, chrome 6 (rohs conformity); Top and bottom contacts made of nickel plated copper alloy

Call
NOT CURRENTLY IN STOCK
690V CP 14X51 AM 12A S/I FS
690V CP 14X51 AM 12A S/I FS
690V CP 14X51 AM 12A S/I FS

690V CP 14X51 AM 12A S/I FS

Item #: M217177

Supplier Part #: M217177
Brand: Mersen
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/8eb7718b1eb56db2c3cb8b2929696ece55836650.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/8eb7718b1eb56db2c3cb8b2929696ece55836650.pdf
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/fdbcdd2b0843c57baa25d47511d69b3be42c5c09.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/fdbcdd2b0843c57baa25d47511d69b3be42c5c09.pdf

Mersen aM and gG fuse-links cover a wide range of physical sizes and ampere ratings for 400, 500, and 690VAC for protection in electrical distribution circuits and various industrial applications. Most ratings are available in size 8x31 and size 10x38 with an optional indicator, and in size 14x51 and 22x58 with an optional striker to activate an auxiliary contact. Size 10x38 is also available with striker. All cylindrical fuse-links have ceramic bodies and silver-plated contacts. Cylindrical fuse-links "aM" are partial range fuses. They protect electrical devices in case of unacceptable high short-circuit against destruction due high current limiting and low thermal let-through values. They cut off currents more than 6.3xln until the maximum breaking capacity (rated breaking capacity). Cylindrical fuse-links "aM" are mainly used for the protection of installation switch gear in otor circuit currents. For classification of the cylindrical fuse-links the nominal current of the fuse-link can be selected respective to the nominal current of the motor. Our technology and process was designed to ensure highly reliable technical performance.

Reduced size; Safest and most reliable protection system; Striker version available for remote indication of fuse operation; Approved by Lloyd’s Register of Shipping and Bureau Veritas; IEC 60269-1 & -2

$19.40 /EA
NOT CURRENTLY IN STOCK
NH 3 450A 500V GG
NH 3 450A 500V GG
NH 3 450A 500V GG

NH 3 450A 500V GG

Item #: M217223

Supplier Part #: M217223
Brand: Mersen
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/529f793357efbdfcd7a5582fc35034fb84060c57.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/529f793357efbdfcd7a5582fc35034fb84060c57.pdf

The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "gG" NH fuse-links are full range breaking capacity fuse-links and are used to protect cables and equipment. They can interrupt any current surge, from the lowest fusing current up to their breaking capacity, and so can be used alone as protection. They also protect electrical devices and industrial set-ups from the electrodynamic effects of very high short-circuit currents.

Dimensions according to DIN 43 620 parts 1 to 4; IEC 60269-1 and -2; Lead free contact blades; Double indicator; Non-isolated gripping lugs; 0% cadmium; VDE 0636 Part 201

$366.42 /EA
NOT CURRENTLY IN STOCK
DIV-SICHEINSATZ 100A GL-GG
DIV-SICHEINSATZ 100A GL-GG
DIV-SICHEINSATZ 100A GL-GG

DIV-SICHEINSATZ 100A GL-GG

Item #: M217637

Supplier Part #: M217637
Brand: Mersen
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/42ad2d530ea3d0fe78e88b3e3a5636ab02287f27.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/42ad2d530ea3d0fe78e88b3e3a5636ab02287f27.pdf

The D fuse-system is the first generation of screw fuse-system in the german DIN standard. It is still used in many installations. Applications are low voltage ditribution units, where non trained persons are allowed to change the fuse-links. The D fuse range comprises the sizes NDZ, DII, DIII, DIV, DV. The range of applications for D fuse-links is the protection of cables and power lines. They limit and cut-off unacceptable overcurrents and short circuit currents up to their nominal breaking capacity. D fuse-links "gG" also protect equipments and installations against dynamic effects of high short circuit currents.

Low power dissipation; Free of lead, cadmium, mercury, chrome 6 (rohs conformity); Safe cut-off short circuits and over currents due to special design of fuse element; Insulated body suitable for high mechanical and thermal impacts; Top and bottom contacts made of nickel plated copper alloy; Clear indication of operation condition due to coloured indicator on top contact; Optimized size; DIN VDE 0636-301; Resistant to aging

$148.66 /EA
NOT CURRENTLY IN STOCK
BASE SEC CC8 F/RAIL 1P

BASE SEC CC8 F/RAIL 1P

Item #: M218212

Supplier Part #: M218212
Brand: Mersen
CC10 CC10
CC14 CC14
CC22 Data Sheet CC22 Data Sheet
Compact fuse-holders CC8 Compact fuse-holders CC8

The innovative and comprehensive range of Mersen fuse-holders. CC fuse-holders are available in 1, 2, 3 poles, in IEC version in a very special compact design. Multi-pole units can also be field assembled by ordering pin-ties assembly kit. CC range is made of tough and durable thermoplastic material.

Very compact design for small space applications; Panel mounted for all sizes; DIN rail mounted sizes 14×51 and 22×58

Call
NOT CURRENTLY IN STOCK
FUS AM NH1 C/P 100A

FUS AM NH1 C/P 100A

Item #: M218235

Supplier Part #: M218235
Brand: Mersen
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/0cc40d2113263e434aa03bb0405dd8d9fd900a99.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/0cc40d2113263e434aa03bb0405dd8d9fd900a99.pdf

The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current, it must be handled by a qualified professional.

IEC 60269-1 and -2; Lead free contact blades; Dimensions according to DIN 43 620 Parts 1 to 4; 0% cadmium; VDE 0636 Part 201

$285.65 /EA
NOT CURRENTLY IN STOCK
DIII-RING-PASSEINSATZ 2A

DIII-RING-PASSEINSATZ 2A

Item #: M218672

Supplier Part #: M218672
Brand: Mersen
D fuse-bases Data Sheet D fuse-bases Data Sheet
D fuse-bases Data Sheet D fuse-bases Data Sheet

The D fuse-system is the first generation of the screw fuse-system in the german DIN standard. It is still used in many installations. Applications are low voltage ditribution units, where non trained persons are allowed to change the fuse-links. The D fuse-range comprises the sizes NDZ, DII, DIII, DIV, DV. The range of applications for D fuse-links gG is the protection of cables and power lines. They limit and cut off unacceptable overcurrents and short circuit currents up to their nominal breaking capacity. D fuse-links gG also protect equipments and installations against dynamic effects of high short circuit currents.

Low power dissipation; Free of lead, cadmium, mercury, chrome 6 (rohs conformity); Safe cut off short circuits and over currents due to special design of fuse element; Clear indication of operation condition due to coloured indicator on top contact; Optimized size; Resistant to aging; Top and bottom contacts made of nickel plated copper alloy; Insulated body suitable for high mechanical and thermal impacts

Call
NOT CURRENTLY IN STOCK
690V NH1 C/P gG 100A
690V NH1 C/P gG 100A
690V NH1 C/P gG 100A

690V NH1 C/P gG 100A

Item #: M219270

Supplier Part #: M219270
Brand: Mersen
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/5b4e2a933642693c3e96aad042c89b6a2c8b2c2c.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/5b4e2a933642693c3e96aad042c89b6a2c8b2c2c.pdf

The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "gG" NH fuse-links are full range breaking capacity fuse-links and are used to protect cables and equipment. They can interrupt any current surge, from the lowest fusing current up to their breaking capacity, and so can be used alone as protection. They also protect electrical devices and industrial set-ups from the electrodynamic effects of very high short-circuit currents.

Dimensions according to DIN 43 620 Parts 1 to 4; VDE 0636 Part 201; Lead free contact blades; 0% cadmium; IEC 60269-1 and -2

$267.91 /EA
NOT CURRENTLY IN STOCK
  • « PREV
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • NEXT »